FREE delivery on orders over €150
MICRO 100 GEM-375-3 End Mill, 0.375 Inch Cutter Dia., 0.875 Inch Length of Cut, 0.375 Inch Shank Dia.
Item: AA6LMCModel: GEM-375-3Cross Ref: 14G001
7 In Stock
3
3/8"
Ships within 2 days via
10.00% off
€66.03 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | End Mill |
| Cutter Dia. | 3/8" |
| Cutting Direction | Right Hand |
| Cutting Length | 7/8" |
| Cutting Type | Center |
| Drilling Tool Configuration | Individual |
| End Mill Application | Roughing/Finishing |
| End Mill Style | Square |
| End Type | Single End |
| Finish | Uncoated |
| Helix Angle | 30° |
| Material | Carbide |
| Milling Dia. | 3/8" |
| No. Of Flutes | 3 |
| Non Ferrous Compatibility | Yes |
| Overall Length | 2 1/2" |
| Primary Material Application | All Materials |
| Primary Material Application Iso Code | M, P, S |
| Shank Dia. | 3/8" |
| Shank Type | Straight |
| Single End/double End | Single End |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship weight (kg) | 0.06 |
| Ship height (cm) | 0.95 |
| Ship length (cm) | 6.35 |
| Ship width (cm) | 0.95 |
| HS code | 8207703030 |
| Country of Origin | US |
Product Variants
| Product | Model | Overall Length | Milling Dia. | Helix Angle | List Number | Shank Dia. | Finish | Cutting Length | End Mill Application | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
GEM-140-2X | 2" | 0.141" | 30° | GEM | - | AlTiN Coat | 1/2" | Roughing/Finishing | €50.73 | |
 |
GEM-140-3 | 2" | 0.141" | 30° | GEM | - | Bright | 1/2" | Roughing/Finishing | €44.41 | |
|
GEM-140-3X | 2" | 0.141" | 30° | GEM | - | AlTiN Coat | 1/2" | Roughing/Finishing | €50.40 | |
 |
GEM-140-4 | 2" | 0.141" | 30° | GEM | - | Bright | 1/2" | Roughing/Finishing | €44.41 | |
 |
GEM-140-4X | 2" | 0.141" | 30° | GEM | - | - | 1/2" | Roughing/Finishing | €49.29 | |
|
GEM-156-2 | 2" | 0.156" | 30° | GEM | - | Bright | 0.563" | Roughing/Finishing | €44.41 | |
|
GEM-156-2X | 2" | 0.156" | 30° | GEM | - | AlTiN Coat | 0.563" | Roughing/Finishing | €50.73 |
Explore Products
- GROVE GEAR EL8260110.00 EL-BM826-7.5-L-180 Worm Reducer, 7.5:1 Ratio, 0.75 Inch I.D, 1.25 Inch O.D, Aluminum
- GRAINGER 12425_36_0 Tool Steel Rectangular Bar, 2 Inch Thick, 3 Inch x 36 Inch Nominal Size
- REGAL 008448AS88 Spiral Flute Tap, 3/8-16 Size, H3 Limit, 3 Flutes, Bottom With TiALN Coating
- REGAL 008746AS94 Taper Pipe Tap, 1/8-27 NPT, 4 Flutes, Low Angle, Stainless Steel With Alcrona Coating
- HOFFMAN N360846G150 Enclosure Air Conditioner, Outdoor With Heat Package, 8000 BTU, 460V, Steel
- VULCAN HART 00-428416-000G1 Pilot Tip And Tubing Assembly, 5.15 x 9.35 x 1.95 Inch Size
- SMC VALVES ITV2030-01N2BL4 Regulator, 1/4 Inch Size
- SPEARS VALVES 95032J100-005 Diaphragm Valve, Flanged, FKM, Air To Spring, 80 PSI, 1/2 Size, CPVC
Explore More
- KEYSHAFT
- MALCO
- NIROFLEX USA
- QMARK
- FABORY
- Legend Plates
- Electronic Temperature Controller Acc.
- Industrial and Commercial Dehumidifiers
- Drill Bit Cases Cabinets
- Linear Guide Rail and Slide Assemblies
- NORTH BY HONEYWELL NF11 Northflex Nylon Gloves, Red
- NORTH BY HONEYWELL Northflex Light Task General Purpose Gloves
- PROTO Impact Socket, 6 Point, 3/8 Inch Drive, Imperial, Heat-Treated Alloy Steel
- ANVIL AS809 Series Double Channel Brackets
- MASTER LOCK Rotating Eye Hasp
- MERIT Abrasive Cartridge Roll
- USA SEALING Rod Stocks
- BUSSMANN LPJ-SP Series Low Peak Time Delay Fuse Links
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
MICRO 100 GEM-375-3 End Mill, 0.375 Inch Cutter Dia., 0.875 Inch Length of Cut, 0.375 Inch Shank Dia.
€73.37 /unit