WEG 00518ET3H184T-S 12675404 General Purpose Motor, 5 HP, 1800 RPM, 575 V, 3 Phase, TEFC, 182/4T Frame, Footed
1800 rpm
5 hp
184T
Get it by Tuesday, Aug 25
€801.76 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Altitude | 1000 M.A.S.L. , 1000 MASL |
| Ambient Temp. | -20°C to +40°C |
| Amps | 5.19A |
| Balancing Method | 1/2" Key |
| Bearing Cap | No |
| Bolt Material | Carbon Steel |
| Break Down Torque | 300% |
| Cable Press Material | Sem |
| Cold Locked Rotor Time | 28 sec. |
| Connection Cables Quantity | 6 |
| Design | B |
| Drain | Rubber, Automatic |
| Drip Cover | Without |
| Duty Cycle | S1 |
| Efficiency 50% | 60% , 88.5% |
| Efficiency 75% | 89.5% |
| Efficiency @ 1 % | 80% |
| Efficiency @ 100% | 89.5% |
| Efficiency @ 75 % | 73% |
| Enclosure | IC411 |
| Enclosure Type | Tefc |
| Fan Cover Material | Steel |
| Fan Material | Plastic |
| Flange | Without |
| Flange Type | Without |
| Frame | 182/4T |
| Frame Material | Rolled Steel |
| Frequency | 60 Hz |
| Grounding Lugs | Single |
| Hot Locked Rotor Time | 16 sec. |
| Impregnation Method | Dip And Bake Polyester |
| Insulation Class | Class F |
| L. R. Amps | 36.3A |
| Locked Rotor Time (cold) | 28 sec. |
| Locked Rotor Time(hot) | 16 sec. |
| Locked Rotor Torque | 220% |
| Lrc | 7.0X(Code J) |
| Main Terminal Box Hole | 1.118" |
| Main Terminal Box Hole Size | 1.118" |
| Moment Of Inertia | 0.308 lbs.-sq. ft. |
| Moment Of Inertia (j) | 0.308 lbs.-sq. ft. |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Speed | 1750 RPM |
| Mounting | F-1 , Foot Mounted |
| No Load Amps | 2.75A |
| No. Of Poles | 4 |
| Noise Level | 56 dBA |
| Output | 5 hp |
| Output Rating | 5 hp |
| Overload Protection | No |
| Overload Protector | Without Overload Protector |
| Painting | Munsell N 1-Matte 207N (ISO 12944-C2) |
| Phase | 3 |
| Power Factor 100% | 0.8 |
| Power Factor 50% | 0.6 |
| Power Factor 75% | 0.73 |
| Power Factor @ 1 % | 89.5 |
| Power Factor @ 50 % | 88.5 |
| Power Factor @ 75 % | 89.5 |
| Product Datasheet | weg-00518et3h184t-s.pdf |
| Resilient Base | Without |
| Rotation | CW, CCW |
| Screw Cap | Carbon Steel |
| Service Factor | 1.15 |
| Shaft Material | Carbon Steel |
| Shaft Material Grade | Grade 1040/45 |
| Slip | 2.78% |
| Speed | 1700-1800 RPM , 1750 RPM |
| Starting Method | Direct On Line |
| Synchronous Speed | 1800 RPM |
| Temp. Rise | 80 K |
| Terminal Block | Without |
| Terminal Box | Left Position |
| Torque | 15 lbs.-ft. |
| Tropicalized Painting | Without |
| Voltage | 575V , 575V AC |
Shipping Info:
| Ship weight (kg) | 35.55 |
| Ship height (cm) | 77.98 |
| Ship length (cm) | 115.06 |
| Ship width (cm) | 85.09 |
| Country of Origin | US |
Documentation:
Product Variants
| Model | Frequency | Service Factor | Hp | Motor Enclosure Design | Full Load Amps | Motor Type | Mounting Type | Frame | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 00158ET3W90L-W22 | 60 Hz | 1 | 2 hp | Totally Enclosed Fan Cooled | 2.8A | - | Rigid Base | 90L | €914.46 | |
| 00218ET3W100L-W22 | 60 Hz | 1 | 3 hp | Totally Enclosed Fan Cooled | 4.1A | - | Rigid Base | 100L | €1,095.12 | |
| 00418ET3Y112M-W22 | 60 Hz | 1 | 5 1/2 hp | Totally Enclosed Fan Cooled | 7.3A | - | Rigid Base | 112M | €1,177.86 | |
| 00518ET3Y132S-W22 | 60 Hz | 1 | 7 1/2 hp | Totally Enclosed Fan Cooled | 9.1A | - | Rigid Base | 132S | €1,613.01 | |
| 00718ET3Y132M-W22 | 60 Hz | 1 | 10 hp | Totally Enclosed Fan Cooled | 12.2A | - | Rigid Base | 132M | €1,918.09 | |
| 01818ET3Y180MFF-W22 | 50/60 Hz | 1.25 | 25 hp | Totally Enclosed Fan Cooled | 30.6A | - | Face, Base | 180M | €4,486.20 | |
| 02218ET3Y180LFF-W22 | 60 Hz | 1.25 | 30 hp | Totally Enclosed Fan Cooled | 36A | - | Face, Base | 180L | €5,926.53 |
Explore Products
- SEALMASTER SFT-205TMC 704132 Mounted Cast Iron Two Bolt Flange Ball Bearing
- WATTS W75B2Q24 0241319 Hose Connector, 3/4 Inch Nominal SIze
- NOVAFLEX 6505-24-20-CE Beverage Hose Purple 1-1/2 Inch ID 20 Feet
- SMC VALVES VQ7-6-FPG-D-1ZA02 Solenoid Valve, 4/5 Port
- WALTER TOOLS AH4033217-1/16 Solid Carbide End Mill 1/16 Inch Diameter 2 Inch Length
- VERMONT GAGE 131107110 Pin Gage Assembly, Single End, Green Cap, Class ZZ, Go, Steel, 0.5010 - 0.6255 Inch Range
- SMC VALVES MXQ12-10A-M9PSAPC Guide Cylinder, Air Slide Table
- VIKAN 29155/29365 Broom Kit, 13 Inch Size Extra stiff, Fiberglass Handle, 51.6 Inch Length, White
Explore More
- ESCHENBACH OPTIK GMBH
- KEYSHAFT
- HETTICH
- OLDE TYME
- BARMESA
- Plates and Plate Covers
- Pin Vises
- Diffusers
- Building Automation Controls
- Air Scarifier Accessories
- AKRO-MILS 30130 Shelf Bins
- OETIKER 159 Series Adjustable Clamps, Stainless Steel Band
- LEATHERHEAD TOOLS Ultra Force Irons Series, Halligan And Axes
- KEO Narrow Width Keyseat Cutters, Shank Type
- ANVIL AS679 Series U Supports
- EATON Rating Plugs
- MAG-MATE Storage Trays
- APPROVED VENDOR 1/2"-13 Grade 304 Stainless Steel Standard U-Bolts
- APPROVED VENDOR 1/4"-20 Fully Threaded Plain Grade 18-8 Stainless Steel Hex Head Cap Screws
- TUNGALOY VEE-R Solid End Mill Heads
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WEG 00518ET3H184T-S 12675404 General Purpose Motor, 5 HP, 1800 RPM, 575 V, 3 Phase, TEFC, 182/4T Frame, Footed
€801.76 /unit