BALDOR MOTOR EMVM3546D IEC Frame Motor, 1800 RPM, 60 Hz, 1 hp, 0.75kW, 3 Phase, TEFC, D80D Frame
Get it by Friday, Dec 19
€1,326.23 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | IEC Frame AC Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Voltage | 1.5A @ 460V, 3A @ 230V, 3.1A @ 208V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 10.8 lbs.-ft. |
| Conduit Box Position | B5 |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 85.5% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | D80D |
| Frame Material | Steel |
| Frame Prefix | D |
| Frame Size | D80D |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 3.1A @ 208V, 3A @ 230V, 1.5A @ 460V |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 1.5A |
| Hp | 3/4 hp |
| Insulation Class | Class F |
| Inverter Code | Not Inverter |
| Kva Code | L |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 18 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3520M |
| Mounting Type | B5 Flange |
| Nameplate Rpm | 1760 RPM |
| Nema/iec | IEC |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 0.75 kW @ 60 Hz |
| Output Kw | 0.75 kW |
| Overall Length | 11.61" |
| Phase | 3 |
| Power | 0.75 kW |
| Power Factor | 71 |
| Product Datasheet | baldor-motor-emvm3546d.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | D Flange |
| Pulley Shaft Indicator | Tapped, Key |
| Rpm | 1760 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 0.748" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 17.1 |
| Ship height (cm) | 28.26 |
| Ship length (cm) | 41.91 |
| Ship width (cm) | 29.21 |
| HS code | 85015100 |
| Country of Origin | FI |
Product Details:
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 85.50%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Not inverter
- KVA Code: L
- Lifting Lugs: No Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 18 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 6.5 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: D-Flange
- Pulley Shaft Indicator: Tapped & Key
- Shaft Diameter: 0.748 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 12.2 A
- Temp. Rise @ Rated Load: 36 deg C
- Temp. Rise @ S.F. Load: 44 deg C
Documentation:
Product Variants
| Model | Voltage | Nameplate Rpm | Hp | Mounting Type | Service Factor | Motor Type | Frame | Ambient Temp. | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| EMVM3545D | 230/460V | 3450 RPM | 3/4 hp | B5 Flange | 1.15 | 3420M | D80D | 40°C | €1,286.47 | |
| EMVM3550D | 208-230/460V | 3500 RPM | 1 1/10 hp | B5 Flange | 1.15 | 3520M | D80D | 40°C | €1,345.15 | |
| EMVM3554D | 208-230/460V | 1760 RPM | 1 1/10 hp | B5 Flange | 1.15 | 3526M | D90SD | 40°C | €1,345.15 | |
| EMVM3555D | 208-230/460V | 3490 RPM | 1 1/2 hp | B5 Flange | 1.15 | 3526M | D90SD, LD | 40°C | €1,457.80 | |
| EMVM3558D | 208-230/460V | 1755 RPM | 1 1/2 hp | B5 Flange | 1.15 | 3528M | D90LD | 40°C | €1,418.05 | |
| EMVM3611D | 208-230/460V | 1760 RPM | 11/5 hp | B5 Flange | 1.15 | 3632M | D100D | 40°C | €1,694.47 | |
| EMVM3613D | 208-230/460V | 3450 RPM | 37/10 hp | B5 Flange | 1.15 | 3634M | D100LD | 40°C | €2,066.49 |
Explore Products
- MICRO 100 BBM-040415 Boring Bar, 15 mm Max. Bore Depth, 4 mm Head Width, 4.400 mm Min. Bore Dia.
- APPROVED VENDOR H6422NE Drill Bushing Type H Drill Size 49/64 In
- MILWAUKEE VALVE 35RCS1NLL -200 Ball Valve, 3 Piece, Reduced Port, Carbon Steel, 2 Inch Valve Size
- DIXON DMH1525F-D Male Hex Nipple, Double, NST x NPT Thread, 2-1/2 x 1-1/2 Inch Thread
- TRITAN UCP207-21 Pillow Block Bearing Ball 1-5/16 Bore
- MAGLINER 86138 Caster Kit, Polyurethane With Polyolefin Core, Red
- HALLOWELL U1258-3PT Wardrobe Locker (1) Wide (3) Openings
- MAIN FILTER INC. MF0812309 110930 Interchange Spin-On Filter, Cellulose, 10 Micron, Buna Seal, 10.94 Inch Height
Explore More
- KEYSHAFT
- PALMGREN
- ABLOY
- HEIN WERNER
- LAVI
- Concrete Edgers and Groovers
- Water and Steam Boilers
- Moisture Meters
- Drum Pump Tubes
- Class H Fuses
- PROTO Impact Socket, 1 Inch, Imperial, Hardened Steel
- ANVIL AS200STS Series Welded Channels
- BRADY Pull Tight Seal
- DIXON Break Apart Attack Nozzles
- MEMPHIS GLOVE Ninja Flex Work Gloves
- STARRETT 251 Steel Beam Trammels And Attachments
- SIOUX CHIEF Gripper Pipe Strainers
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR EMVM3546D IEC Frame Motor, 1800 RPM, 60 Hz, 1 hp, 0.75kW, 3 Phase, TEFC, D80D Frame
€1,326.23 /unit