FREE delivery on orders over €150
Product Specifications:
| Item | AC Gearmotor |
| Amps | 0.62/0.33A |
| Base To Center Of Shaft | 1.19" |
| Bearing Type | Ball On Motor, Porous Bronze Sleeve On Case |
| Capacitor Required | Yes |
| Dimensions A | 5 3/4" |
| Enclosure Type | Totally Enclosed Non Ventilated |
| Finish | Unpainted |
| Frequency | 50/60 Hz |
| Full Load Amps | 0.62/0.33A |
| Gear Case Material | Die Cast Zinc |
| Gear Material | Acetyl, Steel |
| Gear Ratio | 26:1 |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Mounting Position | All Angle |
| Gearmotor Shaft Orientation | Parallel |
| Gearmotor Shaft Type | Single |
| Gears | Acetyl, Steel |
| Housing Material | Die Cast Zinc |
| Housing Material Finish | Unpainted |
| Included Capacitor | Capacitor Included |
| Input Hp | 1/20 hp |
| Inverter Rated | No |
| Inverter Rating | 261 |
| Keyway Size Type | Flat |
| Keyway Type | Flat |
| Length Less Shaft | 5 3/4" |
| Lubrication | Grease Filled |
| Max. Ambient Temp. | 104°F , 40°C |
| Max. Torque | 30 lbs.-in. |
| Motor Enclosure | Totally Enclosed Non Ventilated |
| Motor Insulation Class | Class B |
| Motor Thermal Protection | None |
| Motor Type | Permanent Split Capacitor |
| Mounting | All Position |
| Mounting Orientation | Any Angle |
| Mounting Type | Any Position |
| Nameplate Speed | 51-75 RPM , 68 RPM |
| No. Of Output Shafts | 1 |
| Operating Voltage | 115/230V AC |
| Output Shaft Dia. | 5/16" |
| Output Shaft Height | 1.19" |
| Output Shaft Length | 3/4" |
| Overall Height | 3.94" |
| Overall Width | 5 1/4" |
| Overhung Load | 50 lbs. |
| Overhung Load Capacity | 50 lbs.-ft. |
| Phase | 1 |
| Reversible Shaft Output | No |
| Rotation | CW, CCW |
| Rpm @ 50 Hz | 58 |
| Seal Type | O-Ring Type On Output Shaft |
| Seals | O Ring Type On Output Shaft |
| Shaft | Single Output |
| Shaft Dia. | 5/16" |
| Shaft Length | 3/4" |
| Shaft Orientation | Parallel |
| Speed | 51-75 RPM |
| Speed @ 50 Hz | 58 RPM |
| Thermal Protection | No |
| Type | Permanent Split Capacitor |
Shipping Info:
| Ship weight (kg) | 3.47 |
| Ship height (cm) | 14.73 |
| Ship length (cm) | 32 |
| Ship width (cm) | 14.73 |
| HS code | 8501106020 |
| Country of Origin | US |
Product Variants
| Model | Max. Torque | Operating Voltage | Gear Ratio | Overhung Load Capacity | Shaft Orientation | Base To Center Of Shaft | Overhung Load | Length Less Shaft | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1L518 | 30 lbs.-in. | 230V AC | 17:1 | 90 lbs.-ft. | Parallel | - | 90 lbs. | 8 1/4" | €689.80 | |
| 1L519 | 76 lbs.-in. | 230V AC | 186:1 | 90 lbs.-ft. | Parallel | - | 90 lbs. | 7 22/25" | €729.18 | |
| 1L530 | 25 lbs.-in. | 230V AC | 13:1 | 90 lbs.-ft. | Parallel | - | 90 lbs. | 8" | €703.72 | |
| 1L532 | 100 lbs.-in. | 230V AC | 1369:1 | 90 lbs.-ft. | Parallel | - | 90 lbs. | 7 22/25" | €725.63 | |
| 1LPL3 | 250 lbs.-in. | 115/230V AC | 81:1 | 250 lbs.-ft. | Parallel | 2 1/2" | 250 lbs. | 9 22/25" | €1,074.80 | |
| 1LPL4 | 400 lbs.-in. | 115/230V AC | 135:1 | 250 lbs.-ft. | Parallel | 2 1/2" | 250 lbs. | 9 22/25" | €1,066.29 | |
| 1LPL5 | 600 lbs.-in. | 115/230V AC | 267:1 | 250 lbs.-ft. | Parallel | 2 1/2" | 250 lbs. | 9 22/25" | €1,090.38 |
Explore Products
- GROVE GEAR 707053L Parallel Shaft Speed Reducer
- EATON PMS2033NFBT Bottom/Top Feed Non-Fused Mill Switch, 480 VAC, 2000A, 3P
- TITAN FASTENERS CTA04224
- PENTEK 255044-75 Filter Bag, Sewn Seam, 1 Bag Size, 100 micron Rating, 55 gpm Flow Rate
- SLOAN 3850145 Sink, 3 Stations
- YANKEE 437-0.3438 Reamer Chucking Reamer 0.3438 In
- AMERICAN WELDQUIP 607GW10B Water Cooled Mig Gun, Euro, 600 Amp, 10 Feet Length
Explore More
- KEYSHAFT
- Solenoid Air Control Valves
- Anchor Screws
- Non Hazardous and Hazardous Waste Labels
- Earth Ground Resistance Tester Acc.
- Drain Cocks
- PS DOORS EdgeHalt Posi Stop Double Ladder Safety Gates
- MCR SAFETY Leather Drivers Cream Work Gloves
- ANSELL Class 00 Electrical Gloves, 11 Inch, Red
- VIBCO BV Series Pneumatic Ball Vibrators
- MILLER ELECTRIC Welding Nozzle
- 3M AB5000 Series, EMI Absorber
- WALTER TOOLS F4238 Series, Indexable Milling Cutter, Carbide Cutting Edge
- ALL GEAR Blue Craze Arborist Climbing Lines
- MERIT BRASS 4024 Pipe Nipples
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DAYTON 1LPU9 Ac Gearmotor 68 Rpm Tenv 115/230v
€726.75 /unit
