EATON Danfoss MRV3-16 Series Directional Control Valves
Eaton Danfoss MRV3-16 Series directional control valves are ideal for controlling the flow of general-purpose hydraulic fluids complying with standards like MIL?H?5606, SAE 10 & SAE 20. They are suitable for use in harvesters, refuse haulers and other applications.
Filter
A
B
CWorking Mechanism
- These directional control valves block valve port 2 in one position and direct the fluid flow between valve ports 1 & 3.
- Users need to turn the operator 90 degrees to direct the flow between valve ports 1 & 2 and block port 3.
- During cross-over transitions, all of these ports get blocked.
Features
- Eaton Danfoss MRV3-16 Series directional control valves have steel construction for structural rigidity & durability.
- They feature screw-in cartridge type for easy mounting / installation.
- These direct-acting MRV3-10 Series directional control valves have Buna-N seals to prevent leakage.
- They have 3 ports with a maximum flow rate of 64 l/min (17 gpm).
- These 4-way 3-position valves can operate at temperatures ranging from -40 to 120 degrees C.
Compatible Accessories
- Eaton 889636 Seal Kit: This seal repair kit has a Viton seal that provides enhanced chemical resistance in these flow control valves.
- Eaton 889632 Seal Kit: This seal repair kit has a Buna-N seal used to replace worn-out or damaged Buna-N seals in these flow control valves.
Frequently Asked Questions
What is the pressure rating of these Eaton Danfoss MRV3-16 Series directional control valves?
These Vickers Eaton MRV3-16 Series directional control valves have a pressure rating of 210 bar (3000 psi).
What is the allowable stem torque in the valve cavity of these Eaton Danfoss MRV3-16 Series valves?
The allowable stem torque applicable in the valve cavity of these Eaton Danfoss MRV3-16 Series directional control valves is 108 to 122 Nm to prevent damage to the valve.
How to prevent contaminants in these Eaton Danfoss MRV3-16 Series directional control valves?
Users are recommended to install filtration equipment with cleanliness code 18/16/13 before the valves to prevent contaminants from entering them.
We are here to help!
Looking for a part not listed here?
Explore More
- KEYSHAFT
- STRAUB
- HOBO
- FENWAL IGNITION CONTROLS
- INTEGRA
- Combined Drill/Countersinks
- Wall Shelves
- Nonsparking Tool Sets
- Caliper Accessories
- Metric Mounting Hardware
- MEMPHIS GLOVE NXG Work Gloves, 15 Gauge, White, Nylon Shell
- CONDOR Coated Gloves, Smooth, Polyurethane, Palm Dipped, Black
- VIBCO SCR Adjustable Speed and Force Electric Vibrators
- ACME ELECTRIC Three Phase Dry Type Distribution Transformers, 208V Delta Primary Volts, 208Y/120 Secondary Volts
- DAYTON Replacement Impellers
- VESTIL DBT Series Four-Wheel Drum Trucks
- STANLEY Hanging Door Hardware
- VELP SCIENTIFIC Overhead Mixers
- BANJO FITTINGS Series B Cam Lock Couplings, Female Coupler x NPT