WEG 01518OT3E254TF2-W40 14492592 General Purpose Motor, ODP Cast Iron 254T Frame, 10 HP, 1480 RPM, 415V, F-2 Mounting
Get it by Monday, Aug 24
€1,718.14 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | AC Motor |
| Altitude | 1000 m.a.s.l. |
| Ambient Temp. | -20°C to +40°C |
| Balancing Method | 1/2 Key |
| Bearing Cap | No , No Without Bearing Cap |
| Bolt Material | Carbon Steel |
| Break Down Torque | 2.6 , 360% |
| Cold Locked Rotor Time | 54 sec. |
| Connection Cables Quantity | 12 |
| De Bearing Seal | No |
| Degree Of Protection | IP23 |
| Design | B |
| Drip Cover | Without |
| Duty Cycle | Cont.(S1) |
| Efficiency 50% | 91.7% |
| Efficiency 75% | 92.4 |
| Efficiency @ 100% | 93% |
| Enclosure | IC01-ODP |
| Enclosure Rating | IC01 |
| Enclosure Type | Open Dripproof |
| Fan Cover Material | Without Fan Cover |
| Fan Material | Without Fan |
| Flange | Without |
| Frame | 254T |
| Frame Material | Cast Iron |
| Frequency | 50/60 Hz |
| Grade | Grade 1010/20 |
| Grounding Lugs Type | Single |
| Impregnation Method | Dip And Bake Polyester |
| Insulation Class | Class F, F |
| L. R. Amps | 103A , 224/112A |
| Locked Rotor Time(hot) | 30 sec. |
| Locked Rotor Torque | 2.2 , 310% |
| Lrc | 6.4 X (Code G) , 7x(Code J) |
| Main Terminal Box Hole | 1 1/2" , NPT 1 1/2" |
| Main Terminal Box Hole Type | NPT |
| Material | Carbon Steel |
| Moment Of Inertia | 2.72 lbs.-sq. ft. |
| Mounting | F-2 , Foot-Mounted, F-2 |
| Nde Bearing Seal | No |
| No Load Amps | 13.6/6.8A , 7.8A |
| No. Of Poles | 4 |
| Noise Level | 62 dBA |
| Output Rating | 15 Hp , 7.5 KW |
| Overload Protector (phenolic) | Without Overload Protector |
| Painting | Only Primer |
| Power Factor 100% | 0.85 |
| Power Factor 50 % | 0.66 |
| Power Factor 75 % | 0.78 |
| Product Datasheet | weg-01518ot3e254tf2-w40.pdf |
| Rated Amps | 14.7A , 35/17.5A |
| Rated Speed | 1480 RPM , 1775 RPM |
| Rated Torque | 35.5 lbs.-ft. , 44.4 lbs.-ft. |
| Rated Voltage | 230/460V , 415V |
| Regreasing System | At Drive End And Non-Drive End |
| Rotation | CW And CCW |
| Screw Cap | Carbon Steel Sae 1010/20 |
| Service Factor | 1 , 1.25 |
| Shaft Locking Device | Without |
| Shaft Material | SAE 1040/45 Carbon Steel |
| Slip | 1.33% , 1.39% |
| Starting Method | Direct On Line |
| Synchronous Speed | 1800 RPM |
| Temp. Rise | 80 K |
| Terminal Block | Without |
| Terminal Box | Right Position |
| Terminal Box1 | Right Position |
| Tropicalized Painting | Without |
| Voltage | 230/460/380V |
Shipping Info:
| Ship weight (kg) | 111.15 |
Documentation:
Explore Products
- SMC VALVES MXS12L-50B-X9 Cylinder, Air Slide Table, Symmetric Type
- TB WOODS 1930V691 Variable Speed Belt, 69.1 Inch Pitch Length
- LIQUIFLO 780020 Housing, Center
- TEKTON SHD23229 1/2 Inch Drive x 1-1/8 Inch Deep 12-Point Socket
- LISLE li35080 CABLE FOR BUTTON PLIERS
- DYNALON 202455-0100 Tamper Evident Bottle 100 Ml
- COOPER B-LINE 8848 G Wiring Trough, 48 x 8 x 8 Inch Size, Screw Covered, Steel, Gray
- KESON PG181033WIDEV Wide Tape Measure, With Nylon Coated Steel Wide Blade, 33 ft. Length
Explore More
- DRAGONLAB
- KEYSHAFT
- RUD CHAIN
- LOCKJAW
- REER
- Condiment Self-Serve Centers
- Extension Cord Storage Reel Accessories
- Hand Dryer Accessories
- Lug Compression Connectors
- Blind Rivets
- PLAST-O-MATIC EBVB Series Electrical Actuated Ball Valves
- ELVEX Full Magnifying Protective Eyewears
- MUELLER INDUSTRIES 792M Duplex Basket Strainers
- GLOBE SCIENTIFIC Bottles, PE, Wide Mouth, Square
- HEDLAND Flow Meters For Water-Based Fluids
- DAYTON Direct-Fired Portable Oil & Kerosene Torpedo Heaters
- SPEARS VALVES PVC Schedule 80 DWV Fabricated Fitting Spigots Plugs
- RUD CHAIN VIP Cobra Eye Sling Hooks
- NIBCO 714 Series Tees, C x F x C, Cast
- PARKER Pressure Regulating Valves, Brass
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WEG 01518OT3E254TF2-W40 14492592 General Purpose Motor, ODP Cast Iron 254T Frame, 10 HP, 1480 RPM, 415V, F-2 Mounting
€1,718.14 /unit