WEG 00158ET3J56-S 14826018 General Purpose Motor, 1.5 HP, 4 Poles, 56H Frame, 3 Phase, 380/660 V, 60 Hz, IC411-TEFC, Foot Mounted
€560.75 /unit
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Altitude | 1000 M.A.S.L. , 1000 MASL |
| Ambient Temp. | -20°C to +50°C |
| Amps | 1.41/2.45A , 2.45/1.41A |
| Balancing Method | 1/2" Key |
| Bearing Cap | No |
| Bolt Material | Carbon Steel |
| Break Down Torque | 300% |
| Cold Locked Rotor Time | 37 sec. |
| Connection Cables Quantity | 6 |
| Design | B |
| Drain | Rubber, Automatic |
| Drip Cover | Without |
| Duty Cycle | S1 |
| Efficiency 50% | 59% , 85.5% |
| Efficiency 75% | 86.5% |
| Efficiency @ 1 % | 79% |
| Efficiency @ 100% | 86.5% |
| Efficiency @ 75 % | 72% |
| Enclosure | IC411 |
| Enclosure Type | Tefc |
| Fan Cover Material | Polymer , Steel |
| Fan Material | Plastic |
| Flange | Without |
| Flange Type | Without |
| Frame | 56H |
| Frame Material | Rolled Steel |
| Frame Size | 56H |
| Frequency | 60 Hz |
| Grounding Lugs | Single |
| Hot Locked Rotor Time | 21 sec. |
| Impregnation Method | Dip And Bake Polyester |
| Insulation Class | Class F |
| L. R. Amps | 11.6/20.1A , 20.1/11.6A |
| Locked Rotor Time (cold) | 37 sec. |
| Locked Rotor Time(hot) | 21 sec. |
| Locked Rotor Torque | 270% |
| Lrc | 8.2X(Code K) |
| Main Terminal Box Hole | 0.881" |
| Main Terminal Box Hole Size | 0.881" |
| Moment Of Inertia | 0.1092 lbs.-sq. ft. |
| Moment Of Inertia (j) | 0.1092 lbs.-sq. ft. |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Speed | 1750 RPM |
| Mounting | F-1 , Foot Mounted |
| No Load Amps | 0.754/1.31A , 1.31/0.754A |
| No. Of Poles | 4 |
| Noise Level | 52 dBA |
| Output | 1 1/2 hp |
| Output Rating | 1 1/2 hp |
| Overload Protection | No |
| Painting | Only Primer |
| Phase | 3 |
| Power Factor 100% | 0.79 |
| Power Factor 50% | 0.59 |
| Power Factor 75% | 0.72 |
| Power Factor @ 1 % | 86.5 |
| Power Factor @ 50 % | 85.5 |
| Power Factor @ 75 % | 86.5 |
| Resilient Base | Without |
| Rotation | CW, CCW |
| Screw Cap | Carbon Steel |
| Service Factor | 1.15 |
| Shaft Material | Carbon Steel |
| Shaft Material Grade | Grade 1040/45 |
| Slip | 2.78% |
| Speed | 1700-1800 RPM , 1750 RPM |
| Starting Method | Direct On Line |
| Synchronous Speed | 1800 RPM |
| Temp. Rise | 70 K , 80 K |
| Terminal Block | Without |
| Terminal Box | Left Position |
| Torque | 4.5 lbs.-ft. |
| Tropicalized Painting | Without |
| Voltage | 380/660V , 380/660V AC |
Product Variants
| Product | Model | Voltage | Frame | Ambient Temp. | Frame Material | No Load Amps | Mounting | Output Rating | Grounding Lugs | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
35018EP3G449T-W22 | 460V AC | 447/9T | -20°C to +40°C | Cast Iron | 98A | Foot Mounted | 350 hp | Double | €41,626.63 | |
 |
.7518ET3J56-S | 380/660V AC | 56 | -20°C to +50°C | Rolled Steel | 0.995/0.573A | Foot Mounted | 3/4 hp | Single | €470.06 | RFQ
|
|
00118ET3J56-S | 380/660V AC | 56 | -20°C to +50°C | Rolled Steel | 1.08/0.62A | Foot Mounted | 1 hp | Single | €489.16 | RFQ
|
 |
00218ET3J145T-S | 380/660V AC | 143/5T | -20°C to +50°C | Rolled Steel | 1.69/0.974A | Foot Mounted | 2 hp | Single | €687.22 | RFQ
|
 |
00318ET3J182T-S | 380V | 182/4T | -20°C to +40°C | Rolled Steel | 2.42A | Foot Mounted | 3 hp | Single | €744.48 | RFQ
|
|
00518ET3J184T-S | 380V | 182/4T | -20°C to +40°C | Rolled Steel | 4.17A | Foot Mounted | 5 hp | Single | €866.18 | RFQ
|
 |
00718ET3J213T-S | 380V | 213/5T | -20°C to +40°C | Rolled Steel | 5.33A | Foot Mounted | 7 1/2 hp | Single | €1,221.70 | RFQ
|
Explore Products
- GATES XH-400-200-LLUK Synchronous & Timing Belt
- PARKER 1P4MA0052069 Pneumatic Cylinder
- EATON P3F325R Fusible Plug-In Unit, 3P, Class R, 240 VAC, 400A, 3 Wires
- NIBCO NLHA02M WD-L000 Butterfly Valve, 10 Inch Size, Wafer, Ductile Iron, 100 Psi, Pneumatic Actuator
- ADVANCE TABCO HB-SS-369M Work Table, 108 X 36 Inch Size Midshelf And Hinged Doors, 14 Ga 304 Ss Top
- SMC VALVES CDQ2A40-75DMZ-A96L Compact Cylinder, Double Acting, Single Rod, 40Mm Bore Size, 75 Mm Stroke Length
- TITAN FASTENERS KJA10048
- BOSTON GEAR 40b21-5/8
Explore More
- GRAYMILLS
- KEYSHAFT
- MASTER COOL
- PRESTO LIFTS
- GARDNER
- Stand Slip Rolls
- Cooling Filter Dryers
- Insulation Testers
- Antistatic Heel Ground Assembly
- Electrical Box Covers
- ALLPAX GASKET CUTTER SYSTEMS Metric Hollow Punch Kits
- JOHN GUEST Swivel Male Elbows, NPTF Thread, Acetal Gray
- VIBCO FBS Series Pneumatic Turbine Vibrators
- ASSOCIATED SPRING RAYMOND Powerline X2400 Gas Springs
- GLOBE SCIENTIFIC Label Sheets, Cryo, 38 x 6 mm Size
- ARMOR COAT 5/16"-18 Coarse Armor Coat Hex Head Cap Screws
- VESTIL TG-1200 Standard Overlap Wall Mount Vinyl Strip Doors
- GROVE GEAR NH Series, BM-R Style, 842 Size, Ironman Narrow Housing Worm Gear Reducers
- MILWAUKEE Riggers Style General Purpose Gloves
- NIBCO PC606-XLC Series 45 Deg Elbows, Prs x Prs, Wrot Copper
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WEG 00158ET3J56-S 14826018 General Purpose Motor, 1.5 HP, 4 Poles, 56H Frame, 3 Phase, 380/660 V, 60 Hz, IC411-TEFC, Foot Mounted
€560.75 /unit