BUSSMANN LPN-RK-15SP Low Peak Fuse, 15 A, Dual, Non Indicating

Bussmann LPN-RK-15SP fuse is used in industrial and commercial settings to provide essential circuit protection. It is ideal for motor control centres and motor branch circuits. It safeguards motors and related equipment from overcurrent conditions, preventing damage and ensuring reliable operation.

Features:

• It features a time delay design for improved performance.
• This fuse has a cylindrical body style for aiding ease of installation and structural rigidity.
• It fits the rejection-type fuse block style.
• This Bussmann LPN-RK-15SP fuse has an interrupt rating of 100kA at 125VDC and 300kA at 250VAC.
• It has melamine construction for structural rigidity and high electrical insulation.

Compatible Accessories:

• Bussmann HM60030-2CR Fuse Block: This fuse block is used with the brand's LPN-RK-15SP fuse for secure installation and effective overcurrent protection, ensuring equipment safety.

Frequently Asked Questions:

Q. How do I fix a faulty Bussmann fuse?

A.

• Disconnect power to the circuit for safety.
• Take out the faulty Bussmann fuse from the holder.
• Check for signs of damage or discoloration.
• Insert a new fuse of the same type and rating.
• Ensure the fuse is seated properly in the holder.
• Restore power and test the circuit's functionality.

Q. What factors should I consider while choosing a Bussmann fuse?

A.

• Match the fuse's rating with your circuit's maximum current.
• Ensure the fuse can handle your circuit's voltage level.
• Choose the appropriate fuse type for your application.
• Select a fuse suitable for your specific equipment and industry.
• Verify if the fuse can safely interrupt the maximum fault current.

Q. How do I install Bussmann LPN-RK-15SP fuse?

A.

• Turn off the power to the circuit for safety.
• Open the fuse holder or disconnect the circuit.
• Inspect the holder contacts for any issues.
• Gently insert this LPN-RK-15SP fuse into the holder.
• Make sure the fuse fits securely in place.
• Close the fuse holder or reconnect the circuit.
• Turn on the power and test the circuit's functionality.