BALDOR MOTOR VFDFL3516TM Farm Duty Motor, 230V, 1800 RPM, 2 hp, 1 Phase, TEFC, 145TC Frame
Get it by Tuesday, Dec 23
€2,127.72 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Farm Duty Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 8.9A @ 208V, 7.9A @ 230V |
| Amps @ Volts | 8.9A @ 208V, 7.9A @ 230V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 10.7 lbs.-ft. |
| Conduit Box Material | Steel |
| Conduit Box Position | F2 |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 82.5% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 145TC |
| Frame Material | Steel |
| Frame Size | 145TC |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 7.9A |
| Full Load Torque | 0 lbs.-ft. |
| Full Load Torque | 0 ft.-lbs. |
| Grease Temp. | -20°F to +300°F |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 7.9A |
| Hp | 2 hp |
| Insulation Class | Class F |
| Inverter Code | Not Inverter |
| Kva Code | H |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 2 @ 16 AWG, A PH |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3535LC |
| Mounting Type | C Face, Footless |
| Nameplate Rpm | 1740 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 2 hp @ 60 Hz |
| Overall Length | 14.17" |
| Phase | 1 |
| Power Factor | 99 |
| Product Datasheet | baldor-motor-vfdfl3516tm.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C Face |
| Pulley Shaft Indicator | Standard |
| Rpm | 1740 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 7/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Thermal Protection | Manual |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230V |
| Voltage @ Frequency | 230V @ 60 Hz |
| Winding Thermal 1 | Manual Thermal Overload |
| Winding Thermal 1 Location | Ko |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 23.85 |
| Ship height (cm) | 33.33 |
| Ship length (cm) | 49.21 |
| Ship width (cm) | 34.93 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 82.50%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Not inverter
- KVA Code: H
- Lifting Lugs: No Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 2 @ 16 AWG, A PH
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 10 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: C-Face
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 0.875 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Starting Current: 52.8 A
- Temp. Rise @ Rated Load: 75 deg C
- Temp. Rise @ S.F. Load: 93 deg C
Documentation:
Product Variants
| Product | Model | Hp | Frame | Nameplate Rpm | Service Factor | Overall Length | Motor Type | Power Factor | Voltage | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
VFDFL3610TM | 3 hp | 184TC | 1750 RPM | 1 | 18.04" | 3640LC | 76 | 230V | €2,882.42 | |
|
VFDFL3612TM | 5 hp | 184TC | - | 1 | 18.04" | 3646LC | 88 | 230V | €3,519.65 |
Explore Products
- FABORY M39060.025.0008 Spring Pin, 2.5 mm Nominal Dia., Steel, 8 mm Lg., Plain, Slotted
- LYON 7G5802-1 Snap In Place Locker Base Panel, 6 Inch Size, Front, 1 Bases/Pedestal, Steel
- CONTINENTAL PLG07525-15-31 Air Hose, 3/4 Inch Hose Inside Dia, Gray, Brass 3/4 Inch Fnpt X Brass 3/4 Inch Mnpt
- MANITOWOC 8173 Sensor Block Label Assembly
- WORLDWIDE ELECTRIC SSPE1.5-18-145TCRD Motor, 1.5 HP, 1800 RPM, 208-230/460V, 145TC Frame, C-Face Round Body, Stainless Steel
- APOLLO VALVES 88A140TC Carbon Steel Class 150 STD Port Ball Valve, Hydro Static Tested with Certification 3 Inch, 2 x Flange
- GRAINGER ZUSAH70MD013 O-Ring, 7/16 Inch Inside Dia, 9/16 Inch Outside Dia, 70 Shore A, Black
- MARTIN SPROCKET 60BS72 1 3/8 Roller Chain Sprocket, Bore To Size, 1.375 Inch Bore, 17.628 Inch Outside Dia. Steel
Explore More
- 80/20
- KDR-LINE REACTORS
- KEYSHAFT
- SCOTSMAN
- AMERICAN FILTER CO
- Stem Casters
- Moisture Meter Accessories
- EZ-Clip
- Oil Filter and Can Crushers
- Earth Auger
- MCR SAFETY Ninja Ice Insulated Yellow Work Gloves
- VALEO GLOVES Economy 7 Inch Elastic Belts
- ASSOCIATED SPRING RAYMOND M2 Gas Springs
- ANVIL AS1100 Series Rigid Steel Conduit Clamps, Zinc Trivalent Chromium
- NTN Open Radial Ball Bearing
- APPLETON ELECTRIC 70 Watt, High Pressure Sodium Light Fixture
- AKRO-MILS Akrogrid Series Short Dividers
- CROSSFIRE Dark Tinted Safety Glasses for Bright Light Use
- POWER FIRST Partially Insulated Piggyback Disconnects
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR VFDFL3516TM Farm Duty Motor, 230V, 1800 RPM, 2 hp, 1 Phase, TEFC, 145TC Frame
€2,127.72 /unit