DESTACO 267208 Flat Tip Bonded Neoprene Spindle, 5/8-11 Thread Size

Uses:

Destaco 267208 flat tip bonded neoprene spindle is adaptable to applications, such as welding, drilling and milling in aerospace, automotive and food & packaging industries. It is ideally used with a manual clamp for holding workpieces.

Features:

• Destaco 267208 flat tip bonded spindle is attached to clamping arm of manual clamps for holding workpieces.
• It has black coloured neoprene construction for chemical resistance, durability and preventing marring of workpiece.
• This spindle has oil resistant and silicone free properties for exceptional service life.
• It offers hardness up to 80 Shore A to prevent bending / breaking under heavy loads.
• This spindle can withstand temperatures ranging from -20 to 100 degrees C.
• It comes with jam nuts to permit clamping distance adjustments for workpieces of diverse thicknesses.
• The spindle has 5/8-11 threadings for easy installation while preventing loosening of a workpiece due to vibration / motion.
• It has a length of 5 inches and a cap width of 1.38 inches.

Compatible Accessories:

• Destaco manual clamps: These clamps are used along with Destaco 267208 flat tip bonded spindle for holding / clamping workpieces without damaging the clamped surface.
• Flanged washers: Raptor Supplies can deliver these flanged washers for fixing the spindles at a fixed position.
• Replacement caps / tips: These replacement tips or caps are used to replace worn out or damaged neoprene tips of the spindle assembly.

Standards and Approvals:

• Destaco 267208 flat tip bonded spindle is ISO 9001:2015 and ISO 14001:2015 certified.

Installation:

• Destaco 267208 flat tip bonded spindle has a threaded body for easy and secure installation on the clamping bar of a manual clamp.

Frequently Asked Questions:

Q. Are other variants of Destaco 267208 spindle available on Raptor Supplies?

A. Yes, Raptor Supplies also offers Destaco metric threaded neoprene spindles, swivel foot spindles, round bonded spindles and hex head spindles.

Q. What is the difference between flat tip bonded spindles and swivel foot spindles?

A. The flat tip bonded spindles are used to reduce marking on fragile or polished surfaces while swivel foot spindles are used where a workpiece with a large area needs to be clamped.

Q. How is clamping force different from the holding force / capacity?

A. The term "holding force or capacity" indicates the ideal strength of the clamp for holding down the equipment, workpieces or sheet metal on the assembly line or during other industrial applications. The holding force is measured during the clamp manufacturing process, so does not provide a practical measure of the capacity of the clamp. Clamping force or exerting force denotes the actual force exerted by the clamp onto the workpieces for holding them. The clamping force is generally lesser than the holding capacity, due to several factors, such as the position of spindle in the clamping bar and the opposing force applied on the clamp.

Q. Which grease is recommended for use with Destaco clamps?

A. A coupling grease, such as Mobil XTC is recommended for use with the brand's mechanical clamps.

Q. Are Destaco clamps rust resistant?

A. All Destaco carbon steel clamps are zinc plated to withstand & minimise wear & tear due to harsh industrial environments. Destaco also supplies stainless steel clamps for applications requiring clamping in outdoor conditions.

Q. Are Destaco clamps used for hoisting or lifting applications?

A. No, Destaco clamps are load-rated only for clamping applications. They are not designed for hoisting or lifting applications.