GROVE GEAR GR8240568.23 GR-HMQ824-40-H1-140-23 Worm Reducer, 40:1 Ratio, 0.875 Inch I.D, 1.438 Inch O.D, Cast Iron
Get it by Monday, Dec 22
€2,066.26 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Reducer |
| Assembly | HMQ-H1 |
| Bore Code | 23 |
| Center Distance | 2.38" |
| Frame | 140TC |
| Gear Type | Worm |
| Gearbox Type | Worm |
| Housing Material | Cast Iron |
| Input Bore (c Face) | 7/8" |
| Input Bore Size | 7/8" |
| Input Dia. | 7/8" |
| Input Hp @ 1750 Rpm | 1.342 hp |
| Input Keyway Size | 3/16" x 1.63" |
| Input Keyway Size (c Face) | 3/16" x 3/32" |
| Input Quill Dia. | 7/8" |
| Input Rpm | 1750 RPM |
| Input Style | C Face Quill |
| Keyway Size | 3/16" x 3/32" |
| Material | Cast Iron |
| Max Input Hp | 1 171/500 hp |
| Max. Input Hp | 1.342 hp |
| Motor Hp | 1 hp |
| Mounting Type | Shaft Mount |
| No. Of Gear Reductions | 1 |
| Nominal Motor Hp Rating To Hp @ 1750 Rpm | 1 hp |
| Output Diameter | 1.438" |
| Output Hp | 0.994 hp |
| Output Key Size | 3/8" x 3" |
| Output Rpm | 43.8 RPM |
| Output Shaft | Hollow Bore |
| Output Shaft Assembly Code | H1 |
| Output Shaft Orientation | H1 |
| Output Shaft Thrust Rating | 2091 |
| Output Shaft Type | Hollow Shaft |
| Output Style | H1 |
| Output Torque | 1433 lbs.-in. |
| Product Line | GR Series - Ironman Worm Gear Reducers |
| Reducer | Worm - Right Angle |
| Reduction Type | Single |
| Series | GR Series |
| Series Style | GR-HMQ-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Ships Factory Direct | No |
Shipping Info:
| Ship weight (kg) | 21.15 |
| Ship height (cm) | 26.67 |
| Ship length (cm) | 27.15 |
| Ship width (cm) | 23.01 |
Product Variants
| Product | Model | Gear Type | Output Shaft Type | Max. Input Hp | Overhung Load | Gear Ratio | Output Torque | Frame | Mounting Type | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
GR8240166.00 | - | Right Handed Shaft | 0.967 hp | - | 60:1 | - | - | Base | €1,119.76 | |
 |
GR8240154.00 | - | Left Handed Shaft | 0.967 hp | - | 60:1 | - | - | Base | €1,265.18 | |
 |
GR8240159.00 | - | Right Handed Shaft | - | - | - | - | - | - | €1,540.94 | |
|
GR8240565.18 | Worm | Hollow Shaft | 2.326 hp | - | - | 1421 lbs.-in. | 140TC | Shaft Mount | €2,095.34 | |
|
GR8241164.00 | - | - | - | 1315 lbs. | - | 1433 lbs.-in. | - | - | €1,422.33 | RFQ
|
 |
GR8240519.20 | Worm | Hollow Shaft | 1.653 hp | - | - | 1423 lbs.-in. | 56C | Shaft Mount | €2,095.34 | |
|
GR8240510.19 | Worm | - | - | - | - | 1418 lbs.-in. | - | Shaft Mount | €1,051.60 |
Explore Products
- APPROVED VENDOR 5LAE4 Eye Bolt, 3/8 In - 16 Thread Size, Routing, 3 In Shank Lg., 2 In Thread Lg., Plain
- GRAINGER 18481_72_0 Stainless Steel Rod 410, 1 3/4 Inch Outside Dia, 6 Ft Overall Length
- NIBCO CA02150 4501, 4501R Reducing Socket Coupling, S x S, 12 Inch Size, PVC, Dark Grey
- GATES TP420-3M-09 Dual Timing Belt, 3mm Pitch, 9mm Width
- HUBBELL WIRING DEVICE-KELLEMS HBLMRTBL
- SMC VALVES ASP530F-N03-10S Flow Controller, 3/8 Inch Size, Standard N Port
- WINSMITH E35CSFDA3230N4 Worm Gear Reducer, 180TC Input Flange, 3-Piece Coupled
- APOLLO VALVES CX04181 Handle, Size 8 Inch, Ductile Iron
Explore More
- ERICKSON
- KEYSHAFT
- RIVDOM
- KONNECT-IT
- PULLMAN-HOLT
- Hand Saws and Blades
- Captive Panel Screws
- Latches
- Tire Mounting and Demounting Tools
- Pipe Saddles
- CONDOR Cut Resistant Gloves, Polyurethane Coating, HPPE Lining
- LOUISVILLE FS2000 Series Fiberglass Step Ladders
- CONDOR Cowhide Leather Palm Gloves
- ASSOCIATED SPRING RAYMOND EPS2 24 Gas Springs
- RUD CHAIN Automatic Center Point Turnado Hoist Rings, UNC Thread, Variable Length
- VNE STAINLESS Hex Hanger with Grommets
- WIRECRAFTERS Mountings
- GATES Fuel Master Delivery 200 Fuel Hoses
- GREENLEE Stubby Square-Recess Tip Drivers
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
GROVE GEAR GR8240568.23 GR-HMQ824-40-H1-140-23 Worm Reducer, 40:1 Ratio, 0.875 Inch I.D, 1.438 Inch O.D, Cast Iron
€2,066.26 /unit