Onboard Raptor as a vendor
Email

DAYTON Direct-Fired Portable Oil & Kerosene Torpedo Heaters


Dayton portable oil-fired heaters are designed to function as the primary source of heat in open spaces, construction sites, jobsites and outdoor locations.

Filter
DAYTON 3VE48A
DAYTON 3VE49B
DAYTON 3VE50C
DAYTON 3VE51D
DAYTON 3VE52E
DAYTON 3VE53F
DAYTON 4XA50G
StyleModelPortableHeating Capacity OutputHeating AreaTank CapacityHours On One FillingDigital Temperature Readout IncludedThermostat IncludedOverall HeightPrice
A
3VE48		Handheld Portable50000 btuH1000 sq. ft.5 gal.14 hrs.NoNo16 3/4"€452.23
B
3VE49		Handheld Portable75000 btuH1700 sq. ft.5 gal.9 hrs.NoUnit Mounted16 3/4"€628.47
C
3VE50		Wheeled Mounted125000 btuH2900 sq. ft.10 gal.11 hrs.YesUnit Mounted24 5/8"€1,194.60
D
3VE51		Wheeled Mounted170000 btuH4000 sq. ft.13 gal.13 hrs.YesUnit Mounted26 1/8"€887.09
E
3VE52		Wheeled Mounted210000 btuH5000 sq. ft.13 gal.8 hrs.YesUnit Mounted26 1/8"€959.62
F
3VE53		Wheeled Mounted400000 btuH8500 sq. ft.29 gal.10 hrs.YesUnit Mounted32 7/8"€2,484.81
G
4XA50		Wheeled Mounted650000 btuH13500 sq. ft.50 gal.10 hrs.YesUnit Mounted48 3/4"€4,565.76

Direct-Fired Portable Oil & Kerosene Torpedo Heaters

Dayton oil fired heaters are used for heating ventilated spaces like construction sites and jobsites. They have open flame that straight away heats the air to warm a space. These powder coated portable heaters can be comfortably moved wherever heat is required and also provide an adjustable heat angle. Choose from a range of these torpedo heaters, available in 175, 265, 500, 600 and 3600 CFM flow rates.

Working Mechanism

  • Electric magnet pumps are used in Dayton kerosene heaters to propel fuel into the fuel line and eventually the burner head's nozzle, spraying it into the combustion chamber.
  • A spark plug ignites the fuel & air mixture and starts the heating process.
  • They circulate heated air across a room using a fan.
  • The fans suck air in from the rear.
  • Finally, the air is circulated through a cylinder to heat the area.

Features

  • Dayton torpedo heaters have an open flame that directly heats the air to warm a space.
  • Owing to their portability, they can be comfortably moved wherever heat is required and also offer an adjustable heat angle.
  • These oil-fired heaters feature powder-coated finish to resist corrosion.

Compatible Accessories

  • Fuel Tank Assemblies: Dayton torpedo heaters can be fitted with new fuel tank assemblies once the pre-installed assembly gets old, worn-out or damaged.
  • Thermostats: These temperature controls in the fuel oil torpedo heater can get damaged or show the wrong result. Users should replace them for proper heating.

Standards and Approvals

  • cCSAus
  • NEMA 5-15P

Frequently Asked Questions

What fuel do these heaters operate on?

These heaters require 1-K kerosene for electricity and combustion to operate the fan.

How much time does it take to fill a tank fully?

It requires 10 hours to fill a 50-gallon tank.

What is the maximum air flow rate of the torpedo heaters?

They offer air flow rates up to 3600 cfm.

How long can you run a torpedo heater?

A torpedo heater offers an operating capacity of about 15 hours.

What types of fuel are compatible with these Dayton portable oil-fired torpedo heaters?

  • Diesel
  • Fuel Oil
  • Jet A, JP-8 & K1 Kerosene

How to assemble these heaters?

  • Assemble the wheel, axle, handle, controls, air inlets & fan guards to the frame containing the tank & motor.
  • Fill the fuel tank and close the fuel cap.
  • Plug the power cord into a grounded power supply.
  • Adjust the thermostat settings in the attached control panel & switch On the power.

We are here to help!

Looking for a part not listed here?

Chat with us now

Popular Search Queries

Explore More