BALDOR MOTOR VNDM3538 Dirty Duty Plus Motor, 230/460V, 1800 RPM, 60 Hz, 0.5 hp, 3 Phase, TENV, 56C Frame
Get it by Tuesday, Dec 23
€1,006.76 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Voltage | 0.8A @ 460V, 1.6A @ 230V |
| Amps @ Volts | 1.6A @ 230V, 0.8A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 6.71 lbs.-ft. |
| Conduit Box Material | Steel |
| Conduit Box Position | F1 |
| Constant Torque Speed Range | 6 |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 80% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TENV |
| Feedback Device | NO FEEDBACK |
| Frame | 56C |
| Frame Material | Steel |
| Frame Size | 56C |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 1.6A @ 230V, 0.8A @ 460V |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 0.8A |
| Hp | 1/2 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | M |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max. Rpm | 2700 RPM |
| Motor Enclosure Design | Totally Enclosed Non Ventilated |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 18 AWG |
| Motor Lead Termination | Ring Terminals |
| Motor Type | 3512M |
| Mounting Type | Not Applicable |
| Nameplate Rpm | 1740 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 1/2 hp @ 60 Hz |
| Overall Length | 11.06" |
| Phase | 3 |
| Power Factor | 58 |
| Product Datasheet | baldor-motor-vndm3538.pdf |
| Product Family | Dirty Duty Plus |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | C Face |
| Pulley Shaft Indicator | Standard |
| Rpm | 1740 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 15.75 |
| Ship height (cm) | 28.26 |
| Ship length (cm) | 41.91 |
| Ship width (cm) | 29.21 |
| HS code | 85015100 |
| Country of Origin | US |
Product Details:
- Constant Torque Speed Range: 6
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 80.00%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter duty
- KVA Code: M
- Lifting Lugs: No Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 18 AWG
- No-Load Current: 0 A
- Product Family: DIRTY DUTY PLUS
- Pull-Up Torque: 4.67 LB-FT
- Pulley End Bearing Type: Sealed Bearing
- Pulley Face Code: C-Face
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 0.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 6.34 A
- Temp. Rise @ Rated Load: 54 deg C
- Temp. Rise @ S.F. Load: 67 deg C
Documentation:
Explore Products
- MASTERDRIVES B144 Conventional V-Belt
- INSTOCK GRSS909 Shower With Eyewash, Floor Mnt, Stainless Steel Bowl, Galvanized Steel Pipe, Std Mounting
- SPEARS VALVES DV-VTVRK-010 Diaphragm Valve Repair Kit, PTFE, 1 Size, FKM
- MAIN FILTER INC. MF0887879 H56054 Hydraulic Filter, Cellulose, 3 Micron Rating, Viton Seal, 9.25 Inch Height
- PROCON 101A050F12GC Rotary Vane Pump, Brass, 50 GPH, EPDM/Nitrile, External Adjust
- PLAST-O-MATIC MBV150EPT-PP-VENT Manual Ball Valve, Polypro, NPT Threaded Connection, EPDM Seal, 1-1/2 Inch Size
- XTEND & CLIMB 785P+ Telescoping Ladder, 15 ft 6 in, 36 Inch Closed Height, 40 lb Weight
Explore More
- KEYSHAFT
- LIND EQUIPMENT
- SIEMENS
- SOUNDTUBE
- POWEREX
- Bar Clamp/Spreaders
- Automotive Lamps and Bulbs
- Single-Gas Detectors
- Utility Brushes
- Plumb Bobs
- 3M 6000 Series Mold Remediation Respirator Kits
- CONDOR Pigskin Leather Standard General Purpose Gloves
- CHICAGO PNEUMATIC CP6060/CP6070 Series Impact Wrenches
- KEO Dovetail Cutters
- KEO Zero Flute Countersinks And Deburring Tools, Cobalt
- DAYTON Heavy Duty Exhaust Fans, Galvanised Steel Frame
- CONDOR Vinyl, Safety Sign, 10 Inch Width
- GROVE GEAR GR Series, H-H1 Style, 826 Size, Ironman Worm Gear Reducers
- CONDOR Turnout and Extrication Pants
- DBI-SALA Sleeves
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR VNDM3538 Dirty Duty Plus Motor, 230/460V, 1800 RPM, 60 Hz, 0.5 hp, 3 Phase, TENV, 56C Frame
€1,006.76 /unit