BALDOR MOTOR KEL11205A Single Phase Open Motor, 115/230V, 3600 RPM, 60 Hz, 0.33 hp, ODP, 56C Frame
Get it by Thursday, Dec 18
€778.99 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Voltage | 1.5A @ 230V |
| Amps @ Volts | 3A @ 115V, 1.6A @ 208V, 1.5A @ 230V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 1.37 lbs.-ft. |
| Conduit Box Position | F1 |
| Design Code | N |
| Drip Cover | Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 70.5% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | ODP |
| Feedback Device | NO FEEDBACK |
| Frame | 56C |
| Frame Material | Steel |
| Frame Size | 56C |
| Frequency | 60.00 Hz |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 1.5A |
| Hp | 1/3 hp |
| Insulation Class | Class F |
| Inverter Code | Not Inverter |
| Kva Code | H |
| Lifting Lugs | No Lifting Lugs |
| Line-line Res. @ 25° C | 1.8711 ohms A Ph/3.6847 ohms B Ph |
| Locked Bearing Indicator | Locked Bearing |
| Locked-rotor Torque | 1.63 lbs.-ft. |
| Motor Design | Capacitor Start/Run |
| Motor Enclosure Design | Open Dripproof |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 7 @ 18 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3413LC |
| Mounting Type | C Face, Footless |
| Nameplate Rpm | 3475 RPM |
| Nema/iec | NEMA |
| No Load Amps | 0A |
| No. Of Poles | 2 |
| No. Of Speeds | 1 |
| Output @ Frequency | 1/3 hp @ 60 Hz |
| Overall Length | 12.66" |
| Phase | 1 |
| Power Factor | 97 |
| Product Datasheet | baldor-motor-kel11205a.pdf |
| Product Family | General Purpose |
| Pull-up Torque | 1.11 lbs.-ft. |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | C Face |
| Pulley Shaft Indicator | Standard |
| Rpm | 3475 RPM |
| Rpm Range | 3400-3600 RPM |
| Service Factor | 1.35 |
| Shaft Dia. | 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Configuration | DOL |
| Start Type | Direct On Line |
| Starting Amps | 21.7A |
| Synchronous Rpm | 3600 RPM |
| Synchronous Rpm @ Frequency | 3600 RPM @ 60 Hz |
| Synchronous Speed | 3600 RPM |
| Temp. Rise @ Rated Load | 14°C |
| Temp. Rise @ S. F. Load | 17°C |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 115-230V |
| Voltage @ Frequency | 115V @ 60 Hz |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | Sb |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 10.8 |
| Ship height (cm) | 28.26 |
| Ship length (cm) | 41.91 |
| Ship width (cm) | 29.21 |
| HS code | 85013100 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - KL1205A
- Drip Cover: Drip Cover
- Efficiency @ 100% Load: 70.50%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Not inverter
- KVA Code: H
- Lifting Lugs: No Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 7 @ 18 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 1.11 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: C-Face
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 0.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 21.7 A
- Temp. Rise @ Rated Load: 14 deg C
- Temp. Rise @ S.F. Load: 17 deg C
Documentation:
Product Variants
| Model | Motor Enclosure Design | Voltage | Nameplate Rpm | Hp | Mounting Type | Motor Type | Service Factor | Frame | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| KEL11203 | Open Dripproof | 115-230V | 1725 RPM | 1/4 hp | C Face, Footless | 3411LC | 1.35 | 56C | €678.16 | |
| KEL11205 | Open Dripproof | 115/208-230V | 3475 RPM | 1/3 hp | C Face, Footless | 3413LC | 1.35 | 56C | €736.67 | |
| KL1200 | Open Air Over | 115/230V | 1725 RPM | 17/100 hp | C Face, Footless | Capacitor Start/Induction Run | 1.35 | 56C | €509.71 | |
| VEL11308 | Open Dripproof | 115-230V | 1140 RPM | 3/4 hp | C Face, Footless | 3530LC | 1 | 56C | €1,450.26 | |
| VEL11309 | Open Dripproof | 115-230V | 3480 RPM | 1 hp | C Face, Footless | 3524LC | 1.25 | 56C | €947.29 | |
| VEL11313 | Open | 115-230V | 3450 RPM | 1 1/2 hp | Face | 3532LC | 1.15 | 56C | €1,459.02 | |
| VEL11317 | Open | 115/230V | 3450 RPM | 2 hp | Face | Capacitor Start | 1.15 | 56C | €1,627.03 |
Explore Products
- BANJO FITTINGS PV100-075 Poly Pinch Valve Epdm, 1 X 3/4 Inch Size
- APPROVED VENDOR T4BNH22 Pipe 1 1/2 Inch 304 Stainless Steel 60 Inch Length Schedule 40
- BEHRINGER SYSTEMS ST1038-PP BEHRINGER PIPE SYSTEMS ST1038-PP
- WALTER TOOLS DC170-12-03.969A1-WJ30EJ 6745463 Long Drill Bit, 5/32 Inch Drill Bit Size, 6 mm Shank Dia, 4 1/64 Inch Overall Length
- HUBBELL-WIEGMANN HW-J80804SC Enclosure, Screws, 8 Inch Height, 8 Inch Width
- EXTECH PT30 Transducer Pressure 0.02 To 29 Psi
- SAFEWAY 34-3 Dust Plug Metal
- KNIPEX 16 85 125 SB Cable Stripper 5/16 To 33/64 Inch 4-3/8 In
Explore More
- JET TOOLS
- KEYSHAFT
- METALPRO
- SCIENTIFIC CUTTING TOOLS
- NOVAFLEX
- Flat Washers
- LED Can Light Retrofit Kits
- Breathers
- Food Station Accessories
- Drum Tumblers
- ALLPAX GASKET CUTTER SYSTEMS 6000 Series Heavy Duty Gasket Cutter Kits
- ANSELL 88-390 Alphatec Neoprene Natura Latex Chemical Resistant Gloves
- RINGERS GLOVES Form Fitting Lightweight Tactical Gloves
- MILLER BY HONEYWELL Double D-Ring Body Belts, With Pad
- JOHN GUEST Male Connectors, NPTF Thread, Acetal Gray
- STANLEY Soft Face Hammer
- USA SEALING Rod Stock, 13, 000 psi Tensile Strength
- FULHAM Exit Sign with Emergency Lights
- NIBCO Unions, Wrot and Cast Copper
- SIOUX CHIEF PowerPEX ASTM F3347 Brass Ball Valves
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR KEL11205A Single Phase Open Motor, 115/230V, 3600 RPM, 60 Hz, 0.33 hp, ODP, 56C Frame
€778.99 /unit