BALDOR MOTOR VNEDM3554 Three Phase Enclosed Motor, 230/460V, 1800 RPM, 60 Hz, 1.5 hp, TENV, 56C Frame
2.1A
1800 RPM
1.5 hp
Get it by Thursday, Dec 18
€1,693.16 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Voltage | 2.1A @ 460V, 4.2A @ 230V |
| Amps @ Volts | 4.2A @ 230V, 2.1A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 19.9 lbs.-ft. |
| Conduit Box Material | Steel |
| Conduit Box Position | F1 |
| Constant Torque Speed Range | 6 |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 86.5% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TENV |
| Feedback Device | NO FEEDBACK |
| Frame | 56C |
| Frame Material | Steel |
| Frame Size | 56C |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 4.2A @ 230V, 2.1A @ 460V |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 2.1A |
| Hp | 1 1/2 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max. Rpm | 2700 RPM |
| Motor Enclosure Design | Totally Enclosed Non Ventilated |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 18 AWG |
| Motor Lead Termination | Ring Terminals |
| Motor Type | 3534M |
| Mounting Type | Not Applicable |
| Nameplate Rpm | 1755 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 1 1/2 hp @ 60 Hz |
| Overall Length | 12.93" |
| Phase | 3 |
| Power Factor | 76 |
| Product Datasheet | baldor-motor-vnedm3554.pdf |
| Product Family | Dirty Duty Plus |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | C Face |
| Pulley Shaft Indicator | Standard |
| Rpm | 1755 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 21.6 |
| Ship height (cm) | 33.33 |
| Ship length (cm) | 49.21 |
| Ship width (cm) | 34.93 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - VWAM3554
- Constant Torque Speed Range: 6
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 86.50%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: K
- Lifting Lugs: No Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 18 AWG
- No-Load Current: 0 A
- Product Family: DIRTY DUTY PLUS
- Pull-Up Torque: 10.98 LB-FT
- Pulley End Bearing Type: Sealed Bearing
- Pulley Face Code: C-Face
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 0.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 19.8 A
- Temp. Rise @ Rated Load: 88 deg C
- Temp. Rise @ S.F. Load: 104 deg C
Documentation:
Product Variants
| Product | Model | Voltage | Hp | Mounting Type | Service Factor | Nameplate Rpm | Motor Type | Insulation Class | Frame Material | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
KENM3454 | 230/460V | 1/4 hp | C Face, Footless | 1.15 | 1750 RPM | Three Phase | Class F | Steel | €799.91 | |
|
KENM3534 | 230/460V | 1/3 hp | C Face, Footless | 1.15 | 1750 RPM | Three Phase | Class F | Steel | €882.26 | |
|
KENM3535 | 230/460V | 1/3 hp | C Face, Footless | 1.15 | 1150 RPM | Three Phase | Class F | Steel | €1,296.89 | |
 |
KM3454 | 230/460V | 1/4 hp | C Face, Footless | 1.35 | 1735 RPM | Three Phase | Class B | Steel | €740.94 | |
 |
KM3457 | 230/460V | 1/3 hp | C Face, Footless | 1.35 | 3450 RPM | Three Phase | Class B | Steel | €756.78 | |
|
KNM3454 | 208-230/460V | 1/4 hp | C Face, Footless | 1 | 1725 RPM | Three Phase | Class F | Steel | €542.42 | |
|
KNM3534 | 208-230/460V | 1/3 hp | C Face, Footless | 1 | 1725 RPM | Three Phase | Class B | Steel | €600.17 |
Explore Products
- TITAN FASTENERS AHM10855X5X3
- WALTER SURFACE TECHNOLOGIES 14A918A
- RIDGID 37393 Washer, Flat
- LYNDEX-NIKKEN E16-026(C) Collet, Round Face, 13/32 Inch Size
- HUBBELL-WIEGMANN RSC081004GNK Enclosure Hinged 4d x 10w x 8h Inch
- GRAINGER BULK-PS-PE-958 Plastic Sheet Stock, 0.75 Inch Thick, 3 Inch Width x 24 Inch Length, Black
- APPROVED VENDOR MPPD030030-100P1 Machine Screw, M3x0.5 Thread Size, Steel, 3 mm Lg., Std, Pan
Explore More
- KEYSHAFT
- EGO POWER PLUS
- RHINO TOOL
- NAUTILAIR
- SAFEGUARD
- Rules and Straight Edges
- Heat Shrink Roller Covers
- Bench Grinder Accessories
- Towing Chains and Cables
- Automotive Appearance
- DESTACO Swivel Foot Spindle
- ELVEX Ultra lightweight Core Protective Eyewears
- CHICAGO PNEUMATIC CP5080 Series Belt Sanders
- MUELLER INDUSTRIES 103MDT Silent Check Valves
- VULCAN HART Burner Panel
- HANSEN Quick Coupler Plugs
- SURE FRAME 40 Series Standard T-slotted Rails
- KLEIN TOOLS 1604 Series Haven’s Grips
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR VNEDM3554 Three Phase Enclosed Motor, 230/460V, 1800 RPM, 60 Hz, 1.5 hp, TENV, 56C Frame
€1,693.16 /unit