FREE delivery on orders over €150
M A FORD 305M0030 Micro Drill Bit, 0.30 mm Drill Bit Size, 4.80 mm Flute Length, 3 mm Shank Dia
Item: CT2ABUModel: 305M0030Cross Ref: 794ND0
7 In Stock
Ships within 2 days via
5.00% off
€23.01 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Micro Drill Bit |
| Circuit Board Drill | No |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Decimal Equivalent | 0.0118 |
| Depth X Dia. Ratio | 12xd |
| Drill Bit Point Angle | 135° |
| Drill Bit Size | 0.3 mm |
| Drill Dia. Tolerance | -0.0003" to 0" |
| Finish | Bright Uncoated |
| Finish-machining | Bright (Uncoated) |
| Flute Length | 4.8 mm |
| Flute Type | Helical |
| Grade | High Performance |
| Helix Angle | 12° |
| Material | Carbide |
| Material Grade-machining | HIGH PERFORMANCE |
| Material-machining | Carbide |
| Max. Drilling Depth | 3.6 mm |
| No. Of Coolant Holes | 0 |
| No. Of Flutes | 2 |
| Overall Length | 38 mm |
| Primary Material Application | Cast Iron, Hardened Steel, Non Ferrous, Special Alloy, Stainless Steel, Steel |
| Primary Material Application Iso Code | H, K, M, N, O, P, S |
| Secondary Material Application Iso Code | H, K, M, N, P, S |
| Shank Dia. | 3 mm |
| Shank Length | 1.3071" |
| Shank Type | Straight |
| Shank Type-machining | Straight |
| Spiral Direction | Right Hand |
| System Of Measurement | Metric |
| Web Construction | Web Thinned |
| Web Thinning | Web Thinned |
Shipping Info:
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Product Variants
| Model | Overall Length | Decimal Equivalent | Shank Dia. | Drill Bit Size | Max. Drilling Depth | Price | |
|---|---|---|---|---|---|---|---|
| MXDCLM0100A | 60 mm | 0.0394 | 3 mm | 1 mm | 14.5 mm | €171.18 | |
| MXDCLM0110A | 60 mm | 0.0433 | 3 mm | 1.1 mm | 16.36 mm | €171.18 | |
| MXDCLM0120A | 65 mm | 0.0472 | 3 mm | 1.2 mm | 18.21 mm | €171.18 | |
| MXDCLM0130A | 65 mm | 0.0512 | 3 mm | 1.3 mm | 19.05 mm | €171.18 | |
| MXDCLM0140A | 65 mm | 0.0551 | 3 mm | 1.4 mm | 20.9 mm | €171.18 | |
| MXDCLM0150A | 65 mm | 0.0591 | 3 mm | 1.5 mm | 21.74 mm | €171.18 | |
| MXDCLM0160A | 70 mm | 0.063 | 3 mm | 1.6 mm | 23.6 mm | €171.18 |
Explore Products
- MAIN FILTER INC. MF0609929 Interchange Hydraulic Filter, Cellulose, 10 Micron, Buna Seal, 2.16 Inch Height
- GEMS SENSORS PS62-40-6MSZ-B-SP Pressure Switch, 9/16-18 SAE Male, 150 to 600 PSI, Zinc-Plated Steel Housing, -40-230 F
- APPROVED VENDOR M55010.200.0090 Hex Head Cap Screw, M20x2.5 Thread Size, SS, 90 mm Lg., 30 mm Head Wd.
- BURNDY WSL11PB Stirrup Connector, 2/0 AWG, Aluminum, ANSI Class AA
- APPROVED VENDOR 1NDT8 Compression Spring, 12.87 lbs/In Stiffness Rate, 8.24 lbs Load Capacity, Stainless Steel
- PROCON 102A070R11BC Rotary Vane Pump, Brass, 70 GPH, Fluorocarbon, Standard-Non External Adjust
- TITAN FASTENERS JLF88010
- MURRELEKTRONIK 7000-13101-2031000 Cordset, 5-pole, M12, Male to Flying Leads, 10 m, PVC, M12 x 1, 4 A, 22 AWG, Gray Jacket, IP65, IP66K, IP67
Explore More
- FRIO-TEMP
- KEYSHAFT
- WEILER
- SLICK LOCKS
- SIMPLEHUMAN
- Mounted Bearings
- Trenching Shovels
- Coolant Mixers
- Multi-Material Screws
- Brake Lines
- DWYER INSTRUMENTS PAFS-1000 Series Averaging Flow Sensors
- ADB HOIST RINGS MFG. Super Coil Hoist Rings
- BURNDY GRC Type Mechanical Ground Rod Clamps
- ANVIL AS679 Series U Supports
- GLOBE SCIENTIFIC Snap Caps with One Thumb Tab, For 13 mm Tubes
- BRADY Pipe Marker, Domestic Hot Water Supply
- YALE Electronic Keyless Deadbolts
- EATON C441 Series Communication Modules
- 80/20 15 Series 1515-LS Four Open T-Slotted Profile Extrusions
- WEG General Purpose Three Phase Motors, Double Speed-Double Windings, TEFC
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
M A FORD 305M0030 Micro Drill Bit, 0.30 mm Drill Bit Size, 4.80 mm Flute Length, 3 mm Shank Dia
€24.22 /unit