FREE delivery on orders over €150
WALTER TOOLS A1211-NO71 5058358 Jobber Length Drill Bit, #71 Size, 8 mm Flute Length, 26 mm Overall Length
Item: CU8NVDModel: A1211-NO71Cross Ref: 442G78 / 5058358
7 In Stock
Ships within 2 days via
5.00% off
€10.44 /unit
This product can only be shipped in multiples of 10Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Jobber Length Drill Bit |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Cutting Edge Dia. | 0.026" |
| Cutting Edge Length | 0.272" |
| Decimal Equivalent | 0.026 |
| Depth X Dia. Ratio | 8xd |
| Drill Bit Point Angle | 118° |
| Drill Bit Point Type | Conical Point |
| Drill Bit Size | #71 |
| Drill Dia. Tolerance | H8 |
| Finish | Bright |
| Finish-machining | Bright (Uncoated) |
| Flute Length | 8 mm |
| Flute Type | Spiral |
| Grade | General Purpose |
| Length | 1.024" |
| Material | High Speed Steel |
| Material Grade-machining | General Purpose |
| Material-machining | High Speed Steel |
| Max. Drilling Depth | 8 mm |
| Measurement System | Wire |
| Mfr. Series | N Series |
| No. Of Flutes | 2 |
| Overall Length | 26 mm |
| Point Angle | 118° |
| Point Type | Conical Point |
| Primary Material Application | Cast Iron, Steel |
| Primary Material Application Iso Code | K, P |
| Secondary Material Application | Aluminum, Brass, Bronze, Composite, Copper, Nickel, Stainless Steel, Titanium |
| Secondary Material Application Iso Code | M, N, O, S |
| Shank Dia. | 0.026" |
| Shank Length | 18 mm |
| Shank Type | Straight |
| Shank Type-machining | Straight |
| Sheeter Drill | No |
| Size | #71 |
Shipping Info:
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.6 |
| Ship width (cm) | 2.54 |
| Country of Origin | FR |
Product Variants
| Model | Max. Drilling Depth | Flute Length | Size | Shank Length | Finish | Drill Bit Size | Finish-machining | Primary Material Application Iso Code | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| A1231-0.5 | 6 mm | 6 mm | 0.5 mm | 16 mm | - | 0.5 mm | - | - | €8.03 | |
| A1211-1.21 | 16 mm | 16 mm | 1.21 mm | 22 mm | - | 1.21 mm | - | - | €7.93 | |
| A1211-1.27 | 16 mm | 16 mm | 1.27 mm | 22 mm | - | 1.27 mm | - | - | €8.82 | |
| A1211-10.75 | 94 mm | 94 mm | 10.75 mm | 48 mm | - | 10.75 mm | - | - | €39.91 | |
| A1211-11.25 | 94 mm | 94 mm | 11.25 mm | 48 mm | - | 11.25 mm | - | - | €42.87 | |
| A1211-14.75 | 114 mm | 114 mm | 14.75 mm | 55 mm | - | 14.75 mm | - | - | €99.26 | |
| A1211-3.35 | 36 mm | 36 mm | 3.35 mm | 29 mm | - | 3.35 mm | - | - | €6.87 |
Explore Products
- SIOUX CHIEF 648AG4FP
- APPROVED VENDOR P1312CV Drill Bushing P Drill Size 2.4mm
- MAIN FILTER INC. MF0336421 HC6400FUP16Z Interchange Hydraulic Filter, Glass, 3 Micron, Viton Seal, 16.81 Inch Height
- APPROVED VENDOR 4FMT6 Pressure Gauge Test 1-1/2 In
- SMC VALVES LEYG25LAB-300B Electric Actuator Slider
- APPROVED VENDOR 5WLJ1 Hammer With Flat Foot 6 In
- DUFF-NORTON nz12ex-6383-12
- TRITAN ucpk211-32 Pillow Block Unit, Low Base, Wide Inner Ring Insert, Set Screw, 2-in. Bore, 2.2500 Bore Center H
Explore More
- KEYSHAFT
- STABILA
- REMPHOS
- UNISAN
- IMPA CATALOGUE
- Exterior Mount Exhaust Fans
- Laboratory Mixer Accessories
- Fit Testing
- Drum Barrel Pump Accessories
- Dampers
- DESTACO 213 Series Horizontal Hold Down Clamps
- ANSELL 39-122 Alphatec Chemical Resistant Gloves
- CAROL Multi-Conductor Cable, Rubber, Braid Shield
- CHICAGO PNEUMATIC Die Grinders, 750 Watts
- JOHN GUEST Fixed Elbows, NPTF Thread, Acetal White
- WESTWARD Telephone Modular Plug Crimper
- GRAINGER Half Moon 0.607" Length C-1035 Steel Woodruff Key Stock
- APPROVED VENDOR 1 1/4"-7 Coarse Plain Hex Head Cap Screws
- INGERSOLL-RAND Air Powered Drills
- 3M 664X Diamond Lapping Films
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WALTER TOOLS A1211-NO71 5058358 Jobber Length Drill Bit, #71 Size, 8 mm Flute Length, 26 mm Overall Length
€10.99 /unit