WEG 07536ET3H365JP-W22 12712311 Pump Motor, 75 HP, 3600 RPM, 575V, TEFC, 365JP, Footed, Close CoupLED Pump
3600 rpm
75 hp
365JP
Get it by Tuesday, Jul 14
€12,969.01 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Close-Coupled Pump Motor |
| Altitude | 1000 M.A.S.L. |
| Ambient Temp. | -20°C to +40°C |
| Amps | 65.5A |
| Bearing Cap | Yes |
| Break Down Torque | 250% |
| Cold Locked Rotor Time | 18 sec. |
| Composition | Cast Iron |
| Connection Cables Quantity | 6 |
| De Bearing Seal | Lip Seal |
| Degree Of Protection | IP55 |
| Design | B |
| Drain | Rubber, Automatic |
| Drip Cover | Without |
| Duty Cycle | S1 |
| Efficiency 50% | 92.4% |
| Efficiency 75% | 93.6% |
| Efficiency @ 100% | 93.6% |
| Enclosure | IC411 |
| Enclosure Rating | IC411 |
| Enclosure Type | Tefc |
| Fan Cover Material | Cast Iron |
| Fan Material | Plastic |
| Flange | C |
| Frame | 365JP |
| Frame Material | Cast Iron |
| Frame Size | 364/5JP |
| Frequency | 60 Hz |
| Grade | Grade 1010/20 |
| Grounding Lugs | Double |
| Grounding Lugs Type | Double |
| Hp | 75 hp |
| Impregnation Method | Constant Resin Flow |
| Insulation Class | Class F |
| L. R. Amps | 439A |
| Locked Rotor Time (cold) | 18 sec. |
| Locked Rotor Time(hot) | 10 sec. |
| Locked Rotor Torque | 200% |
| Lrc | 6.7x(Code G) |
| Main Terminal Box Hole | 3" |
| Main Terminal Box Hole Type | NPT |
| Main Terminal Box Type | NPT |
| Material | Carbon Steel |
| Moment Of Inertia (j) | 11.9 lbs.-sq. ft. |
| Mounting | F-1 |
| Nde Bearing Seal | Lip Seal |
| No Load Amps | 16A |
| No. Of Poles | 2 |
| Noise Level | 79 dBA |
| Output Rating | 75 hp |
| Overload Protection | No |
| Overload Protector (phenolic) | Without Overload Protector |
| Painting | Only Primer |
| Phase | 3 |
| Power Factor 100% | 0.9 |
| Power Factor 50% | 0.83 |
| Power Factor 75% | 0.88 |
| Product Datasheet | weg-07536et3h365jp-w22.pdf |
| Pump Seal | Gasket |
| Regreasing System | At Drive End And Non-Drive End |
| Rotation | CW, CCW |
| Screw Cap | Carbon Steel |
| Service Factor | 1.25 |
| Shaft Material | Carbon Steel |
| Slip | 1.25% |
| Speed | 3400-3600 RPM , 3555 RPM |
| Starting Method | Direct On Line |
| Synchronous Speed | 3600 RPM |
| Temp. Rise | 80 K |
| Terminal Block | Without |
| Terminal Box | Left Position |
| Torque | 111 lbs.-ft. |
| Tropicalized Painting | Without |
| Voltage | 575V , 575V AC |
Shipping Info:
| Ship weight (kg) | 448.65 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Documentation:
Product Variants
| Model | Voltage | Frequency | Hp | Service Factor | Motor Enclosure Design | Full Load Amps | Motor Type | Mounting Type | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 01836ET3Y160LFF-W22 | 380-415/460V | 50 Hz | 25 hp | 1.25 | Totally Enclosed Fan Cooled | 29.9A | - | Face, Base | €5,367.05 | |
| 03736ET3Y200LFF-W22 | 380-415/460V | 60 Hz | 50 hp | 1.25 | Totally Enclosed Fan Cooled | 59.8A | - | Face, Base | €9,770.55 | |
| 05536ET3Y250S/MFF-W2 | 460V AC | 50/60 Hz | 75 hp | 1.25 | Totally Enclosed Fan Cooled | 80.3A | - | Face, Base | €16,526.29 | |
| 00156ET3H143TC-W22 | 575V AC | 60 Hz | 1 1/2 hp | 1.25 | Totally Enclosed Fan Cooled | 1.57A | Three Phase | Rigid Base | €840.81 | |
| 00236ET3H145TC-W22 | 575V AC | 60 Hz | 2 hp | 1.25 | Totally Enclosed Fan Cooled | 2.05A | Three Phase | Rigid Base | €853.67 | |
| 00336ET3H182TC-W22 | 575V | 60 Hz | 3 hp | 1 | Totally Enclosed Fan Cooled | 2.9A | Three Phase | Rigid Base | €1,055.20 | |
| 00536ET3H184TC-W22 | 575V AC | 60 Hz | 5 hp | 1.25 | Totally Enclosed Fan Cooled | 4.72A | Three Phase | Rigid Base | €1,251.50 |
Explore Products
- APPROVED VENDOR 82814 Pipe Nipple Schedule 160 1 1/2 x 10 In
- FOREVERBOLT FBCPM8P10 Coupling Nut, 24mm Length, M8-1.25 Thread Size, 18-8 Grade
- E JAMES & CO 5389-1/4HGA Rubber Buna-n 1/4 Inch Thick 12 x 12 In
- HALLOWELL UESVP3258-6A-PT Box Locker, 36 Inch x 15 Inch x 78 in, 6 Tiers, 3 Units Wide, Clearview, Electronic Keypad
- STEARNS BRAKES 105653100EHF Brake Assembly
- ARO 637370 Piston Pump Conversion Kit
- OSG VGM5-1174 Carbide End Mill, 5 Flutes, 3/4 Inch Milling Dia., 15/16 Inch Length Of Cut
- BALDOR / DODGE 13Q07L56 TIGEAR-2 Right Angle Reducer
Explore More
- KEYSHAFT
- Mechanical Machining Shears
- Tower Light Sounder Tiers
- Power Distribution Blocks
- Arbor Press
- Clip Bearings
- PLAST-O-MATIC PRAM Series Air Loaded Pressure Regulators
- CHICAGO PNEUMATIC Industrial Maintenance Air Hammers
- VIBCO V Series Pneumatic Ball Vibrators
- ANVIL AS1100 Series Rigid Steel Conduit Clamps, Electro Galvanized
- ARCH CUTTING TOOLS VNMG Series, Diamond Carbide Inserts
- VULCAN HART Shaft
- SPEARS VALVES PVC 125 PSI PIP Fabricated Fitting 30 Deg. Elbows, Socket x Socket
- BALDOR / DODGE Seal Assemblies Bearings
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WEG 07536ET3H365JP-W22 12712311 Pump Motor, 75 HP, 3600 RPM, 575V, TEFC, 365JP, Footed, Close CoupLED Pump
€12,969.01 /unit