WEG 01036ET3H215JM-S 13312539 Pump Motor, 10 HP, 3600 RPM, 575V, 3.44 A No Load Current, TEFC, 213/5JM, Footed, Close CoupLED Pump
Get it by Tuesday, Sep 1
€2,045.00 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Close-Coupled Pump Motor |
| Altitude | 1000 M.A.S.L. |
| Ambient Temp. | -20°C to +40°C |
| Amps | 9.49A |
| Balancing Method | 1/2 Key |
| Bearing Cap | Yes |
| Bolt Material | Carbon Steel |
| Break Down Torque | 300% |
| Cable Press Material | Sem |
| Cold Locked Rotor Time | 32 sec. |
| Connection Cables Quantity | 6 |
| De Bearing Seal | V Ring |
| Degree Of Protection | IP55 |
| Design | B |
| Drain | Rubber, Automatic |
| Drip Cover | Without |
| Duty Cycle | S1 |
| Efficiency 50% | 89.5% |
| Efficiency 75% | 90.2% |
| Efficiency @ 100% | 90.2% |
| Enclosure | IC411 |
| Enclosure Rating | IC411 |
| Enclosure Type | Tefc |
| Fan Cover Material | Steel |
| Fan Material | Plastic |
| Flange | C |
| Frame | 215JM |
| Frame Material | Rolled Steel |
| Frame Size | 213/5JM |
| Frequency | 60 Hz |
| Grade | Grade 1010/20 |
| Grounding Lugs | Single |
| Grounding Lugs Type | Single |
| Impregnation Method | Dip and Bake Polyester |
| Insulation Class | Class F |
| L. R. Amps | 71.2A |
| Locked Rotor Time (cold) | 32 sec. |
| Locked Rotor Torque | 260% |
| Lrc | 7.5x(Code H) |
| Main Terminal Box Hole | 1.377" |
| Main Terminal Box Hole Size | 1.377" |
| Material | Carbon Steel |
| Moment Of Inertia (j) | 0.7188 lbs.-sq. ft. |
| Mounting | F-1 |
| Nde Bearing Seal | V Ring |
| No Load Amps | 3.44A |
| No. Of Poles | 2 |
| Noise Level | 70 dBA |
| Output Rating | 10 hp |
| Overload Protection | No |
| Overload Protector (phenolic) | Without Overload Protector |
| Painting | Only Primer |
| Phase | 3 |
| Power Factor 100% | 0.88 |
| Power Factor 50% | 0.75 |
| Power Factor 75% | 0.84 |
| Product Datasheet | weg-01036et3h215jm-s.pdf |
| Replaces | 01036EP3H215JM-S |
| Resilient Base | Without |
| Rotation | CW, CCW |
| Screw Cap | Carbon Steel |
| Service Factor | 1.15 |
| Shaft Material | Carbon Steel |
| Slip | 1.94% |
| Speed | 3400-3600 RPM , 3530 RPM |
| Starting Method | Direct On Line |
| Synchronous Speed | 3600 RPM |
| Temp. Rise | 80 K |
| Terminal Block | Without |
| Terminal Box | Left Position |
| Torque | 14.9 lbs.-ft. |
| Tropicalized Painting | Without |
Shipping Info:
| Ship weight (kg) | 80.37 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 57.91 |
| Ship width (cm) | 2.54 |
Documentation:
Product Variants
| Model | Voltage | Frame | Service Factor | Hp | Insulation Class | Frame Material | Duty Cycle | No. Of Poles | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 01536ET3E215JM-S | 230/460/190-220/380-415V AC | 215JM | 1.15 | 15 hp | Class F | Rolled Steel | S1 | 2 | €2,379.10 | |
| 01536ET3H215JM-W22 | 575V AC | 215JM | 1.25 | - | Class F | Cast Iron | S1 | 2 | €2,379.10 | |
| 00312ET3E213JM-W22 | 230/460/380V AC | 213JM | 1.25 | 3 hp | Class F | Cast Iron | S1 | 6 | €1,697.74 | |
| 00512ET3E215JM-W22 | 230/460/380V AC | 215JM | 1.25 | 5 hp | Class F | Cast Iron | S1 | 6 | €2,045.00 | |
| 01018ET3E215JM-S | 230/460/190-220/380-415V AC | 213JM | 1.15 | 10 hp | Class F | Rolled Steel | S1 | 4 | €2,084.54 | |
| 01036ET3H215JM-W22 | 575V AC | 215JM | 1.25 | - | Class F | Cast Iron | S1 | 2 | €2,045.00 | |
| 00512ET3E215JM-S | 208/230/460V AC | 215JM | 1.15 | 5 hp | Class F | Rolled Steel | S1 | 6 | €2,045.00 |
Explore Products
- BALDOR MOTOR D5075RS-1BV DC General Purpose Motor, 75HP, 1750RPM
- GORILLA MILL GMHT516R7015 30432 Carbide End Mill, 2-1/2 Inch Length, 7 Flute, Radius End
- HUB CITY 1005-30051 Take Up Frame, Welded Steel, Standard Slot-Side Mounting
- BOSTON GEAR 52833
- GRAINGER 14750_12_0 Stainless Steel Round Tube 304, 5/8 Inch Dia, 12 Inch Length
- VICKERS V10 1P5P 1C 20LH
- SMC VALVES CDA2YB63-200Z Tie Rod Cylinder
- HUBBELL WIRING DEVICE-KELLEMS IP100C Data Icon, Purple
Explore More
- BUNN
- KEYSHAFT
- OSBORN
- UEI TEST INSTRUMENTS
- ECEF
- Float Switches
- Air Impact Wrenches
- Milli/Micro Ohm Meters
- Arc Flash Clothing Kits
- PA System Accessories
- DESTACO 210 Series Vertical Hold Down Clamps
- DESTACO 375 Series Pull Action Latch Clamps, Narrow Base
- LUMAPRO U Bend Light Bulbs
- VIBCO KA Pneumatic Internal Concrete Vibrators
- ANVIL AS200S Series Channels With Long Slots
- AMERI-VENT Single Wall Flexible Vent Pipe
- APPROVED VENDOR M12 x 1.75 Partially Threaded External 12-Point Black Oxide Alloy Steel Machine Screws
- STAFFORD MFG Solution Series Clamp-On Two Piece Wrenches, Round Bore
- BISHOP-WISECARVER DualVee Series Wheels
- JOHNSON CONTROLS System 350 A350A/B Series Electronic Temperature Controls
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WEG 01036ET3H215JM-S 13312539 Pump Motor, 10 HP, 3600 RPM, 575V, 3.44 A No Load Current, TEFC, 213/5JM, Footed, Close CoupLED Pump
€2,045.00 /unit