WEG 01536ET3H254T-SG 14331206 Pump Motor, 15 HP, 3600 RPM, 575V, TEFC, 254T, Footed
3600 rpm
15 hp
254T
Get it by Tuesday, Aug 25
€2,160.61 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Altitude | 1000 m.a.s.l. , 1000 MASL |
| Ambient Temp. | -20°C to +40°C |
| Amps | 13.9A |
| Balancing Method | 1/2 Key , 1/2" Key |
| Bearing Cap | Yes |
| Bolt Material | Carbon Steel |
| Break Down Torque | 300% |
| Cold Locked Rotor Time | 25 sec. |
| Connection Cables Quantity | 6 |
| De Bearing Seal | V Ring |
| Degree Of Protection | IP55 |
| Design | B |
| Drain | Rubber, Automatic |
| Drip Cover | Without |
| Duty Cycle | Cont.(S1) , Continuous |
| Efficiency 50% | 73% |
| Efficiency @ 1 % | 87% |
| Efficiency @ 75 % | 83% |
| Enclosure Rating | IC411 |
| Enclosure Type | Tefc |
| Fan Cover Material | Steel |
| Fan Material | Plastic |
| Flange | Without |
| Flange Type | Without |
| Frame | 254/6T |
| Frame Material | Rolled Steel |
| Frame Size | 254T |
| Frequency | 60 Hz |
| Grade | Grade 1010/20 |
| Grounding Lugs | Superior |
| Grounding Lugs Type | Superior |
| Hot Locked Rotor Time | 14 sec. |
| Hp | 15 hp |
| Impregnation Method | Dip And Bake Polyester |
| Insulation Class | F |
| L. R. Amps | 94.7A |
| Locked Rotor Time(hot) | 14 sec. |
| Locked Rotor Torque | 200% |
| Lrc | 6.8X(Code G) |
| Main Terminal Box Hole Size | 1.732" |
| Material | Carbon Steel |
| Moment Of Inertia | 0.8718 lbs.-sq. ft. |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Speed | 3525 RPM |
| Mounting | Foot Mounted , Foot-Mounted, F-1 |
| Nde Bearing Seal | No |
| No Load Amps | 5.2A |
| No. Of Poles | 2 |
| Noise Level | 75 dBA |
| Output | 15 hp |
| Output Rating | 15 hp |
| Overload Protector | Without Overload Protector |
| Overload Protector (phenolic) | Without Overload Protector |
| Painting | Munsell N 1-Matte 207N (ISO 12944-C2) , Only Primer |
| Phase | 3 |
| Power Factor @ 1 % | 91 |
| Power Factor @ 50 % | 89.5 |
| Power Factor @ 75 % | 91 |
| Product Datasheet | weg-01536et3h254t-sg.pdf |
| Regreasing System | At Drive End And Non Drive End , At Drive End And Non-Drive End |
| Resilient Base | Without |
| Rotation | CW And CCW , CW, CCW |
| Service Factor | 1.15 |
| Shaft Material | Carbon Steel , SAE 1040/45 Carbon Steel |
| Shaft Material Grade | Grade 1040/45 |
| Slip | 2.08% |
| Speed | 3400-3600 RPM |
| Starting Method | Direct On Line |
| Synchronous Speed | 3600 RPM |
| Temp. Rise | 80 K |
| Terminal Block | Without |
| Terminal Box | Left Position |
| Torque | 22.3 lbs.-ft. |
| Tropicalized Painting | Without |
| Voltage | 575V , 575V AC |
Shipping Info:
| Ship weight (kg) | 85.06 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Documentation:
Product Variants
| Model | Voltage | Frequency | Hp | Service Factor | Motor Enclosure Design | Full Load Amps | Motor Type | Mounting Type | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 01836ET3Y160LFF-W22 | 460V | 50 Hz | 25 hp | 1.25 | Totally Enclosed Fan Cooled | 29.9A | - | Face, Base | €5,367.05 | |
| 03736ET3Y200LFF-W22 | 460V | 60 Hz | 50 hp | 1.25 | Totally Enclosed Fan Cooled | 59.8A | - | Face, Base | €9,770.55 | |
| 05536ET3Y250S/MFF-W2 | 460V AC | 50/60 Hz | 75 hp | 1.25 | Totally Enclosed Fan Cooled | 80.3A | - | Face, Base | €16,526.29 | |
| 00156ET3H143TC-W22 | 575V AC | 60 Hz | 1 1/2 hp | 1.25 | Totally Enclosed Fan Cooled | 1.57A | Three Phase | Rigid Base | €840.81 | |
| 00236ET3H145TC-W22 | 575V AC | 60 Hz | 2 hp | 1.25 | Totally Enclosed Fan Cooled | 2.05A | Three Phase | Rigid Base | €853.67 | |
| 00336ET3H182TC-W22 | 575V | 60 Hz | 3 hp | 1 | Totally Enclosed Fan Cooled | 2.9A | Three Phase | Rigid Base | €1,055.20 | |
| 00536ET3H184TC-W22 | 575V AC | 60 Hz | 5 hp | 1.25 | Totally Enclosed Fan Cooled | 4.72A | Three Phase | Rigid Base | €1,251.50 |
Explore Products
- TACO 0015E3-SF4 Circulator Pump with ECM Permanent Magnet Motor, Universal, Stainless Steel
- PARKER 50-UPGRADE-406MM-B Upgrade Kit, 50 mm Size
- OSG 5315500 Square End Mill, Bright, Center Cutting, 3 Flutes, 1 1/2 Inch Milling Dia.
- NEXTTEQ NX189 Detector Tube, Methyl Methacrylate, 10 To 160 Ppm
- INGERSOLL-RAND 317A-825 Backing Pad, 3 Inch and 5 Inch Size, 18,000 RPM
- APPROVED VENDOR NB-572-3SP Valve Stem
- REGAL 090453RM Carbide End Mill, Ball Nose, 5/8 Inch Dia., 6 Inch Length, 4 Flutes, Bright
- APOLLO VALVES 87A70038 SS Standard Port Ball Valve with PEEK Seat and Graphite Packing 3 Inch Size, 2 x Flange, silver, yellow
Explore More
- ADVANCE TABCO
- CLECO TOOLS
- DRANETZ
- KEYSHAFT
- CHEMSTOP
- Hard Hat Cooling Products
- PVC and CPVC Pipe
- Rubber Hose Accessories
- Cable Hoists and Ratchet Pullers
- Chemical Resistant and Disposable Clothing Accessories
- AKRO-MILS 30293 Akrobins Super Size Bins
- CAIMAN Unlined Lean-On Patch TIG Welding Gloves
- LOUISVILLE L-2032 Series Aluminum Sawhorse Scaffolds
- KEO Countersink Sets, Carbide
- MUELLER INDUSTRIES 792F Duplex Basket Strainers
- HAYWARD YS Series Y-strainer 1/2 Inch
- VULCAN HART Top Panel Angle
- E JAMES & CO Rubber Strips
- APPROVED VENDOR #10-24 Fully Threaded Standard Phillips Pan Cadmium Plated Steel Rounded Machine Screws
- TRIM LOK INC Rubber Edge Trim Seals
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WEG 01536ET3H254T-SG 14331206 Pump Motor, 15 HP, 3600 RPM, 575V, TEFC, 254T, Footed
€2,160.61 /unit