DESTACO 201208 Flat Tip Bonded Neoprene Spindle, Silicon Free, 10-32 Thread

Uses:

Destaco 201208 flat tip bonded neoprene spindle is suitable for applications, such as welding, drilling and milling operations in aerospace, automotive and food & packaging industries. It is ideally used with manual clamps for holding workpieces.

Features:

• Destaco 201208 flat tip bonded spindle is attached to clamping arm of manual clamps for holding workpieces.
• It is equipped with a neoprene tip that has oil resistant & silicone free properties for exceptional service life & durability.
• The neoprene constructed tip prevents marring of workpiece surface.
• It has a hardness of 70 - 80 Shore A and can tolerate temperatures ranging from -20 to 100 degrees C.
• This spindle has 10-32 threadings for easy installation and vibration resistance.
• It is supplied with jam nuts to permit clamping distance adjustments according to the size and thickness of the workpiece.
• The spindle has a length of 1.38 inches and a cap width of 0.56 inches.

Compatible Accessories:

• Destaco manual clamps: These clamps are suitable for use with Destaco 201208 flat tip bonded spindle for holding / clamping workpieces without damaging the clamped surface.
• Flanged washers: Raptor Supplies can deliver these flanged washers for fixing the spindles at a fixed position.
• Replacement caps / tips: These replacement tips or caps are used to replace worn out or damaged neoprene tips of the spindle assembly.

Standards and Approvals:

• Destaco 201208 toggle clamp spindle assembly is manufactured in compliance with ISO 14001:2015 & ISO 9001:2015 standards for ensuring environmental health, user safety and efficient performance of the clamp.

Installation:

• Destaco 201208 flat tip bonded spindle has a threaded body for secure attachment to the clamping bar of a manual clamp.

Frequently Asked Questions:

Q. Are other variants of Destaco 201208 spindle available on Raptor Supplies?

A. Yes, Raptor Supplies also offers Destaco metric threaded neoprene spindles, swivel foot spindles, round bonded spindles and hex head spindles.

Q. What is the difference between flat tip bonded spindles and swivel foot spindles?

A. The flat tip bonded spindles are used to reduce marking on fragile or polished surfaces while swivel foot spindles are used where a workpiece with a large area needs to be clamped.

Q. How is clamping force different from the holding force / capacity?

A. The term "holding force or capacity" indicates the ideal strength of the clamp for holding down the equipment, workpieces or sheet metal on the assembly line or during other industrial applications. The holding force is measured during the clamp manufacturing process, so does not provide a practical measure of the capacity of the clamp. Clamping force or exerting force denotes the actual force exerted by the clamp on the workpieces for holding them. The clamping force is generally lesser than the holding capacity, due to several factors, such as the position of the spindle in the clamping bar and the opposing force applied on the clamp.

Q. Which grease is recommended for use with Destaco clamps?

A. A coupling grease, such as Mobil XTC is recommended for use with the brand's mechanical clamps.

Q. Are Destaco clamps used for hoisting or lifting applications?

A. No, Destaco clamps are load-rated only for clamping applications. They are not designed for hoisting or lifting applications.