BALDOR MOTOR EMVM3711D IEC Frame Motor, 3600 RPM, 60 Hz, 10 hp, 7.5kW, 3 Phase, TEFC, D132SD Frame
Get it by Thursday, Dec 18
€3,429.63 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | IEC Frame AC Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Voltage | 11.8A @ 460V, 23.6A @ 230V, 24.9A @ 208V |
| Amps @ Volts | 24.9A @ 208V, 23.6A @ 230V, 11.8A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 45.7 lbs.-ft. |
| Conduit Box Position | B5 |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 90.2% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | D132SD |
| Frame Material | Steel |
| Frame Prefix | D |
| Frame Size | D132SD |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 24.9A @ 208V, 23.6A @ 230V, 11.8A @ 460V |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 11.8A |
| Hp | 7 1/2 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | G |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 14 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3728M |
| Mounting Type | B5 Flange |
| Nameplate Rpm | 3490 RPM |
| Nema/iec | IEC |
| No. Of Poles | 2 |
| No. Of Speeds | 1 |
| Output @ Frequency | 7.5 kW @ 60 Hz |
| Output Kw | 7.5 kW |
| Overall Length | 19.35" |
| Phase | 3 |
| Power | 7.5 kW |
| Power Factor | 87 |
| Product Datasheet | baldor-motor-emvm3711d.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | D Flange |
| Pulley Shaft Indicator | Tapped, Key |
| Rpm | 3490 RPM |
| Rpm Range | 3400-3600 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1.497" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm @ Frequency | 3600 RPM @ 60 Hz |
| Synchronous Speed | 3600 RPM |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 208-230/460V |
| Voltage @ Frequency | 230V @ 60 Hz, 460V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 53.1 |
| Ship height (cm) | 41.28 |
| Ship length (cm) | 67.63 |
| Ship width (cm) | 42.23 |
| HS code | 85015220 |
| Country of Origin | FI |
Product Details:
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 90.20%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: G
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 14 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 21.9 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: D-Flange
- Pulley Shaft Indicator: Tapped & Key
- Shaft Diameter: 1.497 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 76.1 A
- Temp. Rise @ Rated Load: 80 deg C
- Temp. Rise @ S.F. Load: 98 deg C
Documentation:
Product Variants
| Model | Voltage | Nameplate Rpm | Hp | Mounting Type | Service Factor | Motor Type | Frame | Ambient Temp. | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| EMVM3545D | 230/460V | 3450 RPM | 3/4 hp | B5 Flange | 1.15 | 3420M | D80D | 40°C | €1,286.47 | |
| EMVM3546D | 230/460V | 1760 RPM | 3/4 hp | B5 Flange | 1.15 | 3520M | D80D | 40°C | €1,326.23 | |
| EMVM3550D | 208-230/460V | 3500 RPM | 1 1/10 hp | B5 Flange | 1.15 | 3520M | D80D | 40°C | €1,345.15 | |
| EMVM3554D | 208-230/460V | 1760 RPM | 1 1/10 hp | B5 Flange | 1.15 | 3526M | D90SD | 40°C | €1,345.15 | |
| EMVM3555D | 208-230/460V | 3490 RPM | 1 1/2 hp | B5 Flange | 1.15 | 3526M | D90SD, LD | 40°C | €1,457.80 | |
| EMVM3558D | 208-230/460V | 1755 RPM | 1 1/2 hp | B5 Flange | 1.15 | 3528M | D90LD | 40°C | €1,418.05 | |
| EMVM3611D | 208-230/460V | 1760 RPM | 11/5 hp | B5 Flange | 1.15 | 3632M | D100D | 40°C | €1,694.47 |
Explore Products
- MARTIN SPROCKET CSD30032X45 Drum Pulley, Standard, 30 Inch Outside Dia., MXT45 Bushing, 32 Inch Face Width, Steel
- WATTS WB-75 0888600 Fiberglass Protective Insulated Backflow Enclosure, 19 X 11 X 22 Inch Size
- SMC VALVES VV5QC41-1202SD6Q2 Valve Manifold, 5 Inch Port Size
- MASTERDRIVES L035-1/8 Jaw Coupling Hub, 1/8 Inch Size
- CINCINNATI FAN BKF46W
- MASTER LOCK A1165KAMKBRN Anodized Aluminium Safety Padlock With Master Key, 1 Inch Tall Shackle, Keyed Alike, 6 Pin Locking, Brown
- VERMONT GAGE 141192440 Plug Gage, Class X, Go, Steel, 0.9244 Inch Size
- LEWISBINS CSN2013-1 Grey Container Cover, 20.6 Inch Length, 13.2 Inch Width, 1.3 Inch Height, Grey
Explore More
- KEEPER
- KEYSHAFT
- UNGER
- FOUNTAINHEAD
- SLICE
- Milling and Drilling Machines
- Push to Connect Tube Fittings
- Fire Hose and Hydrant Valves
- Strut Channel
- Pin Vises
- CASH ACME Temperature & Pressure Relief Valve, 150 psi
- AUTOQUIP Hydraulic Freight Lifts
- VIEGA PROPRESS Female Adapter, Bronze, Press x FNPT
- HARVEL CLEAR PVC Female Adapters
- KEO Combined Drills And Countersinks, Bell Type, 60 Degrees Countersink Angle
- MAUDLIN PRODUCTS Shim Stock, Flat Shim
- PETERSEN PRODUCTS 140-5 Series Pipe Plug
- ZSI-FOSTER Cush-A-Grip Clamps
- EATON 190627 Series Male Pipes
- BOUTON OPTICAL Dark Tinted Safety Glasses for Bright Light Use
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR EMVM3711D IEC Frame Motor, 3600 RPM, 60 Hz, 10 hp, 7.5kW, 3 Phase, TEFC, D132SD Frame
€3,429.63 /unit