BALDOR MOTOR GDL3774T Grain Dryer Motor, 230V, 1800 RPM, 60 Hz, 10 hp, 1 Phase, TEFC, 215TZ Frame
Get it by Thursday, Dec 18
€5,060.92 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Farm Duty Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Voltage | 38A @ 230V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 78.7 lbs.-ft. |
| Conduit Box Material | Cast Iron |
| Conduit Box Position | F1 |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 86.5% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 215TZ |
| Frame Material | Iron |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 38A |
| Full Load Torque | 0 lbs.-ft. |
| Full Load Torque | 0 ft.-lbs. |
| Grease Temp. | -20°F to +300°F |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 38A |
| Hp | 10 hp |
| Insulation Class | Class F |
| Inverter Code | Not Inverter |
| Kva Code | F |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Cap Box |
| Motor Lead Quantity/wire Size | 2 @ 10 AWG, A PH |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Rigid Base |
| Motor Type | 0748LC |
| Mounting Type | Rigid Base |
| Nameplate Rpm | 1740 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 10 hp @ 60 Hz |
| Overall Length | 19.45" |
| Phase | 1 |
| Power Factor | 98 |
| Product Datasheet | baldor-motor-gdl3774t.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rpm | 1740 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1 |
| Shaft Dia. | 1 3/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Thermal Device - Winding | Normally Closed Thermostat |
| Thermal Protection | Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230V |
| Voltage @ Frequency | 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 94.5 |
| Ship height (cm) | 64.77 |
| Ship length (cm) | 78.74 |
| Ship width (cm) | 60.96 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 86.50%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Not inverter
- KVA Code: F
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: Cap Box
- Motor Lead Quantity/Wire Size: 2 @ 10 AWG, A PH
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 58 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 1.375 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Starting Current: 232 A
Documentation:
Explore Products
- ANVIL 0338038706 3 X 2 Extra Heavy Eccentric Bevel Both Ends Swage Nipple
- COOPER B-LINE 48486 SC NK Junction Box, Type 1, 6 x 48 x 48 Inch Size, Screw Cover, Carbon Steel
- WARING COMMERCIAL WFP14S1 Serrated S Blade, Stainless Steel
- TSUBAKI RS12-1B24
- DIXON HTM650 Hi-Torque Clamp, 5 Inch Size, 300 Stainless Steel Band, Steel Screw
- SPEARS VALVES 836-102C Reducer Male Adapter, MPT x Socket, Schedule 80, 3/4X1 Inch Size, CPVC
- TB WOODS AJ30H178 Disc Coupling Hub, Aj30-H X 1 Size
- SCIENTIFIC CUTTING TOOLS TM740-8NPS-HA 121017 NPS Thread Mill, Carbide Altin, 0.74 Dia, 4 Helical Flutes, 3/4 Shank Dia
Explore More
- CDI TORQUE PRODUCTS
- KEYSHAFT
- MEDCASTER
- SIOUX CHIEF
- R W ROGERS COMPANY
- Temporary Job Site Lighting Accessories
- Router Bit Sets
- Rebar Locators
- Hazardous Location Safety and Disconnect Switches
- Oil Seals
- CHICAGO PROTECTIVE APPAREL ARC Flash Jacket And Bib Kit
- TEMPCO Ceramic Band Heaters
- MAYHEW TOOLS Hollow Punches, Metric
- ANVIL AS871 Series Safety Anchor Straps
- BRADY Pipe Marker, High Pressure Air
- APOLLO VALVES 70LF-400 Series Single Union End Solder Bronze Ball Valves
- SPEARS VALVES PVC White Schedule 40 Fitting Short Repair Couplings, Spigot x Socket, EPDM O-Ring
- NICHOLSON Knife Files
- WATTS RK-FBVS-4 Series Shutoff Valve Repair Kit
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR GDL3774T Grain Dryer Motor, 230V, 1800 RPM, 60 Hz, 10 hp, 1 Phase, TEFC, 215TZ Frame
€5,060.92 /unit