BALDOR MOTOR VEL11308 Single Phase Open Motor, 115/230V, 1200 RPM, 60 Hz, 0.75 hp, ODP, 56C Frame
Get it by Friday, Dec 19
€1,450.26 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Voltage | 3.1A @ 230V, 6.2A @ 115V |
| Amps @ Volts | 6.2A @ 115V, 3.1A @ 230V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 5.67 lbs.-ft. |
| Conduit Box Material | Steel |
| Conduit Box Position | F1 |
| Design Code | L |
| Drip Cover | Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 80.2% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | ODTF |
| Feedback Device | NO FEEDBACK |
| Frame | 56C |
| Frame Material | Steel |
| Frame Size | 56C |
| Frequency | 60.00 Hz |
| Frequency | 60 Hz |
| Front Face Code | Drip Cover Mounting |
| Full Load Amps | 6.2A @ 115V, 3.1A @ 230V |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 3.1A |
| Hp | 3/4 hp |
| Insulation Class | Class F |
| Inverter Code | Not Inverter |
| Kva Code | G |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Enclosure Design | Open Dripproof |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 6 @ 18 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3530LC |
| Mounting Type | C Face, Footless |
| Nameplate Rpm | 1140 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 6 |
| No. Of Speeds | 1 |
| Output @ Frequency | 3/4 hp @ 60 Hz |
| Overall Length | 14.12" |
| Phase | 1 |
| Power Factor | 95 |
| Product Datasheet | baldor-motor-vel11308.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C Face |
| Pulley Shaft Indicator | Standard |
| Rpm | 1140 RPM |
| Rpm Range | 1100-1200 RPM |
| Service Factor | 1 |
| Shaft Dia. | 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1200 RPM |
| Synchronous Rpm @ Frequency | 1200 RPM @ 60 Hz |
| Synchronous Speed | 1200 RPM |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 115-230V |
| Voltage @ Frequency | 115V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 21.15 |
| Ship height (cm) | 33.33 |
| Ship length (cm) | 49.21 |
| Ship width (cm) | 34.93 |
| HS code | 85013100 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - VL1308
- Drip Cover: Drip Cover
- Efficiency @ 100% Load: 80.20%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Not inverter
- KVA Code: G
- Lifting Lugs: No Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 6 @ 18 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 5.1 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: C-Face
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 0.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 37.1 A
- Temp. Rise @ Rated Load: 35 deg C
Documentation:
Product Variants
| Model | Motor Enclosure Design | Voltage | Nameplate Rpm | Hp | Mounting Type | Motor Type | Service Factor | Frame | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| KEL11203 | Open Dripproof | 115-230V | 1725 RPM | 1/4 hp | C Face, Footless | 3411LC | 1.35 | 56C | €678.16 | |
| KEL11205 | Open Dripproof | 115/208-230V | 3475 RPM | 1/3 hp | C Face, Footless | 3413LC | 1.35 | 56C | €736.67 | |
| KEL11205A | Open Dripproof | 115-230V | 3475 RPM | 1/3 hp | C Face, Footless | 3413LC | 1.35 | 56C | €778.99 | |
| KL1200 | Open Air Over | 115/230V | 1725 RPM | 17/100 hp | C Face, Footless | Capacitor Start/Induction Run | 1.35 | 56C | €509.71 | |
| VEL11309 | Open Dripproof | 115-230V | 3480 RPM | 1 hp | C Face, Footless | 3524LC | 1.25 | 56C | €947.29 | |
| VEL11313 | Open | 115-230V | 3450 RPM | 1 1/2 hp | Face | 3532LC | 1.15 | 56C | €1,459.02 | |
| VEL11317 | Open | 115/230V | 3450 RPM | 2 hp | Face | Capacitor Start | 1.15 | 56C | €1,627.03 |
Explore Products
- REGAL 008558AS88 Spiral Flute Tap, 5/8-11 Size, H3 Limit, 4 Flutes, Bottom With TiALN Coating
- TRIM LOK INC 4100B3X3/16A-250 Trim Seal Aluminium Clip 0.36 Inch Width 250 Feet
- CONTINENTAL 1600 8M 50 Gearbelt Hawk Pd 200 Teeth 50mm
- TENSABARRIER ROPE-TWST-35-06/0-X-XXXX-XX Classic Post Rope Twisted Rope Yellow
- BALDOR / DODGE 232219 30X10 CR DR XT50 30X10 Crown Drum XT50
- DIXON F32-3 Standard Ferrule
- ZOELLER 294-0018
- CONEX BANNINGER PS5130 0545454 Tee Equal, 54mm Size
Explore More
- KEYSHAFT
- LR NELSON
- TAPMATIC
- SOLIDDRIVE
- PASLODE
- Submersible Sewage Pumps
- Shipping Label and Tape Dispensers
- Rotary Encoders
- Beakers
- Conveyor Assembly And Dryer Trays
- TURTLESKIN CP Apron
- PS DOORS Access Hatches
- SUGATSUNE Pull Handles, 316 Stainless Steel
- ANVIL AS929 Series U Supports
- APC BY SCHNEIDER ELECTRIC Power Cord Kit
- LINN GEAR Mill and Engineering Chain Sprockets, 1240 Mill Chain
- PBC LINEAR Rolls
- SIEMENS Disconnects
- NIBCO KM-590-CS-R-66-FS-LL Three-Piece Carbon Steel Ball Valves, Fire Safe, Socket Weld ISO Mount End
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR VEL11308 Single Phase Open Motor, 115/230V, 1200 RPM, 60 Hz, 0.75 hp, ODP, 56C Frame
€1,450.26 /unit