FREE delivery on orders over €150
OSG VGM5-1107 Carbide End Mill, 5 Flutes, 1/2 Inch Milling Dia, 5/8 Inch Length Of Cut
Item: CT4UPKModel: VGM5-1107Cross Ref: 61LH74
7 In Stock
Ships within 2 days via
10.00% off
€183.33 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Carbide End Mill |
| Coolant Fed | Non Coolant Through |
| Corner Radius | 3/25" |
| Cutting Length | 5/8" |
| Cutting Type | Center Cutting |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Corner Radius |
| End Type | Single End |
| Finish | Titanium Aluminum Nitride Coat |
| Finish - Machining | TiAlN |
| For Material Hardness | 0 HRC to 45 HRC |
| Grade | High Performance |
| Helix Angle | 40° |
| List Number | VGM5-LN |
| Material | Carbide |
| Material - Machining | Carbide |
| Material Application | Cast Iron, Heat-Resistant Alloy, Stainless Steel, Steel |
| Material Grade - Machining | High Performance |
| Milling Dia. | 1/2" |
| Neck Dia. | 0.475" |
| Neck Length | 1/2" |
| Number Of Coolant Holes | 0 |
| Number Of Flutes | 5 |
| Overall Length | 4" |
| Primary Material Application | Steel, Cast Iron, Die Steel, Hardened Steel, Nickel, Stainless Steel, Titanium |
| Primary Material Application Iso Code | H, K, M, P, S |
| Secondary Material Application | Hardened Steels 35-45 HRC |
| Secondary Material Application Iso Code | H |
| Shank Dia. | 1/2" |
| Shank Type | Shrink Fit |
| Shank Type - Machining | Shrink Fit |
| Single End/double End | Single End |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship weight (kg) | 0.17 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Product Variants
| Model | Milling Dia. | Shank Dia. | Grade | Corner Radius | Overall Length | Number Of Flutes | Helix Angle | List Number | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| VGM5-1193 | 1" | 1" | High Performance | 0.06" | 6" | 5 | 40° | VGM5-LN | €666.92 | |
| VGM5-1199 | 1" | 1" | High Performance | 0.03" | 6" | 5 | 40° | VGM5-LN | €717.52 | |
| VGM5-1206 | 1" | 1" | High Performance | 0.03" | 7" | 5 | 40° | VGM5-LN | €760.45 | |
| VGM5-1208 | 1" | 1" | High Performance | 0.09" | 7" | 5 | 40° | VGM5-LN | €760.45 | |
| VGM5-1204 | 1" | 1" | High Performance | 1/4" | 6" | 5 | 40° | VGM5-LN | €717.52 | |
| VGM5-1202 | 1" | 1" | High Performance | 3/25" | 6" | 5 | 40° | VGM5-LN | €717.52 | |
| VGM5-1211 | 1" | 1" | High Performance | 1/4" | 7" | 5 | 40° | - | €760.45 |
Explore Products
- OSG 3300475 Micro Drill Bit, 4.75 mm Drill Bit Size, 24 mm Flute Length, 5 mm Shank Dia
- EATON 10250T224N Push to Test Pilot Light Without Lens, 30mm Size, Transformer, 480VAC, Incandescent, Round
- BALDOR / DODGE 057335 P2B-SC-204-FF Set Screw Bearing, Shaft Size 2.25 Inch, Bore Round, Steel
- CASH VALVE GT11312392A1 Diaphragm, 1/4 Size, Type B, Oxygen Cleaned
- AMERICAN TORCH TIP 34393 Electrode Point 27 Esab 27
- SMC VALVES KV2H15-37S Male Connector
- AMERICRAFT MANUFACTURING 1936-B-2-1-EXP Roof Exhaust Ventilator, Hooded, Belt Drive, Size 36 Inch, 1 Phase, 2 HP
- MANITOWOC 5004649 O-Ring
Explore More
- KEYSHAFT
- MASTER
- CHEMGUARD
- ABBOTT WORKHOLDING PRODUCTS
- L9
- Stencil Ink
- Pipe and Tubing Brushes
- Booster Pumps and Systems
- Ceramic Fiber Insulation
- Gas Unit Heater Accessories
- TURTLESKIN CP-500 Insider Gloves
- CONDOR Coated Gloves, ANSI Cut Level A3, Palm Dipped, Polyurethane, Gray
- VIEGA PROPRESS 45 Degree Elbows, Copper, Press x Press, EPDM
- TEMPCO Screw Plug Immersion Heaters, Steel Screw Plugs
- ZURN Exposed, Top Spud, Manual Flush Valve
- BALDOR / DODGE Type K, Wide-Slot Takeup, Solid Tapered Roller Bearings
- COTTERMAN 1000 Series Rolling Metal Ladders
- CASH VALVE Plugs
- PHILIPS Lamps
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
OSG VGM5-1107 Carbide End Mill, 5 Flutes, 1/2 Inch Milling Dia, 5/8 Inch Length Of Cut
€203.70 /unit