BALDOR MOTOR VEM4106T Three Phase Enclosed Motor, 230/460V, 3600 RPM, 20 hp, 60 Hz, TEFC, 256TC Frame
23A
3600 RPM
20 hp
Get it by Tuesday, Dec 23
€5,220.66 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Volts | 50A @ 208V, 46A @ 230V, 23A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 111 lbs.-ft. |
| Conduit Box Material | Cast Iron |
| Conduit Box Position | F1 |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 91% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 256TC |
| Frame Material | Iron |
| Frame Size | 256TC |
| Frequency | 60.00 Hz |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 50A @ 208V, 46A @ 230V, 23A @ 460V |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 23A |
| Hp | 20 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | H |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 12 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Type | 0936M |
| Mounting Type | C Face, Footless |
| Nameplate Rpm | 3520 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 2 |
| No. Of Speeds | 1 |
| Output @ Frequency | 20 hp @ 60 Hz |
| Overall Length | 23.86" |
| Phase | 3 |
| Power Factor | 89 |
| Product Datasheet | baldor-motor-vem4106t.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C Face |
| Pulley Shaft Indicator | Standard |
| Rpm | 3520 RPM |
| Rpm Range | 3400-3600 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 3600 RPM |
| Synchronous Rpm @ Frequency | 3600 RPM @ 60 Hz |
| Synchronous Speed | 3600 RPM |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 208-230/460V |
| Voltage @ Frequency | 208V @ 60 Hz, 230V @ 60 Hz, 460V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 103.05 |
| Ship height (cm) | 49.85 |
| Ship length (cm) | 78.74 |
| Ship width (cm) | 60.33 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - VM4106T
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 91.00%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: H
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 12 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 39.1 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: C-Face
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 1.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Starting Current: 161 A
- Temp. Rise @ Rated Load: 76 deg C
- Temp. Rise @ S.F. Load: 95 deg C
Documentation:
Product Variants
| Product | Model | Voltage | Hp | Mounting Type | Service Factor | Nameplate Rpm | Motor Type | Insulation Class | Frame Material | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
KENM3454 | 230/460V | 1/4 hp | C Face, Footless | 1.15 | 1750 RPM | Three Phase | Class F | Steel | €799.91 | |
|
KENM3534 | 230/460V | 1/3 hp | C Face, Footless | 1.15 | 1750 RPM | Three Phase | Class F | Steel | €882.26 | |
|
KENM3535 | 230/460V | 1/3 hp | C Face, Footless | 1.15 | 1150 RPM | Three Phase | Class F | Steel | €1,296.89 | |
 |
KM3454 | 230/460V | 1/4 hp | C Face, Footless | 1.35 | 1735 RPM | Three Phase | Class B | Steel | €740.94 | |
 |
KM3457 | 230/460V | 1/3 hp | C Face, Footless | 1.35 | 3450 RPM | Three Phase | Class B | Steel | €756.78 | |
|
KNM3454 | 208-230/460V | 1/4 hp | C Face, Footless | 1 | 1725 RPM | Three Phase | Class F | Steel | €542.42 | |
|
KNM3534 | 208-230/460V | 1/3 hp | C Face, Footless | 1 | 1725 RPM | Three Phase | Class B | Steel | €600.17 |
Explore Products
- HUBBELL WIRING DEVICE-KELLEMS 2416007 Service Drop Support Grips, Light Duty, Single Eye, Single Weave, Closed Mesh, Stainless Steel, 0.58-0.68 Inch
- SMC VALVES AS4201F-N03-13S Flow Controller, 1/2 Inch Size, Standard N Port
- BALDOR / DODGE 30A25H18SB TIGEAR-2 Reducer With Sealed Input Bearing
- GATES 12ACC-PSIIX50FT
- ZOELLER 3618 Cord Term and Seal, 230V, 20 Inch, 1Ph
- RIDGID 33627 Screw, 3/8 X 1-1/4 Shoulder
- PROCON 102E025R11XX Rotary Vane Pump, Brass, 25 GPH, Fluorocarbon, No Relief Valve
- DESTACO 102911 Flanged Washer, Stainless Steel, 5/8 Inch Length
Explore More
- GOLIGHT
- KEYSHAFT
- SJE-RHOMBUS
- SILVERTHIN BEARING
- ENDRESS HAUSER
- DC Speed Controls
- Keyless Bushings
- Forged Eye Nuts
- Soldering Flux
- Receptacle and GFCI Tester Accessories
- DWYER INSTRUMENTS GBT Series Glow-in-the-Dark Bimetal Thermometers
- DUPONT Collared Disposable Coveralls
- ANSELL 11-421 Hyflex Abrasion Resistant Light Duty Gloves
- CONDOR Standard Deerskin Leather Work Gloves
- RUBBERMAID Trade Cart / Service Bench
- SERVUS Dielectric Overshoes
- MILWAUKEE Scaling Chisel
- DURHAM MANUFACTURING Bases, Gray
- WEG LRW-Series Line And Load Reactors
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR VEM4106T Three Phase Enclosed Motor, 230/460V, 3600 RPM, 20 hp, 60 Hz, TEFC, 256TC Frame
€5,220.66 /unit