BALDOR MOTOR EGDM2531T Grain Dryer Motor, 230/460V, 1800 RPM, 60 Hz, 25 hp, 3 Phase, ODP, 284TZ Frame
Get it by Monday, Dec 22
€5,960.89 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Farm Duty Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 64A @ 208V, 60A @ 230V, 30A @ 460V |
| Amps @ Voltage | 30A @ 460V, 60A @ 230V, 64A @ 208V |
| Amps @ Volts | 64A @ 208V, 60A @ 230V, 30A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 216 lbs.-ft. |
| Conduit Box Material | Steel |
| Conduit Box Position | F1 |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 93.6% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | OPSB |
| Feedback Device | NO FEEDBACK |
| Frame | 284TZ |
| Frame Material | Steel |
| Frame Size | 284TZ |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 30A |
| Full Load Torque | 0 ft.-lbs. |
| Full Load Torque | 0 lbs.-ft. |
| Grease Temp. | -20°F to +300°F |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 30A |
| Hp | 25 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | G |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 10 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Rigid Base |
| Motor Type | 4050M |
| Mounting Type | Rigid Base |
| Nameplate Rpm | 1770 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 25 hp @ 60 Hz |
| Overall Length | 26.06" |
| Phase | 3 |
| Power Factor | 82 |
| Product Datasheet | baldor-motor-egdm2531t.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | Included |
| Rpm | 1770 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1 7/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Thermal Device - Winding | Normally Closed Thermostat |
| Thermal Protection | Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 230V @ 60 Hz, 460V @ 60 Hz |
Shipping Info:
| Ship weight (kg) | 147.6 |
| Ship height (cm) | 54.61 |
| Ship length (cm) | 83.82 |
| Ship width (cm) | 59.69 |
| HS code | 85015230 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - GDM2531T
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 93.60%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: G
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: No Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 10 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 88.8 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 1.875 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 190 A
- Temp. Rise @ Rated Load: 28 deg C
- Temp. Rise @ S.F. Load: 34 deg C
Documentation:
Product Variants
| Model | Voltage | Hp | Frame | Nameplate Rpm | Overall Length | Motor Type | Power Factor | Break-down Torque | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| EGDM2513T | 208-230/460V | 15 hp | 254TZ | - | 24.19" | 3938M | 83 | 141 lbs.-ft. | €4,165.46 | |
| EGDM2515T | 230/460V | 20 hp | 254TZ | - | 24.19" | 3948M | 85 | 187 lbs.-ft. | €4,821.47 | |
| EGDM2535T | 230/460V | 30 hp | 284TZ | 1775 RPM | 27.06" | 4060M | 80 | 280 lbs.-ft. | €6,668.87 | |
| EGDM3218T | 208-230/460V | 5 hp | 184TZ | 1750 RPM | 17 1/2" | 3640M | 80 | - | €1,732.67 | |
| EGDM3311T | 208-230/460V | 7 1/2 hp | 213TZ | 1770 RPM | 17.32" | 3734M | 79 | 77.6 lbs.-ft. | €2,539.68 | |
| EGDM3313T | 208-230/460V | 10 hp | 215TZ | 1770 RPM | 18.45" | 3742M | 82 | 87.58 lbs.-ft. | €3,009.37 |
Explore Products
- OSG 52800005 Indexable Face Mill, 6.4010 Inch Max. Cutting Dia, 1.5000 Inch Arbor Dia
- HOLO-KROME 60138 81367 Alloy, Flat Head Cap Screw, 1/2-13 x 2-1/2 Size
- REGAL 090156PS Thread Plug Gage, #2-64 UNF, Not Go Member 3B, Bright
- SMC VALVES AC20-N02E-CZ-B Modular, 1/4 Inch Size, N Port
- VOLKEL 36180 Machine Tap, Red Ring, DIN 371/C-R15HSSE-PM-TiALN, M 10 x 1.5 Size
- KEYSHAFT 3/8 GKS-2024-12 Keyed Shaft, 3/8 Inch Dia., 12 Inch Length, Aluminium
- LUMAPRO 15S14/IFBB 34V Incandescent Light Bulb S14 15w
- LEVITON TBR20-W Receptacle, Duplex, 5-20R, 20 A, 125V AC, White, 2 Poles, Screw Terminals
Explore More
- DIAMOND VANTAGE
- KEYSHAFT
- TEST PRODUCTS INTL.
- METZ CONNECT
- MTS SAFETY
- Ear Clamps
- Abrasive Wheel Adapters
- Dual Pressure Controls
- Floor Coating Spiked Shoes
- Pneumatic Tubing
- NIROFLEX USA Niroflex2000 Cut Resistant Gloves, 6 Inch Extended Cuff
- ACME ELECTRIC WI001 Series Medium Voltage Transformers, 3 Phase, 60Hz, 2.5kV & 5kV Class
- ASSOCIATED SPRING RAYMOND Powerline X9500 Gas Springs
- KEO Combined Drills And Countersinks, Plain Type, 60 Degrees Countersink Angle, T15 High Speed Steel
- TESA BROWN SHARPE Dial Indicator
- IGUS Slewing Ring Bearing
- ADVANCE TABCO Pass-Thru Shelf
- SPEARS VALVES PVC Class 100 IPS Fabricated Fitting 60 Deg. Elbows, Socket x Socket
- REGAL Taper Hand Taps, HSS, Alcrona
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR EGDM2531T Grain Dryer Motor, 230/460V, 1800 RPM, 60 Hz, 25 hp, 3 Phase, ODP, 284TZ Frame
€5,960.89 /unit