AURAND MP6 Air Powered Scarifier, 8 Inch Cleaning Area, 3/4 Inch Inlet Size, D Handle

Uses:

Aurand MP6 air powered sacrifier is suitable for removing rust, paint and adhesives from steel, asphalt and concrete surfaces. This heavy duty surface preparation tool is designed for working on beams, girders, large pipes, valves, tanks, oil platforms, barge & ship decks, marine towing equipment and bridges. Additionally, structures like swimming pools, retaining walls, parking lot lines and cement smatterings can also be cleaned / processed using this air scarifier.

Features:

• Rotary Style Motor: This pneumatic powered tool features a rotary style motor without any pistons, toggles or reciprocating parts for eliminating unwanted vibrations from the tool.
• Detachable Aluminium Handle: Aurand MP6 air powered sacrifier comes with a detachable aluminium handle for operating the tool with ease and speed over large, flat areas.
• Trigger Style Switch: The trigger style switch enables quick throttle activation and deactivation.
• Variable Speed Setting: Aurand MP6 air powered sacrifier's variable speed setting allows the user to adjust the blade speed according to the application requirement.

Compatible Accessories:

• Aurand MP6 replacement wire brush: Aurand 23W replacement wire brush is used to replace a worn out wire brush on Aurand MP6 scarifier. This wire brush, in conjunction with the air scarifier, digs into surfaces to remove cement overlays, thick epoxies, paint, rust and coatings from metallic, concrete and wooden surfaces. This wire brush can be easily replaced & installed by unscrewing a few bolts.

Installation:

Aurand MP6 air powered sacrifier operates using compressed air. The user should connect a 3/8 inch diameter hose supply line to the sacrifier. This air powered sacrifier is trigger operated and does not require any additional set up. Before operating, the user should lift the cutter using both handles located at the top & rear of the air powered sacrifier. Additionally, the depth of the cutting blade can be easily adjusted just by loosening / fastening the screw located on the cutter blade.

Frequently Asked Questions:

Q. What safety instructions should be followed before operating Aurand scarifier?

A.

• The compressed air line should be free of dirt & moisture before connecting to the air scarifier.
• A hose having a minimum diameter of 3/8 inches should be connected to the air supply intake port of the scarifier.
• Safety glasses & hearing protection should be worn while operating the air scarifier.
• The tool should be securely gripped using both handles located at the top and back of the air scarifier.
• Never apply pressure while operating the tool, as it may damage the cutter bundles, motor & gear of the air scarifier.

Q. What is the purpose of surface preparation?

A. Tools like Aurand MP6 air scarifier are used to clean surfaces. This cleaning is done to apply chemicals on the cleaned surface for promoting bonding between the adhesive and the surface.

Q. Why is this tool ideal for surface preparation?

A. This Aurand scarifier comes with an adjustable depth shoe which maintains uniformity during the cleaning operation. Once placed properly, it can reduce operator fatigue by allowing te operator to exert minimal effort to finish the surface preparation task.

Q. How long do cutter bundles last?

A. A set of cutter bundles can last for 20 to 40 hours and can prepare about 1000 sq.ft surface. You can replace blunt cutter bundles with an Aurand 90M cutter bundle.

Q. What types of handles are offered with air powered sacrificer?

A. Aurand air powered sacrificers are offered in straight and D handle variants for ease of operation.

Q. What are the safety precautions to consider while using Aurand MP6 air powered scarifier?

A. Always wear appropriate personal protective equipment (PPE), including safety goggles, ear protection, dust masks and gloves. Ensure the work area is well-ventilated and follow all safety guidelines provided in the operator's manual.

Q. How to maintain this Aurand deck scaler scarifier?

A. Regular maintenance includes cleaning the scarifier after each use, checking for worn or damaged cutters and replacing them as needed. Regular oiling of the air motor and storage in a dry environment is also recommended to prevent rust and corrosion.