TB WOODS Spline Shafts And Couplings

TB Wood's FSH Form-Flex couplings are designed to transmit torque while compensating for angular, parallel and axial misalignments between two connected shafts. These couplings feature a flexible disc to minimise the misalignment errors and offer high torsional stiffness to maintain the structural integrity of the system. Choose from a wide range of these TB Wood's couplings, available in 6 to 12 bolt hole options on Raptor Supplies.

TB Wood's AX Series Form-Flex couplings transfer mechanical power & torque between two shafts and accommodate angular, parallel & axial misalignment. They are ideal for pumps, centrifugal & screw compressors, fans, blowers, mixers and turbo compressors, where two fully supported shafts are located very close together (1/8 to 2 inches). Choose from a wide range of AX Series Form-Flex couplings, available in bore sizes of 1.69, 1.75 and 2 inches on Raptor Supplies.

TB Wood's HSH Form-Flex couplings are designed to transmit torque while compensating for angular, parallel and axial misalignment between two connected shafts. They minimise misalignment forces on the connected equipment and are widely used in cooling fan drive applications. These couplings are available with steel and composite spacer tubing that reduces total cost by eliminating the need for bearings and support structures. The brand's HSH Series Form-Flex couplings range from 1000 rpm to 3800 rpm. A wide range of these couplings (with bore length up to 11 inches) is available on Raptor Supplies.

TB Wood's Form-Flex couplings connect two shafts and transmit torque / power effectively from one shaft to the other. They compensate for angular, parallel and axial misalignment between two connected shafts at a closer distance. These AA couplings feature a flexible disc to minimise misalignment forces and allow easy interchangeability, thereby reducing downtime & maintenance time. Choose from a wide range of these Form-Flex couplings, available in torque ratings ranging from 2363 to 17010 lb-inch on Raptor Supplies.

TB Wood's close couple Form-Flex couplings are ideal for transferring torque and power while accommodating angular, axial and parallel misalignment between two shafts. These AY Series couplings feature 300 stainless steel constructed flex discs for providing high torsional value with a maximum torque rating of 7600 lb-inch. They do not require additional lubrication for running smoothly. Choose from a wide range of Form-Flex couplings, available in a maximum bore size of 2.56 inches on Raptor Supplies.

TB Wood's GCH Form-Flex couplings are designed to connect two shafts for efficient power transmission applications in screw compressors, cooling towers or printing presses. These couplings come in a robust disc pack design for greater torque loads and lower weight per HP for a better inherent balance, as compared to rigid couplings. The high torsional stiffness feature of these couplings maintains the structural integrity of the system while counterbalancing angular or axial misalignments. They are integrated with a fail-safe mechanism that gets activated, when the element is damaged, by simply transmitting rotary motion via washers.

TB Wood's AP Series Form-Flex couplings transfer mechanical power from one shaft to another. They are ideal for pumps, centrifugal & screw compressors, fans, blowers, mixers and turbo compressors. These couplings offer wider separation between two shafts than other couplings, allowing servicing operations without moving or disconnecting the equipment. They accommodate angular, parallel and axial misalignment. Choose from a wide range of these Form-Flex couplings, available in 1.19, 1.38 and 1.63 inch bore sizes on Raptor Supplies.

TB Wood's GCF Form-Flex couplings are designed to transmit torque while compensating for angular, parallel and axial misalignments between two connected shafts. These couplings are integrated with a flexible disc to minimise the misalignment errors and feature a high torsional stiffness for maintaining the structural integrity of the system.

TB Wood’s A5 Form-Flex couplings are designed for transmiting torque while compensating for axial, angular & parallel misalignment between two connected shafts. These easy-to-install couplings protect equipment from shock, vibration & misalignment, and are widely used in cooling fan drive applications. These metal couplings have zero backlash & high torsional stiffness and are ideal for printing applications & positioning systems. The brand’s A5 Series flexible couplings are available in 0.48, 1.27, 3.49, 6.03 & 18 HP ratings at 100 rpm. Choose from a wide range of TB Wood’s flex couplings in 5, 10, 20, 25 & 35 sizes on Raptor Supplies.

TB Wood’s A5C / B5C Form-Flex couplings are spacer style couplings configured to minimise shaft separation. Two fully machined steel hubs & one flat block spacer are included in composite spacer Form-Flex couplings to eliminate the need for high maintenance center support bearings. These A5C / B5C Series couplings have a zero backlash design and offer elastomeric & gear coupling replacements without the need for lubrication. They can also be used in combination with floating shaft couplings and pillow block bearings to span long distances. Choose from a wide variety of these couplings, available in torque ratings ranging from 2200 to 34000 lb-inch on Raptor Supplies.