DAYTON 096026.00 Ac Gearmotor 5 Rpm Tenv 115/230v
5 RPM
83/1000 hp
Get it by Tuesday, Jul 7
5.00% off
€1,532.15 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | AC Gearmotor |
| Agma Gear Class | Class 9 |
| Amps | 1.3/0.65A |
| Application | Inverter Duty |
| Bearing Type | Needle Roller, Oversized On Output Shaft |
| Capacitor Required | Yes |
| Enclosure Type | Totally Enclosed Non Ventilated |
| Frequency | 50/60 Hz |
| Full Load Amps | 0.65/1.3A |
| Gear Case Material | Die Cast Aluminium |
| Gear Material | Precision Machined And Hardened |
| Gear Ratio | 336:1 |
| Gearmotor Shaft Type | Single |
| Housing Material | Die Cast Aluminium |
| Included Capacitor | Capacitor Included |
| Input Hp | 1/12 hp , 21/253 hp |
| Length Less Shaft | 9 3/4" |
| Lubrication | Permanent Heavy Duty Gear Oil |
| Max. Ambient Temp. | 104°F |
| Max. Torque | 310 lbs.-in. |
| Motor Enclosure | Totally Enclosed Non Ventilated |
| Motor Thermal Protection | None |
| Motor Type | Permanent Split Capacitor |
| Mounting | All Position |
| Mounting Orientation | Any Angle |
| Mounting Type | Any Position |
| Nameplate Speed | 0-15 RPM , 5 RPM |
| No. Of Output Shafts | 1 |
| Operating Voltage | 115/230V AC |
| Output Shaft Dia. | 3/4" |
| Output Shaft Length | 1 5/8" |
| Overall Height | 4.97" |
| Overall Width | 4.97" |
| Overhung Load | 565 lbs. |
| Overhung Load Capacity | 565 lbs.-ft. |
| Phase | 1 |
| Rotation | CW, CCW |
| Seal Type | Heavy Duty, Single Lip, Spring Loaded |
| Seals | Heavy Duty, Single Lip, Spring Loaded |
| Shaft Orientation | Parallel |
| Speed | 0-15 RPM |
| Thermal Protection | No |
| Type | Permanent Split Capacitor |
Shipping Info:
| Ship weight (kg) | 10.19 |
| Ship height (cm) | 27.94 |
| Ship length (cm) | 50.55 |
| Ship width (cm) | 27.43 |
| HS code | 8501402020 |
| Country of Origin | US |
Product Variants
| Model | Max. Torque | Operating Voltage | Gear Ratio | Overhung Load Capacity | Shaft Orientation | Base To Center Of Shaft | Overhung Load | Length Less Shaft | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1L518 | 30 lbs.-in. | 230V AC | 17:1 | 90 lbs.-ft. | Parallel | - | 90 lbs. | 8 1/4" | €689.80 | |
| 1L519 | 76 lbs.-in. | 230V AC | 186:1 | 90 lbs.-ft. | Parallel | - | 90 lbs. | 7 22/25" | €729.18 | |
| 1L530 | 25 lbs.-in. | 230V AC | 13:1 | 90 lbs.-ft. | Parallel | - | 90 lbs. | 8" | €703.72 | |
| 1L532 | 100 lbs.-in. | 230V AC | 1369:1 | 90 lbs.-ft. | Parallel | - | 90 lbs. | 7 22/25" | €725.63 | |
| 1LPL3 | 250 lbs.-in. | 115/230V AC | 81:1 | 250 lbs.-ft. | Parallel | 2 1/2" | 250 lbs. | 9 22/25" | €1,074.80 | |
| 1LPL4 | 400 lbs.-in. | 115/230V AC | 135:1 | 250 lbs.-ft. | Parallel | 2 1/2" | 250 lbs. | 9 22/25" | €1,066.29 | |
| 1LPL5 | 600 lbs.-in. | 115/230V AC | 267:1 | 250 lbs.-ft. | Parallel | 2 1/2" | 250 lbs. | 9 22/25" | €1,090.38 |
Explore Products
- EQUIPTO 1018D40S-GY Bulk Rack With Decking, Starter, Light-Duty, 48 Inch x 30 Inch x 96 in, Ribbed Steel
- GRAINGER ZUSAH2X46 O-Ring, 46 mm Inside Dia, 50 mm Outside Dia
- REGAL 071956MS Thread Forming Tap, #10-32 NF, H4 Limit, Plug, Bright
- NIBCO NLH700J WD-3000 Butterfly Valve, Wafer, Ductile Iron, Wafer, 5 Inch Size, 250 PSI
- GRAINGER 18F1.25X4.5-36 Carbon Steel Rectangular Bar, 1.25 Inch Thick-0.004 In, 4 1/2 Inch X 36 Inch Size
- GATES 2322V521 Belt, 0.435 Inch Thickness
- HOLO-KROME 03030 80696 Oversize Dowel Pin, 1/4 x 1/2 Size
- BUNTING BEARINGS CB162216 Sleeve Bearing, 1 Inch I.D., 1 3/8 Inch O.D., 2 Inch Length
Explore More
- KEYSHAFT
- SCBA and Breathing Air Cylinders
- Utility Waste Containers
- Boiler Drain Valves
- Motion Sensor Fixtures and Kits
- Barrier Grabs
- NEWSTRIPE Mid-Size Commercial Compactor
- HELICOIL Spiral Point Plug Taps, UNF, 3B
- MEMPHIS GLOVE Cut Pro Kevlar/Synthetic Shell Cut Resistant Work Gloves, 13 Gauge, Black
- SALISBURY Class 0 Electrical Insulating Rubber Gloves, 11 Inch, Yellow
- KIPP K0114 Tension Lever
- SALSBURY INDUSTRIES Spreader for Rural Mailbox and Townhouse Mailbox
- ZSI-FOSTER FH RPT Series, Flange Clip Side Mounts with Rod Hanger Push Install
- ANVIL Black Malleable Iron Reducers
- MORSE CUTTING TOOLS 5993 Series Ballnose End Mills
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DAYTON 096026.00 Ac Gearmotor 5 Rpm Tenv 115/230v
€1,612.79 /unit