BALDOR MOTOR GDL2333T Grain Dryer Motor, 230V, 1800 RPM, 60 Hz, 16 hp, 1 Phase, TEFC, 256TZ Frame
Get it by Monday, Dec 22
€7,532.15 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Farm Duty Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 69A @ 208V, 61A @ 230V |
| Amps @ Volts | 69A @ 208V, 61A @ 230V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 144 lbs.-ft. |
| Conduit Box Material | Cast Iron |
| Conduit Box Position | F1 |
| Design Code | L |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 87.5% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 256TZ |
| Frame Material | Iron |
| Frame Size | 256TZ |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 61A |
| Full Load Torque | 0 ft.-lbs. |
| Full Load Torque | 0 lbs.-ft. |
| Grease Temp. | -20°F to +300°F |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 61A |
| Hp | 16 hp |
| Insulation Class | Class F |
| Inverter Code | Not Inverter |
| Kva Code | C |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Cap Box |
| Motor Lead Quantity/wire Size | 2 @ 6 AWG, A PH |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Rigid Base |
| Motor Type | 0956LC |
| Mounting Type | Rigid Base |
| Nameplate Rpm | 1740 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 16 hp @ 60 Hz |
| Overall Length | 24.36" |
| Phase | 1 |
| Power Factor | 96 |
| Product Datasheet | baldor-motor-gdl2333t.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rpm | 1740 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1 |
| Shaft Dia. | 1 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Thermal Device - Winding | Normally Closed Thermostat |
| Thermal Protection | Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 208-230V |
| Voltage @ Frequency | 208V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 139.5 |
| Ship height (cm) | 49.85 |
| Ship length (cm) | 78.74 |
| Ship width (cm) | 60.33 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 87.50%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Not inverter
- KVA Code: C
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: Cap Box
- Motor Lead Quantity/Wire Size: 2 @ 6 AWG, A PH
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 73.7 LB-FT
- Pulley End Bearing Type: Sealed Bearing
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 1.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Starting Current: 250 A
- Temp. Rise @ Rated Load: 83 deg C
Documentation:
Explore Products
- AIRMASTER FAN 21777 Gear Box Assembly
- GARLOCK SEALING TECHNOLOGIES 26 X 5784
- BALDWIN FILTERS PA5317 Air Filter Element/cab
- KM SYSTEMS KM63TSPCLNL12HPC Insert
- HUBBELL WIRING DEVICE-KELLEMS RF2306PB030 Receptacle, Female, With 30 Feet Cable, 20 A, 6 Pole
- BRADY 105639 Lockout Tag, 1-1/2 x 3 Inch, None/ No Header, E-1, Polystyrene, English
- MARTIN SPROCKET 65D Ball-Peen Hammer, 16 oz. Head Size, Wood Coating, Steel
- BALDOR / DODGE 229009 24X32 Crown Drum XT35 1/2 Herringbone Lagging
Explore More
- KEYSHAFT
- THERMOSEAL
- ERICSON
- WIRTHCO
- NVENT
- Tapered and QD Bushings
- Test Equipment
- Punch Driver Sets
- Gear Racks
- Cryogenic Solenoid Valves
- UVEX BY HONEYWELL SVP 200 Series Safety Eyewears
- JOHN GUEST Stem Adapters, NPTF Thread, Polypropylene White
- ACME ELECTRIC WI300 Series Medium Voltage Transformers, 3 Phase, 60Hz, 2.5kV & 5kV Class
- MUELLER INDUSTRIES 794F Duplex Basket Strainers
- ANVIL AS210KO Series Channel With Knock Outs
- JAMCO Stock Cart
- KLEIN TOOLS Driver Glove
- TB WOODS Multi Beam Coupling
- VESTIL BPC Series Decorative Bollard Covers, Pawn Type
- PYRAMEX Dark Tinted Safety Glasses for Bright Light Use
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR GDL2333T Grain Dryer Motor, 230V, 1800 RPM, 60 Hz, 16 hp, 1 Phase, TEFC, 256TZ Frame
€7,532.15 /unit