GROVE GEAR NH8300278.00 NH-BMQ830-7.5-D-180 Worm Reducer, 7.5:1 Ratio, 1.125 Inch I.D, 1.25 Inch O.D, Cast Iron
Get it by Tuesday, Dec 23
€2,220.88 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Reducer |
| Assembly | BMQ-D |
| Center Distance | 3" |
| Frame | 180TC |
| Gear Type | Worm |
| Gearbox Type | Worm |
| Housing Material | Cast Iron |
| Input Bore (c Face) | 1 1/8" |
| Input Bore Size | 1 1/8" |
| Input Dia. | 1 1/8" |
| Input Hp @ 1750 Rpm | 6.049 hp |
| Input Keyway Size (c Face) | 1/4" x 1/8" |
| Input Rpm | 1750 RPM |
| Input Style | C Face Quill |
| Material | Cast Iron |
| Max Input Hp | 6 879/1000 hp |
| Max. Input Hp | 6.879 hp |
| Mounting Type | Base |
| No. Of Gear Reductions | 1 |
| Output Diameter | 1 1/4" |
| Output Hp | 6.421 hp |
| Output Key Size | 1/4" x 1 3/4" |
| Output Rpm | 233 RPM |
| Output Shaft | Solid Shaft |
| Output Shaft Assembly Code | D |
| Output Shaft Dia. | 1 1/4" |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Shaft Thrust Rating | 1944 |
| Output Shaft Type | Double Shaft |
| Output Style | D |
| Output Torque | 1519 lbs.-in. |
| Overhung Load | 2170 lbs. |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Reducer | Worm - Right Angle |
| Reduction Type | Single |
| Series | NH Series |
| Series Style | NH-BMQ-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Ships Factory Direct | No |
| Tap Depth | 3/4" |
| Tap Size | 3/8"-16 |
| Thread Type | Coarse |
Shipping Info:
| Ship weight (kg) | 26.1 |
| Ship height (cm) | 38.1 |
| Ship length (cm) | 49.23 |
| Ship width (cm) | 38.43 |
Product Variants
| Model | Max. Input Hp | Frame | Output Torque | Output Shaft Type | Gear Type | Overhung Load | Input Rpm | Output Shaft Dia. | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| NH8300280.00 | 4.843 hp | 180TC | 2026 lbs.-in. | Double Shaft | Worm | 2170 lbs. | 1750 RPM | 1 1/4" | €2,220.88 | |
| NH8300281.00 | 3.947 hp | 180TC | 2015 lbs.-in. | Double Shaft | Worm | 2170 lbs. | 1750 RPM | 1 1/4" | €2,220.88 | |
| NH8300277.00 | 9.093 hp | 180TC | 1131 lbs.-in. | Double Shaft | Worm | 2170 lbs. | 1750 RPM | 1 1/4" | €2,220.88 | |
| NH8300245.00 | 3.947 hp | 140TC | 2015 lbs.-in. | Double Shaft | Worm | 2170 lbs. | 1750 RPM | 1 1/4" | €2,220.88 | |
| NH8300246.00 | 3 71/200 hp | 140TC | 2099 lbs.-in. | Double Shaft | Worm | 2170 lbs. | 1750 RPM | 1 1/4" | €2,220.88 | |
| NH8300282.00 | 3 71/200 hp | 180TC | 2099 lbs.-in. | Double Shaft | Worm | 2170 lbs. | 1750 RPM | 1 1/4" | €2,220.88 | |
| NH8300313.00 | 9.093 hp | 210TC | 1131 lbs.-in. | Double Shaft | Worm | 2170 lbs. | 1750 RPM | 1 1/4" | €2,220.88 |
Explore Products
- GROVE GEAR R8472023.00 Quill Input Inline Helical Reducer
- BROWNING 1296458 T45LX 1 3/16 Torque Limiter
- EATON ECC03C2H4A-P8P23 Enclosed Lighting Contactor, NEMA 3R, 277V Coil, 4P, On/Off Pushbutton
- GRAINGER 78072775475 Very Fine Aluminium Oxide Sanding Sheet, 220 Grit, 11 L x 9 Inch W
- EATON C25DNE225R-GL Definite Purpose Contactor, 380-415 Vac, 50 Hz, 2-Pole, Box Lugs, Non-Reversing
- HUBBELL WIRING DEVICE-KELLEMS HBL6750C13GY
- WEG 02036OP3V254JM Electric Motor, 20Hp
Explore More
- ECCO
- KEYSHAFT
- START INTERNATIONAL
- SYNFLEX
- LENNOX
- Ropes
- Low Voltage Thermostats
- Wired Intercom Systems
- Wired Intercom Accessories
- Slump Testing
- HELICOIL Roughing Taps
- DESTACO 334-M Series Pull Action Latch Clamps
- ANVIL Series 8501 / 8502 Brass Gate Valves, NRS Full Port, 200CWP
- PLASTIC SUPPLY Elbow Pvc 45 Degree
- GENERAL PIPE CLEANERS Kinetic Water Ram Series Drain Cleaners
- MARTIN SPROCKET 5050 Taper Bushings
- T&S Gas Hose Kits
- SPEAKMAN Lura CPT-1123 Series Transfer Valve Trims
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
GROVE GEAR NH8300278.00 NH-BMQ830-7.5-D-180 Worm Reducer, 7.5:1 Ratio, 1.125 Inch I.D, 1.25 Inch O.D, Cast Iron
€2,220.88 /unit