FREE delivery on orders over €150
OSG 3096254 Ball End Mill, 3 Flutes, 12 mm Milling Dia, 18 mm Length Of Cut, 220 mm Overall Length
Item: CT4TBJModel: 3096254Cross Ref: 34ZV51
7 In Stock
0.47"
0.78"
Ships within 2 days via
10.00% off
€1,909.82 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Ball End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip-breaker | No |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Cutting Length | 18 mm |
| Cutting Type | Center Cutting |
| Dimension Type | Metric |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing, Roughing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Ball Nose |
| End Type | Single End |
| Finish | WXS |
| Finish - Machining | WXS |
| Grade | General Purpose |
| Hardened Compatibility | Yes |
| Helix Angle | 45° |
| List Number | 9581 |
| Material | Carbide |
| Material - Machining | Carbide |
| Material Grade - Machining | General Purpose |
| Milling Dia. | 12 mm |
| Neck Length | 160.8 mm |
| Non Ferrous (n) Compatibility | No |
| Number Of Flutes | 3 |
| Overall Length | 220 mm |
| Primary Material Application | Cast Iron, Hardened Steel, Steel, Tool And Die Steel |
| Primary Material Application Iso Code | H, K, P |
| Shank Dia. | 20 mm |
| Shank Type | Straight |
| Shank Type - Machining | Straight |
| Single End/double End | Single End |
| Stainless (m) Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | No |
| System Of Measurement | Metric |
Shipping Info:
| Ship weight (kg) | 0.32 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Product Variants
| Product | Model | Overall Length | Milling Dia. | Number Of Flutes | Shank Dia. | List Number | Helix Angle | Length Of Cut | End Mill Application | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
497-1000 | 6" | 1" | 2 | 1" | 497 | 15° | - | Finishing, Roughing | €883.44 | |
 |
HP416-5000 | 4" | 1/2" | 2 | 1/2" | HP416 | 30° | - | Finishing, Roughing | €160.64 | |
 |
36100911 | 4" | 1/2" | 2 | 1/2" | 3610 | - | - | Finishing, Roughing | €265.55 | |
 |
44101611 | 4" | 1/2" | 2 | 1/2" | 4410 | 30° | - | Finishing, Roughing | €328.54 | |
|
497-5000 | 5" | 1/2" | 2 | 1/2" | 497 | 15° | - | Finishing, Roughing | €226.01 | |
 |
90110511 | 3" | 1/4" | 2 | 1/4" | 9011 | 30° | - | Finishing, Roughing | €297.41 | |
 |
36901711 | 4" | - | 2 | 1/4" | 3690 | 30° | - | Finishing, Roughing | €172.33 |
Explore Products
- KUNKLE 0264-C02-KG Safety Relief Valve, 1/2 Inch Inlet Size, 3/4 Inch FNPT, Air/Gas, Stainless Steel
- ELDON JAMES T0-2.5MN-QC Medical Grade White Nylon Tee, 5/32 Inch Inside Dia.
- KLEIN TOOLS 935L 69217-8 Bubble Level, 24 Inch Size
- BALDOR / DODGE 033678 P2B-LT7-108 Plain Bearing, Solidlube, Bore Round, Steel, Shaft Size 1.50 Inch
- TSUBAKI C2162H RIV
- APPROVED VENDOR 6NFG2 Sheet Uhmw-pe White 3/16 Inch Th 48 x 120 In
- DUPONT C3122TTNMD0006BN Hooded Chemical Resistant Coveralls, Tychem 5000, Taped Seam, Tan, M, Elastic Cuff
- PRO1 IAQ T501M Low Voltage Thermostat, Gas Forced Air Furnaces
Explore More
- KEYSHAFT
- SANDUSKY LEE
- VORTEC
- STERILITE
- REER
- Nippers and Nibblers
- Power Meters and Analyzers Accessories
- Durometer Tester Accessories
- Knurled Knobs
- Common Nails
- CONDOR Coated Gloves, Nitrile, 3/4 Dotted/Double Dipped
- KEO Kounterbore Sets
- GLOBE SCIENTIFIC Labeling Tapes, 1 Inch x 500 Inch per Roll
- OK INDUSTRIES WD-30 Series Wire Dispensers
- ANVIL AS300S Series Channel With Long Slots
- TENNSCO Workbench
- EATON Danfoss MRV3-16 Series Directional Control Valves
- GRAINGER Chemical Resistant Santoprene Tubing
- SCHLAGE Door Knob Locksets
- SENSOREX Toroidal Conductivity Transmitters
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
OSG 3096254 Ball End Mill, 3 Flutes, 12 mm Milling Dia, 18 mm Length Of Cut, 220 mm Overall Length
€2,122.02 /unit