BALDOR MOTOR CNEDM3554T Dirty Duty Plus Motor, 230/460V, 1800 RPM, 60 Hz, 1.5 hp, TENV, 145TC Frame
2.1A
Get it by Thursday, Dec 18
€1,709.03 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Severe Duty Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Voltage | 2.1A @ 460V, 4.2A @ 230V |
| Amps @ Volts | 4.2A @ 230V, 2.1A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Conduit Box Material | Steel |
| Conduit Box Position | F1 |
| Constant Torque Speed Range | 6 |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 86.5% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TENV |
| Feedback Device | NO FEEDBACK |
| Frame | 145TC |
| Frame Material | Steel |
| Frame Size | 145TC |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 4.2A @ 230V, 2.1A @ 460V |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 2.1A |
| Hp | 1 1/2 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Duty |
| Kva Code | K |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max. Rpm | 2700 RPM |
| Motor Enclosure Design | Totally Enclosed Non Ventilated |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 18 AWG |
| Motor Lead Termination | Ring Terminals |
| Motor Type | 3534M |
| Nameplate Rpm | 1755 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 1 1/2 hp @ 60 Hz |
| Overall Length | 13" |
| Phase | 3 |
| Power Factor | 72 |
| Product Datasheet | baldor-motor-cnedm3554t.pdf |
| Product Family | Dirty Duty Plus |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | C Face |
| Pulley Shaft Indicator | Standard |
| Rpm | 1755 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 7/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 21.6 |
| Ship height (cm) | 33.33 |
| Ship length (cm) | 49.21 |
| Ship width (cm) | 34.93 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- Constant Torque Speed Range: 6
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 86.50%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: K
- Lifting Lugs: No Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 18 AWG
- Product Family: DIRTY DUTY PLUS
- Pulley End Bearing Type: Sealed Bearing
- Pulley Face Code: C-Face
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 0.875 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
Documentation:
Product Variants
| Model | Nameplate Rpm | Hp | Motor Type | Service Factor | Mounting Type | Shaft Dia. | Overall Length | Rpm Range | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| CDM3538 | 1725 RPM | 1/2 hp | 3420M | 1.25 | C Face, Foot Mounted | 5/8" | 11.35" | 1700-1800 RPM | €1,021.64 | |
| CDM3539 | 1140 RPM | 1/2 hp | 3428M | 1.25 | - | 5/8" | 12.85" | 1100-1200 RPM | €1,325.15 | |
| CDM3543 | 1160 RPM | 3/4 hp | 3518M | 1.15 | C Face, Foot Mounted | 5/8" | 13.23" | 1100-1200 RPM | €1,344.01 | |
| CEDM3545 | 3450 RPM | 1 hp | 3516M | 1.25 | C Face, Foot Mounted | 5/8" | 12.23" | 3400-3600 RPM | €1,414.42 | |
| CEDM3546 | 1760 RPM | 1 hp | 3520M | 1.15 | - | 5/8" | 12.23" | 1700-1800 RPM | €1,565.19 | |
| CEDM3550 | 3500 RPM | 1 1/2 hp | 3520M | 1.15 | - | 5/8" | 12.23" | 3400-3600 RPM | €1,546.35 | |
| CEDM3554 | 1760 RPM | 1 1/2 hp | 3526M | 1.15 | C Face, Foot Mounted | 5/8" | 13.23" | 1700-1800 RPM | €1,693.16 |
Explore Products
- EATON FD2100KLA05 Molded Case Switch, F-Frame, Fd Type, 2-Pole, 100A, 600 Vac, 250 Vdc, Line And Load
- WALTER TOOLS DB130-05-00.780U0-WJ30UU 7233461 Micro Drill Bit, 0.78 mm Drill Bit Size, 3/16 Inch Flute Length, 1 mm Shank Dia, Carbide
- QORPAK GLA-00815 Bottle Narrow Mouth 8 Ounce Clear
- LABCONCO 130800002 Protector Hood 115V 31-11/16 Inch Depth
- SPEC E02400314000M Extension Spring, Music Wire, 4 Inch Overall Length, 0.24 Inch Outside Dia
- PARKER PJTF-40-SIE-G1
- SINGER SAFETY 23000105 Vibration Compound 5-Gallon
- MAIN FILTER INC. MF0582789 169601RH20XLF000V Interchange Hydraulic Filter, Glass, 25 Micron, Viton Seal, 4.64 Inch Height
Explore More
- ICM
- KEYSHAFT
- WOODS
- KETT TOOLS
- GRAPHIC CONTROLS
- Drum Pump Tubes
- Electrical Glove Accessories
- Shrink Tubing
- Vacuum and Pressure Relief Valves
- Ultrasonic Flow Meter Detector Accessories
- ML KISHIGO Economy Rainwear Set, Orange
- FACOM 126A Hinged Hook And Pin Wrenches
- JOHN GUEST Metric Swivel Male Elbows, BSPP Thread, Acetal Black
- SPEARS VALVES PVC Schedule 40 DWV Fabricated Fitting DWV Sanitary Tees, Socket x Socket x Socket
- MARTIN SPROCKET Triple Stock Bore C Type Roller Chain Sprockets, 60 Chain Number
- NORTON ABRASIVES BlueFire ZA ZA Chop Saw Cut-Off Wheels, Type 01/41
- ZSI-FOSTER HAC3 Series Z Clamp Standard Assemblies, 3 Inch Size
- HUB CITY HERA45 Series Helical Hypoid Reducers, AS Type, Cast Iron
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR CNEDM3554T Dirty Duty Plus Motor, 230/460V, 1800 RPM, 60 Hz, 1.5 hp, TENV, 145TC Frame
€1,709.03 /unit