WEG .5018OT1B48-S 13039493 General Purpose Motor, ODP RolLED Steel 48 Frame, 0.5 HP, 1730 RPM, 115/208-230 V
1800 rpm
0.50 hp
48
115/208-230V
Get it by Tuesday, Apr 7
5.00% off
€401.29 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Altitude | 1000 M.A.S.L. , 1000 MASL |
| Ambient Temp. | -20°C to +40°C |
| Balancing Method | Not Balanced |
| Bearing Cap | No |
| Bolt Material | Carbon Steel |
| Break-down Torque | 270% |
| Breakdown Torque | 270% |
| Cable Press Material | Sem |
| Cc Number | CC029A |
| Cold Locked Rotor Time | 27 sec. |
| Design | N |
| Drip Cover | Without |
| Duty Cycle | S1 |
| Efficiency @ 100% | 76.2% |
| Efficiency @ 50% | 65% |
| Efficiency @ 75% | 73% |
| Efficiency At 1 % | 87% |
| Efficiency At 50 % | 72% |
| Efficiency At 75 % | 81% |
| Enclosure | IC01 |
| Enclosure Type | ODP |
| Fan Cover Material | Without Fan Cover |
| Fan Material | Without Fan |
| Flange | Without |
| Flange Type | Without |
| Frame | 48 |
| Frame Material | Rolled Steel |
| Frequency | 60 Hz |
| Full Load Amps | 4.86/34-2.43A |
| Full Load Amps @ 50hz | 5.5/3-2.7A |
| Grounding Lugs | Single |
| Hot Locked Rotor Time | 15 sec. |
| Hp | 1/2 hp |
| Impregnation Method | Dip And Bake Polyester |
| Ins. Class | Class F |
| Insulation Class | Class F |
| Inverter Rated | No |
| L. R. Amps | 37.4/23.4-18.7A |
| L.r. Amperes | 18.7-23.4/37.4A |
| Length Less Shaft | 8 3/4" |
| Locked Rotor Time (cold) | 27 sec. |
| Locked Rotor Time (hot) | 15 sec. |
| Locked Rotor Torque | 300% |
| Lrc | 7.7X(Code K) |
| Manufacturers Warranty Length | 3 yrs. |
| Max. Ambient Temp. | 104°F |
| Moment Of Inertia | 0.052 lbs.-sq. ft. |
| Moment Of Inertia (j) | 0.052 lbs.-sq. ft. |
| Motor Application | General Application |
| Motor Bearings | Ball |
| Motor Design | Capacitor Start/Run |
| Motor Enclosure Design | Open Dripproof |
| Motor Frame Material | Steel |
| Motor Mounting Position | All Angle |
| Motor Mounting Type | Rigid Base |
| Motor Service Factor | 1.25 |
| Motor Shaft Rotation | CW/CCW |
| Motor Speed | 1730 RPM |
| Mounting | F-1 , Foot Mounted |
| Nameplate Rpm | 1730 RPM |
| Nema Design | NEMA N |
| No Load Amps | 1.16-1.35/2.7A , 2.7/1.16-1.35A |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Noise Level | 50 dBA |
| Nominal Efficiency | 76.2% |
| Output | 1/2 hp |
| Output Rating | 1/2 hp |
| Overall Length | 10 1/4" |
| Overload Protection | No |
| Overload Protector | Without Overload Protector |
| Painting | Only Primer |
| Phase | 1 |
| Power Factor 50% | 0.72 |
| Power Factor 75% | 0.81 |
| Power Factor At 1 % | 76.2 |
| Power Factor At 50 % | 65 |
| Power Factor At 75 % | 73 |
| Power Factor_100% | 0.87 |
| Rated Current | 2.43-3.04/4.86A , 4.86/3.04-2.43A |
| Rated Speed | 1730 RPM |
| Rated Torque | 1.52 lbs.-ft. |
| Rated Voltage | 115/208-230V , 115/208-230V AC |
| Resilient Base | Without |
| Rotation | CW/CCW |
| Rpm | 1700-1800 RPM |
| Service Factor | 1.25 |
| Shaft Dia. | 1/2" |
| Shaft Length | 1 1/2" |
| Shaft Material | Carbon Steel |
| Shaft Material Grade | Grade 1040/45 |
| Slip | 3.89% |
| Standards | Csa, Ul |
| Starting Method | Direct On Line |
| Synchronous Speed | 1800 RPM |
| Temp. Rise | 80 K |
| Terminal Box | Without Terminal Box |
| Tropicalized Painting | Without |
| Usable @ 200v | No |
| Usable @ 208v | Yes |
| Voltage | 115/208-230V AC |
Shipping Info:
| Ship weight (kg) | 10.71 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 26.04 |
| Ship width (cm) | 2.54 |
Product Variants
| Product | Model | Voltage | Service Factor | Hp | Nameplate Rpm | Full Load Amps | Frame | Rpm | Synchronous Speed | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
00218OT1B56-S | 115/208-230V AC | 1.15 | - | - | - | 56H | 1700-1800 RPM | 1800 RPM | €746.87 | |
 |
00718OS1F215T | 230/460V | 1.15 | 7 1/2 hp | - | - | 213/5T | 1700-1800 RPM | 1800 RPM | €1,146.55 | |
|
00236OT1B56-S | 115/208-230V AC | 1.15 | 2 hp | - | - | 56H | 3400-3600 RPM | 3600 RPM | €578.65 | |
 |
00536OS1E184T | 208-230/460V | - | 5 hp | - | - | 184T | 3400-3600 RPM | - | €961.68 | |
 |
.7518OT1B56-S | 115/208-230V AC | 1.25 | - | - | - | 56 | 1700-1800 RPM | 1800 RPM | €461.73 | |
 |
.5018OT1BW56C-S | 115/208-230V AC | 1.25 | 1/2 hp | - | - | W56C | 1700-1800 RPM | 1800 RPM | €399.67 | |
|
00118OT1BO56-S | 115/208-230V AC | 1.15 | 1 hp | - | - | 56 | 1700-1800 RPM | 1800 RPM | €522.56 |
Explore Products
- SUPCO SW-ABFC05K
- WINSMITH E26MDVDG1000Q0 Worm Gear Reducer, Right Angle Double Worm Gear, Quill Input, Solid Output Shaft
- EATON E30KA350 Pushbutton, 30.5 mm, Type A, Short, Green Actuator, Blank Legend, 3/16 Inch Letter Size
- CLEVELAND C48823 2727 Jobber Length Drill Bit, 15/32 Inch Size, 5 3/4 Inch Overall Length
- STEARNS BRAKES 840480301 Compression Spring
- NIBCO NL7K02E T-433-Y Check Valve, Female NPT Thread, 2 1/2 Inch Size, Bronze, PTFE Disc
- MORSE DRUM 5-45-15.5 Drum Cone, 45 Degree, #15.5
- CONTINENTAL HZY07530-100-G Air Hose, 3/4 Inch Hose Inside Dia, Yellow, 300 PSI
Explore More
- DUTTON-LAINSON
- ENM
- KEYSHAFT
- EDSON
- FLUORAMICS
- Pipe and Tubing Cutters
- Cutting Torches
- Safety Can Accessories
- Manual Strapping Sealers and Tensioners
- Deadlatch Hardware
- PROTO Flex Impact Socket, 1/2 Inch Drive Size, Imperial, Standard
- JACKSON SAFETY Due North All-Purpose Ice Traction Aids-Replaceable Spikes
- MAYHEW TOOLS Hollow Punches, SAE
- ANVIL 261SSG Series Riser Clamps, 304 Stainless Steel
- ANVIL AF735 Series Multi-Size Lateral Brace Attachments, Plain
- SHARPE VALVES CF8M Stainless Steel Gate Valve, Flange
- WESCO Fork Extensions
- EATON NEMA Starters
- HUSQVARNA Diamond Saw Blades
- HILMAN ROLLERS T Style Rollers
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WEG .5018OT1B48-S 13039493 General Purpose Motor, ODP RolLED Steel 48 Frame, 0.5 HP, 1730 RPM, 115/208-230 V
€422.40 /unit