BALDOR MOTOR KEL11205 Single Phase Open Motor, 115/230V, 3600 RPM, 60 Hz, 0.33 hp, ODP, 56C Frame
Get it by Friday, Dec 19
€736.67 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Voltage | 1.5A @ 230V, 1.6A @ 208V, 3A @ 115V |
| Amps @ Volts | 3A @ 115V, 1.6A @ 208V, 1.5A @ 230V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 1.37 lbs.-ft. |
| Conduit Box Position | F1 |
| Design Code | N |
| Drip Cover | Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 70.5% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | Open |
| Feedback Device | NO FEEDBACK |
| Frame | 56C |
| Frame Material | Steel |
| Frame Size | 56C |
| Frequency | 60.00 Hz |
| Frequency | 60 Hz |
| Front Face Code | Drip Cover Mounting |
| Full Load Amps | 3A @ 115V, 1.6A @ 208V, 1.5A @ 230V |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 1.5A |
| Hp | 1/3 hp |
| Insulation Class | Class B |
| Inverter Code | Not Inverter |
| Kva Code | H |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Enclosure Design | Open Dripproof |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 6 @ 18 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3413LC |
| Mounting Type | C Face, Footless |
| Nameplate Rpm | 3475 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 2 |
| No. Of Speeds | 1 |
| Output @ Frequency | 1/3 hp @ 60 Hz |
| Overall Length | 11.85" |
| Phase | 1 |
| Power Factor | 97 |
| Product Datasheet | baldor-motor-kel11205.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C Face |
| Pulley Shaft Indicator | Standard |
| Rpm | 3475 RPM |
| Rpm Range | 3400-3600 RPM |
| Service Factor | 1.35 |
| Shaft Dia. | 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 3600 RPM |
| Synchronous Rpm @ Frequency | 3600 RPM @ 60 Hz |
| Synchronous Speed | 3600 RPM |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 115/208-230V |
| Voltage @ Frequency | 115V @ 60 Hz, 208V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 10.8 |
| Ship height (cm) | 28.26 |
| Ship length (cm) | 41.91 |
| Ship width (cm) | 29.21 |
| HS code | 85013100 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - KL1205
- Drip Cover: Drip Cover
- Efficiency @ 100% Load: 70.50%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Not inverter
- KVA Code: H
- Lifting Lugs: No Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 6 @ 18 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 1.11 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: C-Face
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 0.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 21.7 A
- Temp. Rise @ Rated Load: 14 deg C
- Temp. Rise @ S.F. Load: 17 deg C
Documentation:
Product Variants
| Model | Motor Enclosure Design | Voltage | Nameplate Rpm | Hp | Mounting Type | Motor Type | Service Factor | Frame | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| KEL11203 | Open Dripproof | 115-230V | 1725 RPM | 1/4 hp | C Face, Footless | 3411LC | 1.35 | 56C | €678.16 | |
| KEL11205A | Open Dripproof | 115-230V | 3475 RPM | 1/3 hp | C Face, Footless | 3413LC | 1.35 | 56C | €778.99 | |
| KL1200 | Open Air Over | 115/230V | 1725 RPM | 17/100 hp | C Face, Footless | Capacitor Start/Induction Run | 1.35 | 56C | €509.71 | |
| VEL11308 | Open Dripproof | 115-230V | 1140 RPM | 3/4 hp | C Face, Footless | 3530LC | 1 | 56C | €1,450.26 | |
| VEL11309 | Open Dripproof | 115-230V | 3480 RPM | 1 hp | C Face, Footless | 3524LC | 1.25 | 56C | €947.29 | |
| VEL11313 | Open | 115-230V | 3450 RPM | 1 1/2 hp | Face | 3532LC | 1.15 | 56C | €1,459.02 | |
| VEL11317 | Open | 115/230V | 3450 RPM | 2 hp | Face | Capacitor Start | 1.15 | 56C | €1,627.03 |
Explore Products
- UNIWELD RTBM12 Mandrel, 1/2 Inch Size
- MAIN FILTER INC. MF0418066 30133 Interchange Hydraulic Filter, Glass, 3 Micron Rating, Viton Seal, 9.25 Inch Height
- TENSABARRIER 889U-3S-3S-MAX-NO-R5X-C Barrier Post With Belt, Steel, Satin Stainless Steel, 38 Inch Post Height
- BUSSMANN AGA-1/2 Automotive Fuse, Fast Blow, 500mA, 250VAC
- MAIN FILTER INC. MF0893718 P7400SP42006 Interchange Spin-On Filter, Glass, 5 Micron Rating, Buna Seal, 5.31 Inch Height
- INGERSOLL-RAND 231-665 Impact Wrench Screw
- KUNKLE 918BFEE07-LE Safety Relief Valve, Male X Female NPT, 1 Inch Inlet Size, Steam, Stainless Steel
- ANVIL 0500118088 10-12 Welded Galvanized
Explore More
- KEYSHAFT
- TRIDENT
- GOLDEN STAR
- BVA HYDRAULICS
- GEMPLERS
- Air Tool Accessories
- Warning Whip Accessories
- Multi-Material Screws
- Oil Filter and Can Crushers
- Cryogenic Hoses
- AKRO-MILS 30281 Akrobins Super Size Bins
- DWYER INSTRUMENTS DH3 Series Digihelic Differential Pressure Controllers
- CONDOR Leather Coated Cut Resistant Gloves, Cut Level A4
- ANSELL 11-801 Hyflex Black Gray Nitrile Coated Gloves
- MILLER ELECTRIC Metalworker Welding Gloves
- VERMONT GAGE NoGo Standard Thread Plug Gages, 2-8 Un
- EATON Meters
- MAXLITE Full Size Wall Packs
- MANITOWOC Brackets
- JOMAR VALVE High Performance Butterfly Valves, Stainless Steel Body, ANSI Class 300, RPTFE Seat, Gear Operator
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR KEL11205 Single Phase Open Motor, 115/230V, 3600 RPM, 60 Hz, 0.33 hp, ODP, 56C Frame
€736.67 /unit