FREE delivery on orders over €150
Product Specifications:
| Item | Shaft Oil Seal |
| Case Coating | None |
| Contact Type | Contact Seal |
| For Fluid Type | Alcohol, Automatic Transmission Fluid, Cutting Oil, E.P. Lubricants, Engine Oil, Gasoline, Gear Oil, Grease, Hydrochloric Acid Solution, Light Oil/Kerosene, Machine Oil No.2, Petroleum Base Lubricating Oil, Sulfuric Acid Solution, Turbine Oil No.2, Water-Glycol |
| Hardness | 45 HRC @ 4 M/S And 55 HRC @ 10 M/S |
| Inside Dia. | 1.437" |
| Lip Material | Nitrile Rubber |
| Max. Pressure | 7 psi |
| Max. Temp. | 250°F |
| Min. Temp. | -40°F |
| No. Of Lips | 1 |
| Outside Dia. | 2 1/8" |
| Overall Width | 3/8" |
| Seal Design | SC |
| Seal Type | Single Lip Seal |
| Spring Reinforcement | Yes |
| Spring Type | Garter |
Shipping Info:
| Ship weight (kg) | 0.45 |
| Ship height (cm) | 0.95 |
| Ship length (cm) | 5.4 |
| Ship width (cm) | 5.4 |
Product Variants
| Model | Inside Dia. | Overall Width | Outside Dia. | Lip Material | Seal Type | Seal Design | Max. Pressure | No. Of Lips | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 10012010SC | 100 mm | 10 mm | 120 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €62.30 | |
| 10012012SC | 100 mm | 12 mm | 120 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €61.14 | |
| 10012013SC | 100 mm | 13 mm | 120 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €62.70 | |
| 10012510SC | 100 mm | 10 mm | 125 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €62.14 | |
| 10012512SC | 100 mm | 12 mm | 125 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €39.16 | |
| 10012513SC | 100 mm | 13 mm | 125 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €37.46 | |
| 10012515SC | 100 mm | 15 mm | 125 mm | Nitrile Rubber | Single Lip Seal | SC | 7 psi | 1 | €37.46 |
Explore Products
- GRAINGER PS-NYLB-166 Rectangle Stock, 1 Inch Plastic Thick, 4 Inch Width X 24 Inch Length, Black, Opaque
- GRAINGER 18f1.75x8-24 Carbon Steel Plate, 1.75 Inch Thick, 8 Inch X 24 Inch Nominal Size
- SHARP SW-120NC Band Saw, 13 3/8 Inch x 12 in, 66 to 328, 0 Deg, 17.0 A, 3 Phase, 220VAC
- GRAINGER 4428_12_0 Stainless Steel Flat Bar, 304, 0.375 Inch Thick, 5 Inch X 12 Inch Size, Hot Rolled, Mill
- MILWAUKEE VALVE HL234V A S Butterfly Valve, Lug Type, Lever Handle, Ductile Iron, 6 Inch Valve Size
- USA SEALING BULK-PS-PC-383 Sheet Stock, Poycarbonate, 60 x 48 x 0.250 Inch Size, 240F
- RIDGID 35835 E-5116 Pipe Tap Taper 3/4-14 Black Oxide 4 flute
- APPLETON ELECTRIC UCB9P Contact Block
Explore More
- HASTINGS FILTERS
- INSINKERATOR
- KEYSHAFT
- ELASCO PRODUCTS
- SAFEGUARD
- Hang and Stack Bins
- Bench Cans
- Mounted Linear Bearings
- Spacer and Standoff Assortments
- Electric Baseboard Heaters
- ASHCROFT 1188 Low Pressure Bellow Gauges, Brass
- TEMPCO Mi-Plus Band Heaters
- GLOBE SCIENTIFIC Label/Dot Combo Rolls, Cryo, Direct Thermal
- HEDLAND Flow Meters For Air And Other Compressed Gases
- SPEARS VALVES CLIC Economical IPS Pipe Hangers
- REGAL Super Tuf-V Cobalt End Mills, Single End, HSS, CC, 4 Flutes, TiALN
- GRAINGER Reducing Wyes
- KLEIN TOOLS Iron Conduit Benders
- SIOUX CHIEF Reducer Hex Nipples
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DDS IN36.5153.979.52SC Rotary Shaft Oil Seal, Sc, Nitrile, 1.437 Inch ID, 2.125 Inch Od, 0.375 Inch Width
€34.98 /unit

