FREE delivery on orders over €150
MICRO 100 GEM-281-3 End Mill, 0.2812 Inch Cutter Dia., 0.75 Inch Length of Cut, 0.3125 Inch Shank Dia.
Item: AA6LLRModel: GEM-281-3Cross Ref: 14F988
7 In Stock
3
0.281"
Ships within 2 days via
10.00% off
€57.99 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | End Mill |
| Cutter Dia. | 9/32" |
| Cutting Direction | Right Hand |
| Cutting Length | 3/4" |
| Cutting Type | Center |
| Drilling Tool Configuration | Individual |
| End Mill Application | Roughing/Finishing |
| End Mill Style | Square |
| End Type | Single End |
| Finish | Bright |
| Helix Angle | 30° |
| List Number | GEM |
| Material | Carbide |
| Material Grade | Grade C2 Micrograin |
| Milling Dia. | 9/32" |
| Milling Dia. | 0.281" |
| No. Of Flutes | 3 |
| Non Ferrous Compatibility | Yes |
| Overall Length | 2 1/2" |
| Primary Material Application | All Materials |
| Primary Material Application Iso Code | M, P, S |
| Shank Dia. | 5/16" |
| Shank Diameter | 5/16" |
| Shank Type | Straight |
| Single End/double End | Single End |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship weight (kg) | 0.04 |
| Ship height (cm) | 0.79 |
| Ship length (cm) | 6.35 |
| Ship width (cm) | 0.79 |
| HS code | 8207703030 |
| Country of Origin | US |
Product Variants
| Product | Model | Overall Length | Milling Dia. | Helix Angle | List Number | Shank Dia. | Finish | Cutting Length | End Mill Application | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
GEM-140-2X | 2" | 0.141" | 30° | GEM | - | AlTiN Coat | 1/2" | Roughing/Finishing | €50.73 | |
 |
GEM-140-3 | 2" | 0.141" | 30° | GEM | - | Bright | 1/2" | Roughing/Finishing | €44.41 | |
|
GEM-140-3X | 2" | 0.141" | 30° | GEM | - | AlTiN Coat | 1/2" | Roughing/Finishing | €50.40 | |
 |
GEM-140-4 | 2" | 0.141" | 30° | GEM | - | Bright | 1/2" | Roughing/Finishing | €44.41 | |
 |
GEM-140-4X | 2" | 0.141" | 30° | GEM | - | - | 1/2" | Roughing/Finishing | €49.29 | |
|
GEM-156-2 | 2" | 0.156" | 30° | GEM | - | Bright | 0.563" | Roughing/Finishing | €44.41 | |
|
GEM-156-2X | 2" | 0.156" | 30° | GEM | - | AlTiN Coat | 0.563" | Roughing/Finishing | €50.73 |
Explore Products
- JET TOOLS JT9-140099 Electric Hoist, 2 Ton Capacity, 60 Feet Lift Height, 3 Phase
- MASTERDRIVES 4B184Q1 Dst Sheave, A/B Section, 4 Groove
- LUCKY LINE PRODUCTS 32500 Ball Chain No 10 Silver
- BALDOR / DODGE 26AZ40H14WP TIGEAR-2 E-Z KLEEN Reducer-White
- WALTER TOOLS F4138.T28.032.Z02.33 5159800 Indexable Mill Cutter F4138t28032z0233
- 80/20 2286 Tool Holder Open Bottom For10, 15, 25, 30, 40 Series
- ABLOY 626F AU 630 RHR LC Exit Device Trim, Lever, 1, Stainless Steel, 48 Inch Size
- SPEC C01200220500S Compression Spring, 25.9 lbs/In Stiffness Rate, 2.8 lbs Load Capacity, Stainless Steel
Explore More
- CENTRIPRO
- KEYSHAFT
- LIND EQUIPMENT
- STREN-FLEX
- NEPHROS
- Locking Clamps
- Counter and Bench Brushes
- Lockset Latches
- Collar Bearings
- Oil Level Gauges
- ECKO Ventilation Ducts
- MUELLER INDUSTRIES 185CS-N Simplex Basket Strainers
- MUELLER INDUSTRIES 74HHH Sure Check Double Disc Check Valves
- RUD CHAIN LPW-U Lashing Points, Welding
- RUD CHAIN VLBS Octagon Lifting Rings
- ASCO VALVES Solenoid Valves
- PROTO Prick Punch
- COOPER B-LINE B532 Series Five Hole Tee Gusset Plates
- STARRETT-UK High Speed Steel Pilot Drill Bits
- DUFF-NORTON Right Hand Rotor Thread Rotary Unions
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
MICRO 100 GEM-281-3 End Mill, 0.2812 Inch Cutter Dia., 0.75 Inch Length of Cut, 0.3125 Inch Shank Dia.
€64.44 /unit