BALDOR MOTOR EGDM2513T Grain Dryer Motor, 230/460V, 1800 RPM, 60 Hz, 15 hp, 3 Phase, ODP, 254TZ Frame
Get it by Tuesday, Dec 23
€4,165.46 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Farm Duty Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 38A @ 208V, 36A @ 230V, 18A @ 460V |
| Amps @ Voltage | 17.7A @ 460V, 35.4A @ 230V, 37.4A @ 208V |
| Amps @ Volts | 38A @ 208V, 36A @ 230V, 18A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 141 lbs.-ft. |
| Conduit Box Material | Steel |
| Conduit Box Position | F1 |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 93% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | OPSB |
| Feedback Device | NO FEEDBACK |
| Frame | 254TZ |
| Frame Material | Steel |
| Frame Size | 254TZ |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 18A |
| Full Load Torque | 0 lbs.-ft. |
| Full Load Torque | 0 ft.-lbs. |
| Grease Temp. | -20°F to +300°F |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 17.7A |
| Hp | 15 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | G |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 12 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Rigid Base |
| Motor Type | 3938M |
| Mounting Type | Rigid Base |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 15 hp @ 60 Hz |
| Overall Length | 24.19" |
| Phase | 3 |
| Power Factor | 83 |
| Product Datasheet | baldor-motor-egdm2513t.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | Included |
| Rpm | 1765 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Thermal Device - Winding | Normally Closed Thermostat |
| Thermal Protection | Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 208-230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 107.1 |
| Ship height (cm) | 48.26 |
| Ship length (cm) | 73.66 |
| Ship width (cm) | 53.34 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - GDM2513T
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 93.00%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: G
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: No Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 10 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 60.4 LB-FT
- Pulley End Bearing Type: Sealed Bearing
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 1.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 117 A
- Temp. Rise @ Rated Load: 26 deg C
- Temp. Rise @ S.F. Load: 32 deg C
Documentation:
Product Variants
| Model | Voltage | Hp | Frame | Nameplate Rpm | Overall Length | Motor Type | Power Factor | Break-down Torque | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| EGDM2515T | 230/460V | 20 hp | 254TZ | - | 24.19" | 3948M | 85 | 187 lbs.-ft. | €4,821.47 | |
| EGDM2531T | 230/460V | 25 hp | 284TZ | 1770 RPM | 26.06" | 4050M | 82 | 216 lbs.-ft. | €5,960.89 | |
| EGDM2535T | 230/460V | 30 hp | 284TZ | 1775 RPM | 27.06" | 4060M | 80 | 280 lbs.-ft. | €6,668.87 | |
| EGDM3218T | 208-230/460V | 5 hp | 184TZ | 1750 RPM | 17 1/2" | 3640M | 80 | - | €1,732.67 | |
| EGDM3311T | 208-230/460V | 7 1/2 hp | 213TZ | 1770 RPM | 17.32" | 3734M | 79 | 77.6 lbs.-ft. | €2,539.68 | |
| EGDM3313T | 208-230/460V | 10 hp | 215TZ | 1770 RPM | 18.45" | 3742M | 82 | 87.58 lbs.-ft. | €3,009.37 |
Explore Products
- GROVE GEAR NH8240508.16 NH-H824-40-H1-16 Solid Input Shaft Worm Gear Reducer, Hollow Bore Output Worm Gear
- BUSSMANN 170M3161 Specialty Fuse, High Speed, 690VAC, 80A, Square Body Blade Fuse
- MONARCH P5-11 Sensor Proximity
- BISHOP-WISECARVER T2726325 Single Edge Track Drilled, Size 2, Carbon Steel, Hardened, 7263 Inch Long, 25 Holes
- NEW AGE 1206 Mobile Dunnage Rack 1200 Lb.
- APPROVED VENDOR U24212.012.0125 Machine Screw, 5-40 Thread Size, Steel, 1 1/4 In Lg., Std
- IPS BOSS-819-3 Boss Intum Firestop Pipe, 3 Inch Size
- METROVAC 103I-517092
Explore More
- FLINT & WALLING
- KEYSHAFT
- TREGASKISS
- HARRINGTON AWG
- UNITED SALES
- PAPR
- Recessed Troffer Fixtures
- Micrometer Sets
- Oil Removal Filters
- Short Shank Couplings
- AUTOQUIP Hydraulic Freight Lifts
- ALLPAX GASKET CUTTER SYSTEMS Metric Hollow Punch Kits
- MUELLER INDUSTRIES 11M Iron Body Y Strainers
- ANVIL AS689 Series Adjustable Corner Connectors, Double Slotted
- GLOBE SCIENTIFIC Diamond RealSeal PETG Square Media Bottles
- BUSSMANN TPB Series Specialty Fuses
- TB WOODS Dura-Flex Metric Elements
- INSIZE Base Plates
- FUNCTIONAL DEVICES INC / RIB RIBXK Series Current Switches
- NIBCO 4801-2-F Series Flush Bushings, Spg x H, PVC DWV
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR EGDM2513T Grain Dryer Motor, 230/460V, 1800 RPM, 60 Hz, 15 hp, 3 Phase, ODP, 254TZ Frame
€4,165.46 /unit