WEG 35018EP3G449T-W22 11356435 General Purpose Motor, TEFC Cast Iron 447/9T Frame, 350 HP, 1780 RPM, 460 V
Get it by Tuesday, Aug 25
€41,626.63 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Altitude | 1000 M.A.S.L. |
| Ambient Temp. | -20°C to +40°C |
| Amps | 396A |
| Balancing Method | 1/2 Key |
| Bearing Cap | Yes |
| Break Down Torque | 220% |
| Cable Press Material | Sem |
| Cold Locked Rotor Time | 28 sec. |
| Composition | Cast Iron |
| Connection Cables Quantity | 12 |
| De Bearing Seal | Yes |
| Degree Of Protection | IP55 |
| Design | B |
| Drain | Rubber, Automatic |
| Drip Cover | Without |
| Duty Cycle | S1 |
| Efficiency | 50% |
| Efficiency 50% | 95.4% |
| Efficiency 75% | 95.8% |
| Efficiency @ 100% | 95.8% |
| Enclosure | IC411 |
| Enclosure Rating | IC411 |
| Enclosure Type | Tefc |
| Fan Cover Material | Cast Iron |
| Fan Material | Plastic |
| Flange | Without |
| Flange Type | Without |
| Frame | 447/9T |
| Frame Material | Cast Iron |
| Frequency | 60 Hz |
| Full Load Amps | 396A |
| Grade | Grade 1010/20 |
| Grounding Lugs | Double |
| Grounding Lugs Type | Double |
| Hp | 350 hp |
| Impregnation Method | Constant Resin Flow |
| Insulation Class | Class F |
| L. R. Amps | 2534A |
| Locked Rotor Time (cold) | 28 sec. |
| Locked Rotor Time(hot) | 16 sec. |
| Locked Rotor Torque | 210% |
| Lrc | 6.4x(Code G) |
| Main Terminal Box Hole | 2" |
| Main Terminal Box Type | NPT |
| Material | Carbon Steel |
| Moment Of Inertia (j) | 118 lbs.-sq. ft. |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Mounting | F-1 , Foot Mounted |
| Nde Bearing Seal | Yes |
| No Load Amps | 98A |
| No. Of Poles | 4 |
| Noise | 75 dBA |
| Noise Level | 75 dBA |
| Output Rating | 350 hp |
| Overload Protection | No |
| Overload Protector (phenolic) | Without Overload Protector |
| Painting | Only Primer |
| Phase | 3 |
| Power Factor | 75% |
| Power Factor 100% | 0.86 |
| Power Factor 50% | 0.76 |
| Power Factor 75% | 0.84 |
| Regreasing System | At Drive End And Non-Drive End |
| Rotation | CW, CCW |
| Screw Cap | Carbon Steel |
| Service Factor | 1.15 |
| Shaft Locking Device | Without |
| Shaft Material | Carbon Steel |
| Slip | 1.11% |
| Speed | 1780 RPM |
| Starting Method | Direct On Line |
| Synchronous Speed | 1800 RPM |
| Temp. Rise | 80 K |
| Terminal Block | Without |
| Terminal Box | Left Position |
| Torque | 1019 lbs.-ft. |
| Tropicalized Painting | Without |
| Voltage | 460V , 460V AC |
Shipping Info:
| Ship weight (kg) | 1499.85 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Product Variants
| Product | Model | Voltage | Frame | Ambient Temp. | Frame Material | No Load Amps | Mounting | Output Rating | Grounding Lugs | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
.7518ET3J56-S | 380/660V AC | 56 | -20°C to +50°C | Rolled Steel | 0.995/0.573A | Foot Mounted | 3/4 hp | Single | €470.06 | RFQ
|
|
00118ET3J56-S | 380/660V AC | 56 | -20°C to +50°C | Rolled Steel | 1.08/0.62A | Foot Mounted | 1 hp | Single | €489.16 | RFQ
|
 |
00158ET3J56-S | 380/660V AC | 56H | -20°C to +50°C | Rolled Steel | 1.31/0.754A | Foot Mounted | 1 1/2 hp | Single | €560.75 | RFQ
|
 |
00218ET3J145T-S | 380/660V AC | 143/5T | -20°C to +50°C | Rolled Steel | 1.69/0.974A | Foot Mounted | 2 hp | Single | €687.22 | RFQ
|
 |
00318ET3J182T-S | 380V | 182/4T | -20°C to +40°C | Rolled Steel | 2.42A | Foot Mounted | 3 hp | Single | €744.48 | RFQ
|
|
00518ET3J184T-S | 380V | 182/4T | -20°C to +40°C | Rolled Steel | 4.17A | Foot Mounted | 5 hp | Single | €866.18 | RFQ
|
 |
00718ET3J213T-S | 380V | 213/5T | -20°C to +40°C | Rolled Steel | 5.33A | Foot Mounted | 7 1/2 hp | Single | €1,221.70 | RFQ
|
Explore Products
- SMC VALVES NCDA1D325-1400-A54S Tie Rod Cylinder, 1.5 To 4 Inch Bore Range
- SMC VALVES VFS4400-6FZ-04T Solenoid Valve, 4/5 Port
- BOSTON GEAR 10304 Spur Gear, Pressure Angle 14.5 Degree
- GROVE GEAR GR8240562.18 GR-HMQ824-7.5-H1-140-18 Right Angle Gear Reducer, 7.5 to 1 Ratio, 1-1/8 Inch Hollow Bore, 143-5TC NEMA Input, Cast Iron
- A.R. NORTH AMERICA ar42764 Head, Partial Assy RMW
- REGAL 052253JM85 Cobalt End Mill With TiCN Coated, 7/32 Inch Dia., 3-1/4 Inch Length, 4 Flutes
- ECEF 541300 Drill, 13.00mm, Gold Black, High Speed Steel
- 3M 7100043753
Explore More
- AMERI-VENT
- KEYSHAFT
- TRAXION
- WILLIAMS INDUSTRIAL TOOLS
- HARPSTER TARPS
- Fork Terminals
- Audio-Video Splitters Connectors and Adapters
- Pneumatic Strapping Sealers and Tensioners
- Wet Location Fluorescent Fixtures
- Boiler Controls
- ANSELL 27-607 Activarmr Heavy Duty Nitrile Coated Safety Gloves
- FALLTECH Hot Work Full Body Harnesses, With Pad
- CONDOR Coated Gloves, Full Finger, Nitrile Coating, Palm Dipped
- H.K. PORTER Center Cut Cutters, Industrial Grade
- GLOBE SCIENTIFIC Vacuum Bottles, Polypropylene
- SPEARS VALVES CPVC True Lug Valve Overhaul Kits, Buna-N
- GROVE GEAR Quill Input Inline Helical Reducers, R827 Size
- ACME ELECTRIC Covers
- SIOUX CHIEF TrimTite Poly Escutcheons
- MACROMATIC THR-1 Series On/Off Delay Output Relays, 1 To 100 Sec. Time Range
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WEG 35018EP3G449T-W22 11356435 General Purpose Motor, TEFC Cast Iron 447/9T Frame, 350 HP, 1780 RPM, 460 V
€41,626.63 /unit