FREE delivery on orders over €150
MICRO 100 QBB-180750 Boring Bar, 0.75 Inch Max. Bore Depth, 0.055 Inch Centerline Offset, 0.18 Inch Head Width
Item: AA7ANXModel: QBB-180750Cross Ref: 15R638
7 In Stock
Ships within 2 days via
10.00% off
€55.01 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Boring Bar |
| Bore Depth | 3/4" |
| Bore Dia. | 0.18" |
| Boring Bar Type | Boring |
| Center To Cutting Tip | 0.055" |
| Compatible With Product Type | Micro-Quik Tool Holder |
| Cutting Application | Boring |
| Cutting Direction | Right Hand |
| Features | Coolant Fed Enabled Shank Design, Corner Radius Profile, Split Geometry |
| Finish | Uncoated |
| Finish - Machining | Bright (Uncoated) |
| Head Width | 0.18" |
| Max. Bore Depth | 3/4" |
| Min. Bore Dia. | 0.196" |
| Offset Point | 0.055" |
| Overall Length | 2" |
| Overhang | 0.853" |
| Product Datasheet | micro-100-bb-050150.pdf |
| Projection | 0.045" |
| Radius | 0.005" |
| Shank Material | Carbide |
| Side Cutting Edge Angle | 6° |
| System Of Measurement | Imperial |
Shipping Info:
| Ship weight (kg) | 0.02 |
| Ship height (cm) | 0.64 |
| Ship length (cm) | 5.08 |
| Ship width (cm) | 0.64 |
| HS code | 8207600061 |
| Country of Origin | US |
Documentation:
Product Variants
| Model | Radius | Center To Cutting Tip | Shank Dia. | Finish | Min. Bore Dia. | Projection | Offset Point | Overall Length | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| QBB-110300 | 0.003" | 0.0163" | 3/16" | Uncoated | 0.122" | 0.028" | 0.0163" | - | €56.64 | |
| QBB-110300X | 0.003" | 0.0163" | 3/16" | - | 0.122" | 0.028" | 0.0163" | 1 1/2" | €61.21 | |
| QBB-110500 | 0.003" | 0.0163" | 3/16" | Uncoated | 0.122" | 0.028" | 0.0163" | - | €56.64 | |
| QBB-110500X | 0.003" | 0.0163" | 3/16" | AlTiN Coat | 0.122" | 0.028" | 0.0163" | 1 1/2" | €61.21 | |
| QBB-110700 | 0.003" | 0.0163" | 3/16" | Uncoated | 0.122" | 0.028" | 0.0163" | 2" | €56.64 | |
| QBB-110700X | 0.003" | - | 0.187" | AlTiN Coat | 0.122" | 0.028" | - | 2" | €61.21 | |
| QBB-120250 | 0.003" | 0.0263" | 3/16" | Uncoated | 0.132" | 0.03" | 0.0263" | - | €56.64 |
Explore Products
- APPROVED VENDOR M38093.300.0001 Flat Washer, M30 Bolt Size, Std, 31mm I.D., 56mm O.D.
- AMETEK LAMB 529187 529187000 Washer, Stainless Steel
- SLOAN 3880172
- MAIN FILTER INC. MF0591645 11000G25A000M Interchange Hydraulic Filter, Wire Mesh, 25 Micron Rating, Viton Seal, 15.7 Inch Height
- APOLLO VALVES 83B1451538 Ball Valve, 1 Inch NPT, Class 600, 3 Pieces, Carbon Steel Handle
- MAIN FILTER INC. MF0306454 Interchange Hydraulic Filter, Glass, 25 Micron, Viton Seal, 12.59 Inch Height
- NORLAKE 133727 NOR-LAKE SCIENTIFIC 133727
- MASTERDRIVES 2/5V550-1610 Taper Bushing Sheave, 5V Section, 2 Groove
Explore More
- APW WYOTT
- FAIRBANKS
- KEYSHAFT
- THE KENNEDY GROUP
- SSP SAFETY SYSTEM PRODUCTS
- Dunnage Racks
- Faceshield Assemblies
- Electrical Wall Plates
- Wiring Duct Accessories
- Switchboard Mats
- RINGERS GLOVES Extrication Increased Visibility Impact Gloves
- CONDOR Pigskin Leather Standard General Purpose Gloves
- CONDOR Knit Gloves, Full Finger, Uncoated, 13 Gauge, White
- RUD CHAIN WPPH-VIP Powerpoint Direct Vip Chain Connection Hoist Rings
- CHICAGO PNEUMATIC CP26 Series Clutch Screwdrivers
- BUYERS PRODUCTS Mesh Tarp/hardware Kit
- ANVIL Strut Insulated Couplings, 3/8 Wall
- BROWNING Steel Finished Bore Single Sprockets For No. 60 Chain, Hardened Teeth
- ADAPT-ALL 5007 Series Fitting Adapters
- HUBBELL WIRING DEVICE-KELLEMS Twist-Lock Angled Safety-Shroud Receptacles
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
MICRO 100 QBB-180750 Boring Bar, 0.75 Inch Max. Bore Depth, 0.055 Inch Centerline Offset, 0.18 Inch Head Width
€61.12 /unit