BALDOR MOTOR EGDM3218T Grain Dryer Motor, 230/460V, 1800 RPM, 60 Hz, 5 hp, 3 Phase, ODP, 184TZ Frame
Get it by Tuesday, Jul 7
€1,732.67 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Farm Duty Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 14A @ 208V, 13.2A @ 230V, 6.6A @ 460V |
| Amps @ Voltage | 14A @ 208V, 13.2A @ 230V, 6.6A @ 460V , 6.6A @ 460V, 14A @ 208V, 13.2A @ 230V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Conduit Box Material | Steel |
| Conduit Box Position | F1 |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 89.5% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | OPSB |
| Feedback Device | NO FEEDBACK |
| Frame | 184TZ |
| Frame Material | Steel |
| Frame Size | 184TZ |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 6.6A |
| Grease Temp. | -20°F to +300°F |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 6.6A |
| Hp | 5 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | J |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 16 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Rigid Base |
| Motor Type | 3640M |
| Mounting Type | Rigid Base |
| Nameplate Speed | 1750 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output Frequency | 5 hp @ 60 Hz |
| Overall Length | 17 1/2" |
| Phase | 3 |
| Power Factor | 80 |
| Product Datasheet | baldor-motor-egdm3218t.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | Included |
| Service Factor | 1.15 |
| Shaft Dia. | 1 1/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1700-1800 RPM , 1750 RPM |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Speed | 1800 RPM |
| Synchronous Speed @ Hz | 1800 RPM @ 60 Hz |
| Thermal Device-winding | Normally Closed Thermostat |
| Thermal Protection | Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 208-230/460V |
| Voltage @ Frequency | 208V @ 60 Hz, 230V @ 60 Hz, 460V @ 60 Hz |
| Winding Thermal 2 | None |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 41.4 |
| Ship height (cm) | 38.42 |
| Ship length (cm) | 54.93 |
| Ship width (cm) | 40.96 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - GDM3218T
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 89.50%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: J
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: No Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 16 AWG
- Product Family: General Purpose
- Pulley End Bearing Type: Sealed Bearing
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 1.125 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
Documentation:
Product Variants
| Model | Voltage | Hp | Frame | Overall Length | Motor Type | Power Factor | Phase | Thermal Protection | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| EGDM2513T | 208-230/460V | 15 hp | 254TZ | 24.19" | 3938M | 83 | 3 | Thermostat | €4,165.46 | |
| EGDM2515T | 230/460V | 20 hp | 254TZ | 24.19" | 3948M | 85 | 3 | Thermostat | €4,821.47 | |
| EGDM2531T | 230/460V | 25 hp | 284TZ | 26.06" | 4050M | 82 | 3 | Thermostat | €5,960.89 | |
| EGDM2535T | 230/460V | 30 hp | 284TZ | 27.06" | 4060M | 80 | 3 | Thermostat | €6,668.87 | |
| EGDM3311T | 208-230/460V | 7 1/2 hp | 213TZ | 17.32" | 3734M | 79 | 3 | Thermostat | €2,539.68 | |
| EGDM3313T | 208-230/460V | 10 hp | 215TZ | 18.45" | 3742M | 82 | 3 | Thermostat | €3,009.37 |
Explore Products
- CLIMAX METAL PRODUCTS H2C-112 Clamping Collar, 1 1/8 Inch Bore, 2 1/8 Inch O.D, 1/2 Inch Width, Steel, Recessed Screw, Two Pcs
- APPLETON ELECTRIC ST90125L Liquid Tight Connector, Flexible, 1-1/4 Inch Size
- GRAINGER BULK-RS-N60-989 Neoprene Roll, 36 Inch X 15 Ft, 0.75 Inch Thickness, 60A, Plain Backing, Black, Smooth
- ZURN Z6950-XL-S-E Mid Arc, Motion Sensor Faucet Activation, 1.5 Gpm
- GEARENCH HTS78
- GRAINGER 17684_72_0 Stainless Steel Flat Bar, 303, 0.125 Inch Thick, 1/2 Inch X 6 Ft Size, Cold Finished, Mill
- GATES 5M1030 Belt, 40.55 Inch Length, 0.118 Inch Thickness
- MASTERDRIVES 3020-1.5/8 Taper Lock Bushing, 1 5/8 Inch Size
Explore More
- KEYSHAFT
- Stack and Nest Containers
- Engravers
- Welding Gun Adapters
- Firestop Sealants Caulks and Putties
- Hose Safety Cables
- ALLPAX GASKET CUTTER SYSTEMS Bottom Shaft Rebuild Kits
- ANSELL 97-505 Activarmr Cut Resistant Gloves
- ANSELL 87-224 Alphatec Neoprene Natura Latex Chemical Resistant Gloves
- IRONCLAD Super Duty Abrasion Impact Gloves
- HARVEL CLEAR PVC Male Adapters
- APPROVED VENDOR Double Sanitary Tee
- BRADY Clip On Badges
- TEMPO COMMUNICATIONS Milwaukee Hand Tool Parts
- APPROVED VENDOR Socket Head Cap Screws
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR EGDM3218T Grain Dryer Motor, 230/460V, 1800 RPM, 60 Hz, 5 hp, 3 Phase, ODP, 184TZ Frame
€1,732.67 /unit