FREE delivery on orders over €150
HELICOIL 4184-4CNW040S Locking Insert, M4x0.7 Thread Size, SS, 4 mm Insert Lg.
Item: CH3XDGModel: 4184-4CNW040SCross Ref: 4EXT5
7 In Stock
Ships within 2 days via
10.00% off
€1,777.59 /pkg. of 1000
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Locking Insert |
| Display Qty | 1000 |
| Drill Bit Size | 4.25 mm |
| Drill Size | #19 |
| Features | Positive Self Locking Torque |
| Feed | Strip Feed |
| Finish | Dry Film Lubricant |
| Free Coil Dia. | 5.325 mm |
| Free Coil Diameter | 5.588 mm |
| Grade | 304 |
| Hardness | Rockwell C43-C50 |
| Helical Insert Type | Screw Locking |
| Insert Length | 4 mm |
| Material | Stainless Steel |
| Material Grade/class | 18-8 |
| Material Quality Standards | As7245 |
| Maximum Hole Diameter | 4.2418 mm |
| Overall Length | 4 mm |
| Rockwell Hardness | C43-C50 |
| Series | HELI-COIL |
| Sti Tap Size | M4 x 0.7 |
| System Of Measurement | Metric |
| Tang Style | Tanged |
| Tensile Strength | 200000 psi to 250000 psi |
| Thread Direction | Right Hand |
| Thread Size | M4 x 0.7 |
| Thread Type | Coarse |
Shipping Info:
| Ship weight (kg) | 0.36 |
| Ship height (cm) | 1.52 |
| Ship length (cm) | 2.03 |
| Ship width (cm) | 2.03 |
| Country of Origin | US |
Explore Products
- BALDOR / DODGE 056565 P2B-SCEZ-108-SH EZ Kleen Bearing, Shaft Size 1.50 Inch, Bore Round, Ni-Co Steel
- REGAL 027269AS43 Extension Spiral Point Tap, M10 x 1.5 Size, D6 Limit, 3 Flutes .381 Shank With Steam Oxide
- TSUBAKI 35A112 SPKT
- DIXON DCP2021 Air Chief Industrial Female Threaded Plug, Steel, 300 PSI Pressure Rating
- PROTEKTIVE PAK 210310 Tape, Floor Marking, English, 50 x 66m
- SPILFYTER 4500K2 Universal Spill Kaddie Kit 22 Gallon With Wheels
- NORTON ABRASIVES 66252839057 End Brush, 3/4 Inch Dia., 1/4 Inch Abrasive Shank Size, 0.02 Inch Wire Dia.
Explore More
- DYNAQUIP CONTROLS
- KEYSHAFT
- SNOWEX
- SE-KURE
- SURE STEP
- Keyless Bushings
- Angle Pitch and Slope Locators
- Earth Ground Resistance Tester Acc.
- Utility Brushes
- Oils
- ALLPAX GASKET CUTTER SYSTEMS Bottom Shaft Rebuild Kits
- DWYER INSTRUMENTS 477B Series Handheld Digital Manometers
- SALISBURY Class 00 Electrical Insulating Rubber Gloves, 14 Inch, Red
- CONDOR Coated Gloves, Smooth, Nitrile, Palm Dipped, 13 Gauge Thick
- ROCKWOOD Push Bar
- MAIN FILTER INC. Spin-On Filters, Glass, 40 Micron, Buna Seal
- GROTE Work Lights
- FLOWLINE DLX4 Series Echopod Ultrasonic Liquid Level Sensors
- CARRIER Controllers
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
HELICOIL 4184-4CNW040S Locking Insert, M4x0.7 Thread Size, SS, 4 mm Insert Lg.
€1,975.10 /pack