FREE delivery on orders over €150
IMPELLER 228BR2505-1211 Electronic Flowmeter, 2 1/2 Inch For Pipe Size, 2 1/2 Inch Connection Size, Fnpt
Item: CR4MUBModel: 228BR2505-1211Cross Ref: 49DF18
7 In Stock
Ships within 2 days via
10.00% off
€1,628.89 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Electronic Flowmeter |
| Accuracy | -1% to +1% |
| Cable Length | 20 ft. |
| Compatible Flow Material | Water |
| Connection Size | 2 1/2" |
| Connection Type | NPT |
| Display Type | Not Applicable |
| Flow Range | 7.65-459 GPM |
| Flow Rate | 7.65-459 GPM |
| Flow Rate - Maximum | 459 GPM |
| Flow Rate - Minimum | 7.65 GPM |
| Flow Rate Range | 7.65-459 GPM |
| Flowmeter Type | Paddlewheel |
| Fluid Connection | 2 1/2" NPT |
| Fluid Temp. | 0°F to +221°F |
| For Pipe Size | 2 1/2" |
| Frequency (minimum) | 3.2 Hz |
| Frequency - Maximum | 200 Hz |
| Housing Material | PPS |
| Includes Flow Rate Adjustment Knob | No |
| Includes Pressure Gauge | No |
| Includes Totalizer | No |
| Max. Media Temperature | 221°F |
| Max. Operating Pressure | 400 psi |
| Max. Pressure | 200 psi |
| Max. Voltage | 35V DC |
| Media Temp. Range | 0°F to 221°F |
| Min. Media Temperature | 0°F |
| Mounting Location | Insertion |
| Mounting Orientation | Horizontal |
| O-ring Material | EPDM |
| Output Type | Standard Frequency Pulse |
| Overall Height | 8 2/5" |
| Overall Length | 4 1/2" |
| Product Type | Metallic Tee Type Flow Sensor |
| Pulse Rate | Not Applicable |
| Rotor Material | Nylon |
| Seal Material | EPDM |
| Sensor Type | Paddle Wheel |
| Shaft Material | Tungsten Carbide |
| Type | Impeller |
| Unit Of Measure | Gallons |
| Viscosity - Maximum | 32.6 SUS |
| Wetted Material | Brass, EPDM, Nylon, Tungsten Carbide, UHMWPE |
Shipping Info:
| Ship weight (kg) | 4.05 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Explore Products
- WATTS 957ZRPDA-DOSY-CFM 8 0113105 Reduced Pressure Detector Assembly, Grooved Joint, 8 Inch Size, Stainless Steel
- MORSE CUTTING TOOLS 92068 Taper Drill Bit, 11.2mm Size
- EATON CAH2175 Circuit Breaker Feed-thru 175 Amp 240vac 2p 22kaic@240v
- SQUARE D MGA36800 Circuit Breaker, I-line Style Plug-In, 800A, 600VAC, 3 Pole
- MERIT BRASS 01416-40 Pipe Cap, 2-1/2 in, Butt Weld, SCH 10, 304/304L Stainless Steel, Import
- SCHNEIDER ELECTRIC ZB6EG3B Protected Led, Green, 40 to 132VAC, LED, 48 to 120VAC
- SPEARS VALVES 2012-020C Gate Valve, Socket, Buna, 2 Size, CPVC
- DAYTON 2MEF7 Motor Dual Run Capacitor, Round, 370VAC, 50/7.5, 5 1/4 Inch Overall Height
Explore More
- FALLTECH
- KEYSHAFT
- STRUCTURAL PLASTICS
- CY TOOL & PLASTICS
- HARRINGTON AWG
- Single Pressure Controls
- Painting and Finishing Tools
- Bulkhead Tank Fittings
- Threaded Shank Drill Bits
- Upright Sump Pumps
- ALLPAX GASKET CUTTER SYSTEMS Arch Punches
- CONDOR Full Finger General Purpose Gloves
- PYRAMEX Venture 3 Half Frame Eyewears
- ZURN Elbow, 90 Degrees
- SQUARE D Circuit Breaker Mechanical Lug Kit s
- KLEIN TOOLS Cabinet-Tip Screwdrivers, Heavy-Duty Round-Shanks
- 3M Scotchlok Nylon Insulated with Insulation Grip Block Forks
- DEHN Plastic Cases
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
IMPELLER 228BR2505-1211 Electronic Flowmeter, 2 1/2 Inch For Pipe Size, 2 1/2 Inch Connection Size, Fnpt
€1,809.88 /unit