WEG 02518ET3E284T-W22G 12700685 Air Handling Motor, 25 HP, 1800 RPM, 208/230/460 V, 3 Phase, TEFC, 284/6T Frame, Footed, HVAC with Internal Shaft Grounding Rings
1800 rpm
25 hp
286T
Get it by Tuesday, Aug 25
5.00% off
€4,989.20 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Altitude | 1000 M.A.S.L. , 1000 MASL |
| Ambient Temp. | -20°C to +40°C |
| Amps | 29.5/59-65.2A , 65.2-59/29.5A |
| Balancing Method | 1/2" Key |
| Bearing Cap | Yes |
| Break Down Torque | 270% |
| Cold Locked Rotor Time | 43 sec. |
| Composition | Cast Iron |
| Connection Cables Quantity | 12 |
| Design | B |
| Drain | Rubber, Automatic |
| Drip Cover | Without |
| Duty Cycle | S1 |
| Efficiency 50% | 70% , 92.4% |
| Efficiency 75% | 93% |
| Efficiency @ 1 % | 84% |
| Efficiency @ 100% | 93.6% |
| Efficiency @ 75 % | 80% |
| Enclosure | IC411 |
| Enclosure Type | Tefc |
| Fan Cover Material | Cast Iron |
| Fan Material | Plastic |
| Flange | Without |
| Flange Type | Without |
| Frame | 284/6T |
| Frame Material | Cast Iron |
| Frequency | 50/60 Hz , 60 Hz |
| Grounding Lugs | Single |
| Hot Locked Rotor Time | 24 sec. |
| Hp | 25 hp |
| Impregnation Method | Dip And Bake Polyester |
| Insulation Class | Class F |
| L. R. Amps | 183/366-404A , 404-366/183A |
| Locked Rotor Time (cold) | 43 sec. |
| Locked Rotor Time(hot) | 24 sec. |
| Locked Rotor Torque | 240% |
| Lrc | 6.2X(Code G) |
| Main Terminal Box Hole | 1 1/2" |
| Main Terminal Box Hole Size | 1 1/2" |
| Main Terminal Box Hole Type | NPT |
| Main Terminal Box Type | NPT |
| Moment Of Inertia | 5.11 lbs.-sq. ft. |
| Moment Of Inertia (j) | 5.11 lbs.-sq. ft. |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Speed | 1765 RPM |
| Mounting | F-1 , Foot Mounted |
| No Load Amps | 10.5/18.1-21A , 18.1-21/10.5A |
| No. Of Poles | 4 |
| Noise Level | 64 dBA |
| Output | 25 hp |
| Output Rating | 25 hp |
| Overload Protection | No |
| Overload Protector | Without Overload Protector |
| Painting | RAL5009 203A (ISO 12944-C2) |
| Phase | 3 |
| Power Factor 100% | 0.84 |
| Power Factor 50% | 0.7 |
| Power Factor 75% | 0.8 |
| Power Factor @ 1 % | 93.6 |
| Power Factor @ 50 % | 92.4 |
| Product Datasheet | weg-02518et3e284t-w22g.pdf |
| Regreasing System | At Drive End And Non Drive End , At Drive End And Non-Drive End |
| Rotation | CW, CCW |
| Screw Cap | Carbon Steel |
| Shaft Locking Device | Without |
| Shaft Material | Carbon Steel |
| Shaft Material Grade | Grade 1040/45 |
| Slip | 1.94% |
| Speed | 1700-1800 RPM , 1765 RPM |
| Starting Method | Direct On Line |
| Synchronous Speed | 1800 RPM |
| Temp. Rise | 80 K |
| Terminal Block | Without |
| Terminal Box | Left Position |
| Torque | 74.4 lbs.-ft. |
| Tropicalized Painting | Without |
| Voltage | 208-230/380/460V , 208-230/460/380V AC , 208-230/460V AC |
Shipping Info:
| Ship weight (kg) | 194.85 |
| Ship height (cm) | 45.2 |
| Ship length (cm) | 82 |
| Ship width (cm) | 57.2 |
| Country of Origin | BR |
Documentation:
Product Variants
| Product | Model | Frequency | Service Factor | Hp | Duty Cycle | Frame Material | No. Of Poles | Synchronous Speed | No Load Amps | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
03018ET3E286T-W22G | 60 Hz | - | 30 hp | Continuous | Cast Iron | 4 | 1800 RPM | 22.4-26/13A | €6,374.11 | |
 |
10018ET3E405T-W22G | 60 Hz | 1.25 | 100 hp | S1 | Cast Iron | 4 | 1800 RPM | 76/38A | €14,765.27 | |
|
04018ET3E324T-W22G | 60 Hz | - | 40 hp | S1 | Cast Iron | 4 | 1800 RPM | 34/17A | €7,977.95 | |
 |
01518ET3E254JM-SG | 60 Hz | 1.15 | - | S1 | Rolled Steel | 4 | 1800 RPM | 17.3/8.65A | €3,390.61 | |
 |
01518ET3E254T-SG | 60 Hz | 1.15 | - | S1 | Rolled Steel | 4 | 1800 RPM | 17.3/8.65A | €3,122.55 | |
|
02536ET3E284TS-W22G | 60 Hz | 1.25 | 25 hp | S1 | Cast Iron | 2 | 3600 RPM | 16/8A | €5,968.17 | |
 |
00152ET3E182T-SG | 60 Hz | 1.15 | - | S1 | Rolled Steel | 6 | 1200 RPM | 2.73/1.36A | €985.49 |
Explore Products
- SMC VALVES NCDQ8E400-025C Compact Cylinder
- OSG 521017112 Jobber Length Drill Bit, 11/64 Inch Size, Carbide, Wxl
- POWER FIRST 36J222 Intermediate Cable Tie 7.9 Inch Length
- DIXON MFS604 Block And Bleed Needle Valve, 10000 PSI At 200 Deg. F, Fkm O-Ring Seal
- BUSSMANN LAC-50-100SPD Cable Limiter
- GARLOCK SEALING TECHNOLOGIES e03051001525 Spiral Wound Gasket for 1 1/2 Inch ASME B16.5 Class 2500 Flange, 316L Stainless Steel Winding, Flexible Graphite
- MURRELEKTRONIK 7014-88261-2100400 Cordset, 3-pole, M8 Straight Male to M12 Right Angle Female, 4 m, PVC, M8 x 1 to M12 x 1
- STACKBIN p9636-4000 Hand Crank Workbenches, 96 Inch W, Adjustable Height, 1000 lb.
Explore More
- AVERY DENNISON
- BLANCETT
- GENERAL TOOLS & INSTRUMENTS LLC
- KEYSHAFT
- TYDENBROOKS
- Flaring And Swaging Tools
- Wash Bottles
- Heat Gun Accessories
- Concrete Rakes and Movers
- Belt Barrier and Post Accessories
- AKRO-MILS 30260 Akrobins Plastic Storage Bins
- ANSELL 11-427 Hyflex Abrasion Resistant Medium Duty Safety Gloves
- MECHANIX Carbon X Level 5 Heat Resistant Gloves
- CONDOR Coated Gloves, ANSI Cut Level A2, Palm Dipped, Polyurethane, White
- ASSOCIATED SPRING RAYMOND CU4700 Gas Springs
- CH HANSON Flagging Tapes, Standard Color
- HOFFMAN Electric Heaters
- MI-T-M Stationary Industrial Two Stage Gasoline Air Compressors, 30 Gallon
- HUBBELL - BRYANT Wallphone Plates, 1-Gang, 1-Port, Stainless Steel
- PARKER 10143 Series Male NPTF Pipe Fittings, Rigid
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WEG 02518ET3E284T-W22G 12700685 Air Handling Motor, 25 HP, 1800 RPM, 208/230/460 V, 3 Phase, TEFC, 284/6T Frame, Footed, HVAC with Internal Shaft Grounding Rings
€5,251.79 /unit