BALDOR MOTOR EMVM3710D IEC Frame Motor, 1800 RPM, 60 Hz, 7.5 hp, 5.5kW, 3 Phase, TEFC, D132SD Frame
Get it by Thursday, Dec 18
€2,617.43 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | IEC Frame AC Motor |
| Ambient (c) | 50 deg C |
| Ambient Temp. | 50°C |
| Amps @ Voltage | 19A @ 230V, 20A @ 208V, 9.5A @ 460V |
| Amps @ Volts | 20A @ 208V, 19A @ 230V, 9.5A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 70.9 lbs.-ft. |
| Conduit Box Position | B5 |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 91.7% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | D132SD |
| Frame Material | Steel |
| Frame Prefix | D |
| Frame Size | D132SD |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 20A @ 208V, 19A @ 230V, 9.5A @ 460V |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 9.5A |
| Hp | 7 1/2 hp |
| Insulation Class | Class F |
| Inverter Code | Not Inverter |
| Kva Code | J |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 14 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3738M |
| Mounting Type | B5 Flange |
| Nameplate Rpm | 1770 RPM |
| Nema/iec | IEC |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 7 1/2 hp @ 60 Hz |
| Output Kw | 7.5 kW |
| Overall Length | 20.48" |
| Phase | 3 |
| Power Factor | 81 |
| Product Datasheet | baldor-motor-emvm3710d.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | D Flange |
| Pulley Shaft Indicator | Tapped, Key |
| Rpm | 1770 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1 |
| Shaft Dia. | 1.497" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 230V @ 60 Hz, 460V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 67.95 |
| Ship height (cm) | 44.13 |
| Ship length (cm) | 66.99 |
| Ship width (cm) | 41.91 |
| HS code | 85015220 |
| Country of Origin | FI |
Product Details:
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 91.70%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Not inverter
- KVA Code: J
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 14 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 32.6 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: D-Flange
- Pulley Shaft Indicator: Tapped & Key
- Shaft Diameter: 1.497 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 70.9 A
- Temp. Rise @ Rated Load: 63 deg C
- Temp. Rise @ S.F. Load: 77 deg C
Documentation:
Product Variants
| Model | Voltage | Nameplate Rpm | Hp | Mounting Type | Service Factor | Motor Type | Frame | Ambient Temp. | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| EMVM3545D | 230/460V | 3450 RPM | 3/4 hp | B5 Flange | 1.15 | 3420M | D80D | 40°C | €1,286.47 | |
| EMVM3546D | 230/460V | 1760 RPM | 3/4 hp | B5 Flange | 1.15 | 3520M | D80D | 40°C | €1,326.23 | |
| EMVM3550D | 208-230/460V | 3500 RPM | 1 1/10 hp | B5 Flange | 1.15 | 3520M | D80D | 40°C | €1,345.15 | |
| EMVM3554D | 208-230/460V | 1760 RPM | 1 1/10 hp | B5 Flange | 1.15 | 3526M | D90SD | 40°C | €1,345.15 | |
| EMVM3555D | 208-230/460V | 3490 RPM | 1 1/2 hp | B5 Flange | 1.15 | 3526M | D90SD, LD | 40°C | €1,457.80 | |
| EMVM3558D | 208-230/460V | 1755 RPM | 1 1/2 hp | B5 Flange | 1.15 | 3528M | D90LD | 40°C | €1,418.05 | |
| EMVM3611D | 208-230/460V | 1760 RPM | 11/5 hp | B5 Flange | 1.15 | 3632M | D100D | 40°C | €1,694.47 |
Explore Products
- GRAINGER 2074W-017 Bumper 17/32 Inch Black Rubber
- BLACKBURN (T&B) SRG10-20 Standard Bolting Kit
- GATES 77621678 Synchro Power Polyurethane Belt
- SPEARS VALVES BF-BRK-025C Seat Repair Kit, Standard Valve, Buna, 2-1/2 Size, CPVC
- REGAL 050557AM94 End Mill With Alcrona Coated, Single End, 3/4 Inch Dia., 3-7/8 Inch Length, 2 Flutes
- MCR SAFETY 4952M Welding Gloves, Wing Thumb, Gauntlet Cuff, Std, Beige Cowhide, Safety Welding 4952
- APPROVED VENDOR 10348 Threaded Rod, 3/8 In - 24 Thread Size, SS, 12 ft. Lg., Gr. 304, Plain, Fine
- YANKEE 400-0.9375 Reamer Hand Reamer 0.9375 In
Explore More
- CHECKERS
- KEYSHAFT
- MCR SAFETY
- WINTERS INSTRUMENTS
- HUBBELL LIGHTING - OUTDOOR
- Hose Reel Mounting Brackets
- Air Sanders
- International Voltage Converters
- Beakers
- Tire Balancing Beads
- ANSELL 74-048 Hyflex Uncoated Cut Resistant Gloves
- MCR SAFETY Ninja Ice Insulated Yellow Work Gloves
- VIBCO US Series High Frequency Electric Vibrators
- GLOBE SCIENTIFIC Jars, Wide Mouth, 89 mm Opening
- REELCRAFT Dual Pedestal Hose Reels, DP7000 Series, Spring Retractable
- BRADY Pipe Marker, Low Pressure Condensate
- SMC VALVES Vacuum Regulator
- PARKER Filter Cartridges, Honeycomb Wound
- AIRMASTER FAN CWF Series TEFC Type Belt Drive Cabinet Fans with Auto Shutters
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR EMVM3710D IEC Frame Motor, 1800 RPM, 60 Hz, 7.5 hp, 5.5kW, 3 Phase, TEFC, D132SD Frame
€2,617.43 /unit