BALDOR MOTOR KENM3454 Three Phase Enclosed Motor, 230/460V, 1800 RPM, 60 Hz, 0.25 hp, TENV, 56C Frame
Get it by Tuesday, Dec 23
€799.91 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Ac/dc | AC |
| Ambient Temp. | 40°C |
| Amps | 0.8/0.4A |
| Base Type | Not Applicable |
| Break-down Torque | 3.17 lbs.-ft. |
| Class | Stock |
| Code | M |
| Conduit Box Material | Steel |
| Conduit Box Position | F1 |
| Design Code | B |
| Duty | Continuous |
| Enclosure Design | TENV |
| Frame | 56C |
| Frame Material | Steel |
| Frame Size | 56C |
| Frequency | 60 Hz |
| Full Load Amps | 0.8/0.4A |
| Full Load Torque | 0.75 lbs.-ft. |
| Full Load Torque | 0.75 ft.-lbs. |
| Hp | 1/4 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Duty |
| Lead | 9#18 |
| Line-line Res. @ 25° C | 75.452 ohms A Ph/0 ohms B Ph |
| Locked-rotor Torque | 2.03 lbs.-ft. |
| Motor Enclosure Design | Totally Enclosed Non Ventilated |
| Motor Type | Three Phase |
| Mounting Type | C Face, Footless |
| Multiplier | K |
| Nameplate Rpm | 1750 RPM |
| Nema/iec | NEMA |
| No Load Amps | 0.298A |
| No. Of Motor Leads | 9 |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Nominal Efficiency | 80% |
| Overall Length | 11.06" |
| Phase | 3 |
| Power Factor | 42 |
| Product Datasheet | baldor-motor-kenm3454.pdf |
| Proprietary | No |
| Pull-up Torque | 1.77 lbs.-ft. |
| Pulley Face Code | C Face |
| Revision | C |
| Rpm | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 5/8" |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Start Configuration | DOL |
| Starting Amps | 3.18A |
| Synchronous Rpm | 1800 RPM |
| Temp. Rise @ Rated Load | 28°C |
| Temp. Rise @ S. F. Load | 32°C |
| Type | 3513M |
| Voltage | 230/460V |
| Wire Size | 18 AWG |
Shipping Info:
| Ship weight (kg) | 11.7 |
| Ship height (cm) | 28.26 |
| Ship length (cm) | 41.91 |
| Ship width (cm) | 29.21 |
| HS code | 85013100 |
| Country of Origin | US |
Product Details:
- Explosion Proof Class/Group: NONE
- Locked-Rotor Torque: 2.03 LB-FT
- Nameplate No.: NP2116L
- Pull-Up Torque: 1.77 LB-FT
- Starting Current: 3.18 Amps
Documentation:
Product Variants
| Product | Model | Voltage | Hp | Mounting Type | Service Factor | Nameplate Rpm | Motor Type | Insulation Class | Frame Material | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
KENM3534 | 230/460V | 1/3 hp | C Face, Footless | 1.15 | 1750 RPM | Three Phase | Class F | Steel | €882.26 | |
![]() |
KENM3535 | 230/460V | 1/3 hp | C Face, Footless | 1.15 | 1150 RPM | Three Phase | Class F | Steel | €1,296.89 | |
![]() |
KM3454 | 230/460V | 1/4 hp | C Face, Footless | 1.35 | 1735 RPM | Three Phase | Class B | Steel | €740.94 | |
![]() |
KM3457 | 230/460V | 1/3 hp | C Face, Footless | 1.35 | 3450 RPM | Three Phase | Class B | Steel | €756.78 | |
![]() |
KNM3454 | 208-230/460V | 1/4 hp | C Face, Footless | 1 | 1725 RPM | Three Phase | Class F | Steel | €542.42 | |
![]() |
KNM3534 | 208-230/460V | 1/3 hp | C Face, Footless | 1 | 1725 RPM | Three Phase | Class B | Steel | €600.17 | |
![]() |
VEM2333T | 208-230/460V | 15 hp | C Face, Footless | 1.15 | 1765 RPM | 0944M | Class F | Iron | €4,503.11 |
Explore Products
- GROVE GEAR W5202531.00 DHMQ520-676-H1-56-16 Quill Input Hollow Bore Output Worm Gear Reducer
- TENNSCO 3685TO Open Upright, 36 Inch Depth, 85 Inch Height
- FABORY U01209.025.0225 Tap Bolt, 1/4 In - 20 Thread Size, Steel, 2 1/4 In Lg., 11/64 In Head Ht., 7/16 In Head Wd., 60000 psi TS
- APPLETON ELECTRIC EDP58 Circuit Breaker Panelboard
- RHEEM RTG20164B Gas Valve, LP
- TANIS BRUSHES MB400648 Strip Brush 3/16w 48 Inch Length Trim 3 Inch
- PARKER PFG-60-SI
Explore More
- KEYSHAFT
- MAXXIMA
- SMC VALVES
- TENNANT
- TIMBER TUFF
- Direct Connect Filter Cartridges
- Keyway Broach Sets
- Welding Accessories
- Gage Blocks/Clamps Surveillance Masters
- Flashlight Replacement Bulbs
- ANSELL 08-354 Alphatec Neoprene Chemical Resistant Gloves
- CONDOR High-Visibility Vest, ANSI Class 3, Mesh Polyester, Hook And Loop, Lime
- MILLER BY HONEYWELL GlideLoc Vertical Height Access Ladder System Kits, Aluminum
- DESTACO 2007 Series Vertical Hold Down Clamps, Solid Bar
- VIBCO VS Series Silent Pneumatic Turbine Vibrators
- BANJO FITTINGS Street Elbow, 90 Degrees
- LITTLE GIANT PUMPS Cast Iron Centrifugal Pumps
- WALTER TOOLS F2162 Reaming Tool
- INSIZE Long Handle Telescoping Gage
- WRIGHT TOOL Full Polish Open End Wrenches
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR KENM3454 Three Phase Enclosed Motor, 230/460V, 1800 RPM, 60 Hz, 0.25 hp, TENV, 56C Frame
€799.91 /unit



