BALDOR MOTOR CEDM3710T Dirty Duty Plus Motor, 230/460V, 1800 RPM, 60 Hz, 7.5 hp, TEFC, 213TC Frame
9.5A
Get it by Wednesday, Dec 17
€2,993.50 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Severe Duty Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Voltage | 19A @ 230V, 20A @ 208V, 9.5A @ 460V |
| Amps @ Volts | 20A @ 208V, 19A @ 230V, 9.5A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 70.9 lbs.-ft. |
| Conduit Box Material | Steel |
| Conduit Box Position | F1 |
| Constant Torque Speed Range | 6 |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 91.7% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame Material | Steel |
| Frame Size | 213TC |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 20A @ 208V, 19A @ 230V, 9.5A @ 460V |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 9.5A |
| Hp | 7 1/2 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | J |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max. Rpm | 2700 RPM |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 14 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3738M |
| Mounting Type | C Face, Foot Mounted |
| Nameplate Rpm | 1770 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 7 1/2 hp @ 60 Hz |
| Overall Length | 19.76" |
| Phase | 3 |
| Power Factor | 80 |
| Product Datasheet | baldor-motor-cedm3710t.pdf |
| Product Family | Dirty Duty Plus |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | C Face |
| Pulley Shaft Indicator | Standard |
| Rpm | 1770 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1 3/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 65.7 |
| Ship height (cm) | 44.13 |
| Ship length (cm) | 66.99 |
| Ship width (cm) | 41.91 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - CEWAM3710T
- Constant Torque Speed Range: 6
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 91.70%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: J
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 14 AWG
- No-Load Current: 0 A
- Product Family: DIRTY DUTY PLUS
- Pull-Up Torque: 32.6 LB-FT
- Pulley End Bearing Type: Sealed Bearing
- Pulley Face Code: C-Face
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 1.375 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 70.9 A
- Temp. Rise @ Rated Load: 63 deg C
- Temp. Rise @ S.F. Load: 78 deg C
Documentation:
Product Variants
| Model | Nameplate Rpm | Hp | Motor Type | Service Factor | Mounting Type | Shaft Dia. | Overall Length | Rpm Range | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| CDM3538 | 1725 RPM | 1/2 hp | 3420M | 1.25 | C Face, Foot Mounted | 5/8" | 11.35" | 1700-1800 RPM | €1,021.64 | |
| CDM3539 | 1140 RPM | 1/2 hp | 3428M | 1.25 | - | 5/8" | 12.85" | 1100-1200 RPM | €1,325.15 | |
| CDM3543 | 1160 RPM | 3/4 hp | 3518M | 1.15 | C Face, Foot Mounted | 5/8" | 13.23" | 1100-1200 RPM | €1,344.01 | |
| CEDM3545 | 3450 RPM | 1 hp | 3516M | 1.25 | C Face, Foot Mounted | 5/8" | 12.23" | 3400-3600 RPM | €1,414.42 | |
| CEDM3546 | 1760 RPM | 1 hp | 3520M | 1.15 | - | 5/8" | 12.23" | 1700-1800 RPM | €1,565.19 | |
| CEDM3550 | 3500 RPM | 1 1/2 hp | 3520M | 1.15 | - | 5/8" | 12.23" | 3400-3600 RPM | €1,546.35 | |
| CEDM3554 | 1760 RPM | 1 1/2 hp | 3526M | 1.15 | C Face, Foot Mounted | 5/8" | 13.23" | 1700-1800 RPM | €1,693.16 |
Explore Products
- RAYMOND PRODUCTS 2000-46 Desk Mover 600 Lb. 16 Inch D
- CENTURY BN50V1 Pump Motor Capacitor Start 1.5 Hp 3450 115v 48y Odp
- SCIENTIFIC CUTTING TOOLS BQ360600A 218311 Qualified Boring Bar, Solid Carbide Altin, Ma x Depth 0.6 x 0.375 Shank Dia
- ANVIL 0500555537 Fabricated Tees With End Plate, 18 Inch Size, Hot Dipped Galvanized Finish
- GRAINGER ZUSAB-PB-404 Sleeve Bearing, 18 mm Bore, 20 mm Od, 12 mm Length
- MAIN FILTER INC. MF0306375 Interchange Hydraulic Filter, Glass, 25 Micron Rating, Viton Seal, 8.14 Inch Height
- MICRO 100 HBB-2101250 Boring Bar, 0.105 Inch Centerline Offset, 0.1975 Inch Head Width, 0.185 Inch Neck Dia.
- DBI-SALA 1102833 Harness, 2Xl
Explore More
- BASCO
- DAYTON
- HUSQVARNA
- KEYSHAFT
- FLUORAMICS
- Heat Guns
- Direct Drive Double Inlet Fwd Curve Blowers w/Dr Pkg
- Thread Mills
- Firestop Pillows Sheets and Wraps
- Magnetic Starters with Thermal Overload
- ALLPAX GASKET CUTTER SYSTEMS Metric Hollow Punch Kits
- TEMPCO PCT-2000 Series Temperature Controls
- MUELLER INDUSTRIES 125CI-N Iron Body Simplex Basket Strainers
- SPEARS VALVES Labwaste CPVC P331 Vent Elbows, Hub x Hub
- EATON Type 1 General Purpose Magnetic Motor Starters
- DAYTON Square Keys
- NIBCO True Union Ball Check Valves
- WHEATON 525 Organo/530 Solutae Calibrex Bottle Top Dispensers
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR CEDM3710T Dirty Duty Plus Motor, 230/460V, 1800 RPM, 60 Hz, 7.5 hp, TEFC, 213TC Frame
€2,993.50 /unit