FREE delivery on orders over €150
WALTER TOOLS 5058502 Jobber Length Drill Bit, 1.40 mm Size, 18 mm Flute Length, 40 mm Overall Length
Item: CU8PANModel: 5058502Cross Ref: 60FJ19
7 In Stock
Ships within 2 days via
5.00% off
€6.57 /unit
This product can only be shipped in multiples of 10Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Jobber Length Drill Bit |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Decimal Equivalent | 0.0551 |
| Depth X Dia. Ratio | 8xd |
| Drill Bit Point Angle | 118° |
| Drill Bit Point Type | Conical Point |
| Drill Bit Size | 1.4 mm |
| Drill Dia. Tolerance | H8 |
| Drill Length Class | Jobber Length |
| Drill Point Length | 0.42 mm |
| Finish | Bright |
| Finish-machining | Bright (Uncoated) |
| Flute Length | 18 mm |
| Material | High Speed Steel |
| Material-machining | High Speed Steel |
| Max. Drilling Depth | 15 mm |
| No. Of Flutes | 2 |
| Overall Length | 40 mm |
| Point Angle | 118° |
| Point Type | Conical Point |
| Primary Material Application | Cast Iron, Steel |
| Primary Material Application Iso Code | K, P |
| Secondary Material Application | Aluminum, Brass, Bronze And Copper, Graphite, Plastic And Synthetic Materials, Stainless Steel, Super Alloy And Titanium |
| Secondary Material Application Iso Code | M, N, O, S |
| Shank Length | 21.3 mm |
| Sheeter Drill | No |
| Size | 1.4 mm |
| System Of Measurement | Metric |
Shipping Info:
| Ship height (cm) | 2.54 |
| Ship length (cm) | 4 |
| Ship width (cm) | 2.54 |
| Country of Origin | FR |
Product Variants
| Model | Max. Drilling Depth | Flute Length | Size | Shank Length | Finish | Drill Bit Size | Finish-machining | Primary Material Application Iso Code | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| A1231-0.5 | 6 mm | 6 mm | 0.5 mm | 16 mm | - | 0.5 mm | - | - | €8.03 | |
| A1211-1.21 | 16 mm | 16 mm | 1.21 mm | 22 mm | - | 1.21 mm | - | - | €7.93 | |
| A1211-1.27 | 16 mm | 16 mm | 1.27 mm | 22 mm | - | 1.27 mm | - | - | €8.82 | |
| A1211-10.75 | 94 mm | 94 mm | 10.75 mm | 48 mm | - | 10.75 mm | - | - | €39.91 | |
| A1211-11.25 | 94 mm | 94 mm | 11.25 mm | 48 mm | - | 11.25 mm | - | - | €42.87 | |
| A1211-14.75 | 114 mm | 114 mm | 14.75 mm | 55 mm | - | 14.75 mm | - | - | €99.26 | |
| A1211-3.35 | 36 mm | 36 mm | 3.35 mm | 29 mm | - | 3.35 mm | - | - | €6.87 |
Explore Products
- T&S B-1105-LNM Workboard Faucet, Wall Mount, 3-1/2 Inch Centers, Lever Handles
- UNIWELD 5-200M-2 Cutting Tip, Thickness 1 To 1-1/2 Inch, Drill Size 53
- AMERICAN TORCH TIP EL24CT-75H Nozzle 3/4 Inch Tweco
- UNIWELD RUH8212 Stage Regulator, Single Stage, Cga 510 Inlet, 9/16 Inch Size
- DBI-SALA 7012817452 1401010 Fall Protection Harness, Positioning, Vest Harness, Mating / Tongue, Revolver, S, S
- WINTERS INSTRUMENTS D81RIR16CANSF2N-300# Isolation Ring, Flange Sensor, 16 Inch, Cs Centre, Neoprene, Acetal Plates, Filled
- SIOUX CHIEF 860-W2PI Floor Sink, With Ductile Iron Ring and Strainer, 2 in White PVC Hub, 9-7/8 in Round Grate
- DIXON 686X10 Push-In Male Connector, Brass, 3/16 Inch Tube x 10-32 Male UNF with Gasket
Explore More
- DAKE CORPORATION
- KEYSHAFT
- MACURCO
- EDWARDS MFG
- CONDOR USA
- Water Jetters
- Wire Rope Swage Stud Fittings
- Gas Mask Canisters
- Conduit and Cable Hangers
- Coolant Tanks
- OIL SAFE Premium Pump Quick Connect Kits
- ANSELL 80-100 Activarmr Natural Rubber Latex Coated Gloves
- IRONCLAD Summit Reflective Gloves
- ANSELL 37-155 Alphatec Solvex Comfortable Chemical Resistant Gloves
- TEMPCO NHW Series Mica Insulated Nozzle Heaters
- APPROVED VENDOR 1/4" Outside Dia. Grade 18-8 Stainless Steel Female Round Standoffs
- NORTH BY HONEYWELL AK Premium Cleanroom Gloves
- RACO Compression Couplings For Rigid Conduit
- RHEEM Gas Valves
- DESTACO 227 Series Manual Horizontal Hold Down Clamps
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WALTER TOOLS 5058502 Jobber Length Drill Bit, 1.40 mm Size, 18 mm Flute Length, 40 mm Overall Length
€6.92 /unit