FREE delivery on orders over €150
OSG VGM5-0094 Carbide End Mill, 5 Flutes, 5/16 Inch Milling Dia, Shrink Fit
Item: CT4UZFModel: VGM5-0094Cross Ref: 61LE82
7 In Stock
1.25
0.3125"
Ships within 2 days via
10.00% off
€100.77 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Carbide End Mill |
| Coolant Fed | Non Coolant Through |
| Corner Radius | 0.02" |
| Cutting Length | 1 1/4" |
| Cutting Type | Center Cutting |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Corner Radius |
| End Type | Single End |
| Finish | Titanium Aluminum Nitride Coat |
| Finish - Machining | TiAlN |
| For Material Hardness | 0 HRC to 45 HRC |
| Grade | High Performance |
| Helix Angle | 40° |
| List Number | VGM5 |
| Material | Carbide |
| Material - Machining | Carbide |
| Material Application | Cast Iron, Hardened Steel, Heat-Resistant Alloys, Stainless Steel, Steel |
| Material Grade - Machining | High Performance |
| Milling Dia. | 5/16" |
| Number Of Coolant Holes | 0 |
| Number Of Flutes | 5 |
| Overall Length | 3" |
| Primary Material Application | Cast Iron, Hardened Steel, Inconel, Stainless Steel, Steel, Titanium, Tool And Die Steel |
| Primary Material Application Iso Code | H, K, M, P, S |
| Secondary Material Application | Hardened Steels 35-45 HRC |
| Secondary Material Application Iso Code | H |
| Shank Dia. | 5/16" |
| Shank Type | Shrink Fit |
| Shank Type - Machining | Shrink Fit |
| Single End/double End | Single End |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship weight (kg) | 0.05 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Product Variants
| Model | Milling Dia. | Shank Dia. | Grade | Corner Radius | Overall Length | Number Of Flutes | Helix Angle | List Number | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| VGM5-1193 | 1" | 1" | High Performance | 0.06" | 6" | 5 | 40° | VGM5-LN | €666.92 | |
| VGM5-1199 | 1" | 1" | High Performance | 0.03" | 6" | 5 | 40° | VGM5-LN | €717.52 | |
| VGM5-1206 | 1" | 1" | High Performance | 0.03" | 7" | 5 | 40° | VGM5-LN | €760.45 | |
| VGM5-1208 | 1" | 1" | High Performance | 0.09" | 7" | 5 | 40° | VGM5-LN | €760.45 | |
| VGM5-1204 | 1" | 1" | High Performance | 1/4" | 6" | 5 | 40° | VGM5-LN | €717.52 | |
| VGM5-1202 | 1" | 1" | High Performance | 3/25" | 6" | 5 | 40° | VGM5-LN | €717.52 | |
| VGM5-1211 | 1" | 1" | High Performance | 1/4" | 7" | 5 | 40° | - | €760.45 |
Explore Products
- SLOAN 318188 Valve Assembly, 0.25 Gpf Flow Rate
- EATON EGB3020FFG Molded Case Circuit Breaker, Eg-Frame, 3-Pole, 20A, 600Y/347 Vac, Line And Load, 50/60 Hz
- RUD CHAIN 7904282 SW 12 Key With Spring, M20 Nominal Size
- APOLLO VALVES PWR7481397 Straight Coupling, With O Stop, Gas, Size 1-1/2 Inch
- EATON XTAE012B10B001 Electronic Motor Starter, 12 A, 220 V 50 Hz, 240 V 60 Hz, 1No, B Frame, 45 mm, 0.6-1 A
- WINSMITH E24XDBS3X000C1 Gear Reducer, Solid Input Shaft, Solid Output Shaft, Right Worm
- APOLLO VALVES 19KJHK24 Bronze Safety Relief Valve with Brass Trim, Teflon Seat, 24 Psig, 2 x 2-1/2 Inch Size, MNPT x FNPT
- CONDOR 786F41 High Visibility Vest, ANSI Class 2, U, 5XL, Yellow/Green, Mesh Polyester, Zipper
Explore More
- FILLRITE
- KEN-TOOL
- KEYSHAFT
- STANLEY VIDMAR
- ROHL
- Jobsite Boxes
- Gas Pressure Washers
- Fall Protection Kits
- Wood Drilling Bit Extensions
- Dock Levelers
- MCR SAFETY Leather Palm Work Gloves
- RUD CHAIN VLBG Load Rings, Metric Thread
- ACME ELECTRIC WI750 Series Medium Voltage Transformers, 3 Phase, 60Hz, 2.5kV & 5kV Class
- OK INDUSTRIES Battery Wire Wrapping & Unwrapping Kits
- ANVIL AS1200 Series O.D. Tubing Clamps, Copper Plated
- OIL SAFE Fluid ID Labels
- PIP Ergonomic Wrist Supports
- REES 30.5 mm Legend Plates
- SIOUX CHIEF Strainers For Bell Trap Drains
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
OSG VGM5-0094 Carbide End Mill, 5 Flutes, 5/16 Inch Milling Dia, Shrink Fit
€111.97 /unit